NWSA TT1 EXAM 2 QUESTIONS WITH 100%
CORRECT ANSWERS
American National Standards Institute (ANSI)
Who is the third-party group that approves and endorses standards?
Standards
What term is used to describe the documents written by members, or peers, in the industry.
Industry Standards
Company's Health, Safety and Environment policy should be a combination of Labor
Regulations and _________?
Employer
Where OSHA has not promulgated specific standards, who is responsible for following the act's
general duty clause?
The whole crew
On a job site who should be involved in the JHA process?
Scope of Work
What does the term SOW stand for?
Job Hazard Assessment
What does the term SOW stand for?
3 feet
When using an extension ladder, how many feet past the platform must it extend?
4 feet
If you have a sixteen-foot ladder leaning against a building wall, how many feet from the wall
does the case need to be to provide the correct slope?
, Personal Protective Equipment
What do the letters PPE stand for?
-Senses a short circuit.
-Prevents electrocution.
-Shuts off the flow of electricity
What does a ground fault circuit Interrupter (GFCI) do?
Employer
Who is responsible for providing the applicable PPE for a work site?
Shoulder level or above
When using a Y-lanyard attached to your back d-ring, at what height should the connection to
your anchorage be place? Extend?
Nine inches
What is the maximum distance between the sternal d-ring and the fixed safety climb?
Four feet
When calculating a fall distance using a "6 foot" energy absorber, what is the maximum pull out
distance?
Two times the arresting force or 3,000 lbs.
When calculating a fall distance using a "6 foot" energy absorber, what is the maximum pull out
distance?
5,000 lbs
What minimum force must a non-engineered anchor be able to withstand for fall protection use?
3,600 lbs
What minimum force must an engineered anchor be able to withstand for fall protection use?
3,600 lbs
CORRECT ANSWERS
American National Standards Institute (ANSI)
Who is the third-party group that approves and endorses standards?
Standards
What term is used to describe the documents written by members, or peers, in the industry.
Industry Standards
Company's Health, Safety and Environment policy should be a combination of Labor
Regulations and _________?
Employer
Where OSHA has not promulgated specific standards, who is responsible for following the act's
general duty clause?
The whole crew
On a job site who should be involved in the JHA process?
Scope of Work
What does the term SOW stand for?
Job Hazard Assessment
What does the term SOW stand for?
3 feet
When using an extension ladder, how many feet past the platform must it extend?
4 feet
If you have a sixteen-foot ladder leaning against a building wall, how many feet from the wall
does the case need to be to provide the correct slope?
, Personal Protective Equipment
What do the letters PPE stand for?
-Senses a short circuit.
-Prevents electrocution.
-Shuts off the flow of electricity
What does a ground fault circuit Interrupter (GFCI) do?
Employer
Who is responsible for providing the applicable PPE for a work site?
Shoulder level or above
When using a Y-lanyard attached to your back d-ring, at what height should the connection to
your anchorage be place? Extend?
Nine inches
What is the maximum distance between the sternal d-ring and the fixed safety climb?
Four feet
When calculating a fall distance using a "6 foot" energy absorber, what is the maximum pull out
distance?
Two times the arresting force or 3,000 lbs.
When calculating a fall distance using a "6 foot" energy absorber, what is the maximum pull out
distance?
5,000 lbs
What minimum force must a non-engineered anchor be able to withstand for fall protection use?
3,600 lbs
What minimum force must an engineered anchor be able to withstand for fall protection use?
3,600 lbs
