NWSA TT1 EXAM 7 QUESTIONS WITH 100%
CORRECT ANSWERS
Who is the third-party group that approves and endorses standards?
American National Standards Institute (ANSI)
What term is used to describe the documents written by members, or peers, in the industry.
Standards
Company's Health, Safety and Environment policy should be a combination of Labor
Regulations and _________?
Industry Standards
Where OSHA has not promulgated specific standards, who is responsible for following the
act's general duty clause?
Employer
On a job site who should be involved in the JHA process?
The whole crew
What does the term SOW stand for?
Scope of Work
What does the term SOW stand for?
Job Hazard Assessment
When using an extension ladder, how many feet past the platform must it extend?
3 feet
If you have a sixteen-foot ladder leaning against a building wall, how many feet from the
wall does the case need to be to provide the correct slope?
4 feet
, What do the letters PPE stand for?
Personal Protective Equipment
What does a ground fault circuit Interrupter (GFCI) do?
-Senses a short circuit.
-Prevents electrocution.
-Shuts off the flow of electricity
Who is responsible for providing the applicable PPE for a work site?
Employer
When using a Y-lanyard attached to your back d-ring, at what height should the
connection to your anchorage be place? Extend?
Shoulder level or above
What is the maximum distance between the sternal d-ring and the fixed safety climb?
Nine inches
When calculating a fall distance using a "6 foot" energy absorber, what is the maximum
pull out distance?
Four feet
When calculating a fall distance using a "6 foot" energy absorber, what is the maximum
pull out distance?
Two times the arresting force or 3,000 lbs.
What minimum force must a non-engineered anchor be able to withstand for fall
protection use?
5,000 lbs
What minimum force must an engineered anchor be able to withstand for fall protection
use?
3,600 lbs
CORRECT ANSWERS
Who is the third-party group that approves and endorses standards?
American National Standards Institute (ANSI)
What term is used to describe the documents written by members, or peers, in the industry.
Standards
Company's Health, Safety and Environment policy should be a combination of Labor
Regulations and _________?
Industry Standards
Where OSHA has not promulgated specific standards, who is responsible for following the
act's general duty clause?
Employer
On a job site who should be involved in the JHA process?
The whole crew
What does the term SOW stand for?
Scope of Work
What does the term SOW stand for?
Job Hazard Assessment
When using an extension ladder, how many feet past the platform must it extend?
3 feet
If you have a sixteen-foot ladder leaning against a building wall, how many feet from the
wall does the case need to be to provide the correct slope?
4 feet
, What do the letters PPE stand for?
Personal Protective Equipment
What does a ground fault circuit Interrupter (GFCI) do?
-Senses a short circuit.
-Prevents electrocution.
-Shuts off the flow of electricity
Who is responsible for providing the applicable PPE for a work site?
Employer
When using a Y-lanyard attached to your back d-ring, at what height should the
connection to your anchorage be place? Extend?
Shoulder level or above
What is the maximum distance between the sternal d-ring and the fixed safety climb?
Nine inches
When calculating a fall distance using a "6 foot" energy absorber, what is the maximum
pull out distance?
Four feet
When calculating a fall distance using a "6 foot" energy absorber, what is the maximum
pull out distance?
Two times the arresting force or 3,000 lbs.
What minimum force must a non-engineered anchor be able to withstand for fall
protection use?
5,000 lbs
What minimum force must an engineered anchor be able to withstand for fall protection
use?
3,600 lbs
