WRT EXAM
1 cubic foot of water contains ______ gallons
7.48
One gallon of water weighs _______ pounds
8.34
The most critical course of action in restorative drying is to _____ ______
Respond Quickly
All restorers should follow the standard of care for the water restoration profession
developed by the restoration industry entitled the IICRC ________
S500
To help protect technicians from the many hazards associated with contaminated
water losses, restorers need to have ready access to several items. These items
protect for all ________ ________ to the body
potential exposures
,Respiratory protection regulations state that the employer must provide
1.medical eval
2.fit testing
3.training
As a minimum medical requirement, technicians performing water damage
restoration services need medical consultation with their ________ ________ ________
________ for appropriate immunizations
Primary health care physician
The contract clearly states the agreement between the building owner and the
restoration contractor. The form specifies who is responsible for payment and should
be signed ________ work begins
Before
The technician's first responsibility when arriving at a water damaged sites is to
identify, communicate and eliminate ________ ________
safety hazards
,The most common safety hazards associated with water damaged structures result
in ________ and ________
slips and falls
Federal regulations apply to the handling of ________ based paint and asbestos
lead
after safety concerns have been addressed and the initial water source has been
stopped, the restorer must complete an evaluation of the water's migration through
the structure. During this process, the restorer inspects all ________ ________ areas
potentially affected
the ultimate goal is to find the "edge" of water migration, which moves in a three-
dimensional path throughout the structure. This is accomplished across carpeted
surfaces using a ________ ________, and across most hard surfaces using a ________
(non-penetrating) moisture meter.
-moisture sensor
-non-invasive
Water from a clean source with no substantial risk of causing sickness or discomfort
is said to be ________ ________ water
, Category one
Water that has a significant degree of chemical, biological, and/or physical
contamination and potential to cause sickness or discomfort is ________ ________
water
Category two
When water intrusion results from a grossly unsanitary source or carries ________
(disease causing) agents, it is said to be a Category 3
Pathogenic
Worker and occupant ________ and safety are the first priority on every sewage loss.
Areas affected by Category 3 water intrusion are marked and posted as potentially
hazardous
Health
When resistance is encountered and performing proper services in a category 3
water loss become a challenge, restorers ________ ________ immediately and prevent
liability
Stop Work
1 cubic foot of water contains ______ gallons
7.48
One gallon of water weighs _______ pounds
8.34
The most critical course of action in restorative drying is to _____ ______
Respond Quickly
All restorers should follow the standard of care for the water restoration profession
developed by the restoration industry entitled the IICRC ________
S500
To help protect technicians from the many hazards associated with contaminated
water losses, restorers need to have ready access to several items. These items
protect for all ________ ________ to the body
potential exposures
,Respiratory protection regulations state that the employer must provide
1.medical eval
2.fit testing
3.training
As a minimum medical requirement, technicians performing water damage
restoration services need medical consultation with their ________ ________ ________
________ for appropriate immunizations
Primary health care physician
The contract clearly states the agreement between the building owner and the
restoration contractor. The form specifies who is responsible for payment and should
be signed ________ work begins
Before
The technician's first responsibility when arriving at a water damaged sites is to
identify, communicate and eliminate ________ ________
safety hazards
,The most common safety hazards associated with water damaged structures result
in ________ and ________
slips and falls
Federal regulations apply to the handling of ________ based paint and asbestos
lead
after safety concerns have been addressed and the initial water source has been
stopped, the restorer must complete an evaluation of the water's migration through
the structure. During this process, the restorer inspects all ________ ________ areas
potentially affected
the ultimate goal is to find the "edge" of water migration, which moves in a three-
dimensional path throughout the structure. This is accomplished across carpeted
surfaces using a ________ ________, and across most hard surfaces using a ________
(non-penetrating) moisture meter.
-moisture sensor
-non-invasive
Water from a clean source with no substantial risk of causing sickness or discomfort
is said to be ________ ________ water
, Category one
Water that has a significant degree of chemical, biological, and/or physical
contamination and potential to cause sickness or discomfort is ________ ________
water
Category two
When water intrusion results from a grossly unsanitary source or carries ________
(disease causing) agents, it is said to be a Category 3
Pathogenic
Worker and occupant ________ and safety are the first priority on every sewage loss.
Areas affected by Category 3 water intrusion are marked and posted as potentially
hazardous
Health
When resistance is encountered and performing proper services in a category 3
water loss become a challenge, restorers ________ ________ immediately and prevent
liability
Stop Work
