Ground School Exam 3 UPDATED
ACTUAL Exam Questions and CORRECT
Answers
How many login attempts are provided before a message is sent to the security officer? -
CORRECT ANSWER -3
Over the horizon capability and communication over the tactical internet is accomplished using
what? - CORRECT ANSWER - Blue force tracker (BFT)
Is the username/password file held in the IDM after shutdown? - CORRECT ANSWER -
No
What does the receive message filter list allow the operator to do what? - CORRECT
ANSWER - Select the type of message that will be reieved
What does the operator need to do if he wants JVMF to automatically acknowledge a message
when it is opened? - CORRECT ANSWER - Set (OPERTOR ACK) on the setup page to
AUTO
How does the operator manually load JVMF files from the PCMCIA? - CORRECT
ANSWER - By using the FILE LOAD feature on the setup page
What does the > symbol mean before a message line on the Inbox page? - CORRECT
ANSWER - The message has not yet been opened
What does the ? symbol mean before a message line on the Inbox page? - CORRECT
ANSWER - The sender has requested an acknowledgement
A MAYDAY message defaults to - CORRECT ANSWER - Downed Aircraft
,When would you need to use the RESEND bezel key on the XMIT STATUS page? - CORRECT
ANSWER - When the status of the sent message is shown as TIMEOUT
The two external components that provide display information to the ESIS are - CORRECT
ANSWER - ADC and Magnetometer
The BATTERY STBY INST switch is located where in the cockpit? - CORRECT
ANSWER - Upper console
A beeping tone can be heard when the aircraft is on the ground with AC power removed if the
BATTERY STBY INST switch is in which position? - CORRECT ANSWER - ARM
The ESIS battery should supply power to the instrument for at least ______________. -
CORRECT ANSWER - 30 mins
What do you do if you have a Dual EGI Failure - CORRECT ANSWER - - Transition to
ESIS display.
- EGI switches — OFF, then ON
Dual EGI failure results in __________information, ______ and ________ display on the PFD.
If SAS FPS is coupled, the flight director will automatically disengage. During AFCS degraded
operation, the helicopter must be ___________ - CORRECT ANSWER - Dual EGI failure
results in LOSS OF NAVIGATION information, HEADING and ATTITUDE display on the
PFD. If SAS FPS is coupled, the flight director will automatically disengage. During AFCS
degraded operation, the helicopter must be FLOWN MANUALLY
When the APU Fire T-handle is activated, what three things occur? - CORRECT
ANSWER - 1) Fuel to the APU is shut off
2) A stop signal is sent to the ESU
3) The fire extinguishing system arms and the directional control value is set to the APU
compartment
, FIRE EXTGH switch - MAIN/RESERVE as required
In high ambient temp if the APU OIL HOT caution comes on or the OIL HOT capsule
illuminates what do you do? - CORRECT ANSWER - 1) APU should be shut down
immediately to prevent damage
2) After 30-mins cooling period (check oil level)
3) If okay, APU may be restarted
How many chambers are in the APU accumulator? - CORRECT ANSWER -4
What is the purpose of the APU? - CORRECT ANSWER - The APU system provides
pneumatic power for main engine starting and cabin heating, and electrical power for ground
operations and emergency in-flight electrical operations
What does the APU provide? On the ground and during emergencies? - CORRECT
ANSWER - APU is your heat source on the ground without engines operating
gives us. Electrical power for on ground operations and in flight emergencies
How much fuel does the APU use? - CORRECT ANSWER - 120 lbs per hour from the #1
tank
APU operation at ambient temp of _______ degrees C is limited to _______ mins
With engine and rotor not operating, the APU may be operated continuously up to an ambient
temperature of _____ If APU OIL HOT caution appears a ______cooling period is required, -
CORRECT ANSWER - APU operation at ambient temp of 43 degrees and greater is
limited to 30 mins
With engine and rotor not operating, the APU may be operated continuously up to an ambient
temperature of 51°C If APU OIL HOT caution appears a 30 minute cooling period is required
ACTUAL Exam Questions and CORRECT
Answers
How many login attempts are provided before a message is sent to the security officer? -
CORRECT ANSWER -3
Over the horizon capability and communication over the tactical internet is accomplished using
what? - CORRECT ANSWER - Blue force tracker (BFT)
Is the username/password file held in the IDM after shutdown? - CORRECT ANSWER -
No
What does the receive message filter list allow the operator to do what? - CORRECT
ANSWER - Select the type of message that will be reieved
What does the operator need to do if he wants JVMF to automatically acknowledge a message
when it is opened? - CORRECT ANSWER - Set (OPERTOR ACK) on the setup page to
AUTO
How does the operator manually load JVMF files from the PCMCIA? - CORRECT
ANSWER - By using the FILE LOAD feature on the setup page
What does the > symbol mean before a message line on the Inbox page? - CORRECT
ANSWER - The message has not yet been opened
What does the ? symbol mean before a message line on the Inbox page? - CORRECT
ANSWER - The sender has requested an acknowledgement
A MAYDAY message defaults to - CORRECT ANSWER - Downed Aircraft
,When would you need to use the RESEND bezel key on the XMIT STATUS page? - CORRECT
ANSWER - When the status of the sent message is shown as TIMEOUT
The two external components that provide display information to the ESIS are - CORRECT
ANSWER - ADC and Magnetometer
The BATTERY STBY INST switch is located where in the cockpit? - CORRECT
ANSWER - Upper console
A beeping tone can be heard when the aircraft is on the ground with AC power removed if the
BATTERY STBY INST switch is in which position? - CORRECT ANSWER - ARM
The ESIS battery should supply power to the instrument for at least ______________. -
CORRECT ANSWER - 30 mins
What do you do if you have a Dual EGI Failure - CORRECT ANSWER - - Transition to
ESIS display.
- EGI switches — OFF, then ON
Dual EGI failure results in __________information, ______ and ________ display on the PFD.
If SAS FPS is coupled, the flight director will automatically disengage. During AFCS degraded
operation, the helicopter must be ___________ - CORRECT ANSWER - Dual EGI failure
results in LOSS OF NAVIGATION information, HEADING and ATTITUDE display on the
PFD. If SAS FPS is coupled, the flight director will automatically disengage. During AFCS
degraded operation, the helicopter must be FLOWN MANUALLY
When the APU Fire T-handle is activated, what three things occur? - CORRECT
ANSWER - 1) Fuel to the APU is shut off
2) A stop signal is sent to the ESU
3) The fire extinguishing system arms and the directional control value is set to the APU
compartment
, FIRE EXTGH switch - MAIN/RESERVE as required
In high ambient temp if the APU OIL HOT caution comes on or the OIL HOT capsule
illuminates what do you do? - CORRECT ANSWER - 1) APU should be shut down
immediately to prevent damage
2) After 30-mins cooling period (check oil level)
3) If okay, APU may be restarted
How many chambers are in the APU accumulator? - CORRECT ANSWER -4
What is the purpose of the APU? - CORRECT ANSWER - The APU system provides
pneumatic power for main engine starting and cabin heating, and electrical power for ground
operations and emergency in-flight electrical operations
What does the APU provide? On the ground and during emergencies? - CORRECT
ANSWER - APU is your heat source on the ground without engines operating
gives us. Electrical power for on ground operations and in flight emergencies
How much fuel does the APU use? - CORRECT ANSWER - 120 lbs per hour from the #1
tank
APU operation at ambient temp of _______ degrees C is limited to _______ mins
With engine and rotor not operating, the APU may be operated continuously up to an ambient
temperature of _____ If APU OIL HOT caution appears a ______cooling period is required, -
CORRECT ANSWER - APU operation at ambient temp of 43 degrees and greater is
limited to 30 mins
With engine and rotor not operating, the APU may be operated continuously up to an ambient
temperature of 51°C If APU OIL HOT caution appears a 30 minute cooling period is required
