Computer Skills Placement Objectives CSP -
Accurate Solutions For Every Question
Hardware Correct Answer - Computer case, keyboard, and
monitor
Sofware Correct Answer - Organized information in the form
of operating systems, utilities, programs, and applications that
enable computers to work.
Information Technology (IT) Correct Answer - Any computer-
based tool that people use to work with information and support the
information and information-processing needs of an organization
Central Processing Unit (CPU) Correct Answer - Brain of the
computer that performs instructions defined by software
Hard Disk Correct Answer - A data storage unit inside a
computer that can store a large quantity of data (60GB or more)
Input Correct Answer - Data that is entered into the computer
system via an input or storage device.
Output Correct Answer - Data that is send out of the computer.
Peripheral Device Correct Answer - Devices that communicate
with the CPU but are not located directly on the motherboard(not
part of the computer), such as the monitor, floppy drive, printer, and
mouse.
CPU Speed Correct Answer - Measured in MHz (Megahertz) or
GHz (Gigahertz).
Also referred to as the CPU clock.
, RAM Speed Correct Answer - Measure in MHz or Bytes. This
measured the amount of time it takes the module to deliver a data
request
CPU Functions Correct Answer - Fetch, Decode, Execute and
Store
Fetch Correct Answer - Each instruction is stored in memory
and has its own address. The processor takes this address number
from the program counter, which is responsible for tracking which
instructions the CPU should execute next.
Decode Correct Answer - Decode: All programs to be executed
are translated to into Assembly instructions. Assembly code must be
decoded into binary instructions, which are understandable to your
CPU. This step is called decodin
Execute Correct Answer - While executing instructions the
CPU can do one of three things: Do calculations with its ALU, move
data from one memory location to another, or jump to a different
address.
Store Correct Answer - The CPU must give feedback after
executing an instruction, and the output data is written to the
memory.
Random Access Memory(RAM) & Read Only Memory (ROM)
Correct Answer - RAM is used for both read and write while
ROM is used only for reading.
Random Access Memory(RAM) & Read Only Memory (ROM)
Correct Answer - RAM is volatile and is erased when the
Accurate Solutions For Every Question
Hardware Correct Answer - Computer case, keyboard, and
monitor
Sofware Correct Answer - Organized information in the form
of operating systems, utilities, programs, and applications that
enable computers to work.
Information Technology (IT) Correct Answer - Any computer-
based tool that people use to work with information and support the
information and information-processing needs of an organization
Central Processing Unit (CPU) Correct Answer - Brain of the
computer that performs instructions defined by software
Hard Disk Correct Answer - A data storage unit inside a
computer that can store a large quantity of data (60GB or more)
Input Correct Answer - Data that is entered into the computer
system via an input or storage device.
Output Correct Answer - Data that is send out of the computer.
Peripheral Device Correct Answer - Devices that communicate
with the CPU but are not located directly on the motherboard(not
part of the computer), such as the monitor, floppy drive, printer, and
mouse.
CPU Speed Correct Answer - Measured in MHz (Megahertz) or
GHz (Gigahertz).
Also referred to as the CPU clock.
, RAM Speed Correct Answer - Measure in MHz or Bytes. This
measured the amount of time it takes the module to deliver a data
request
CPU Functions Correct Answer - Fetch, Decode, Execute and
Store
Fetch Correct Answer - Each instruction is stored in memory
and has its own address. The processor takes this address number
from the program counter, which is responsible for tracking which
instructions the CPU should execute next.
Decode Correct Answer - Decode: All programs to be executed
are translated to into Assembly instructions. Assembly code must be
decoded into binary instructions, which are understandable to your
CPU. This step is called decodin
Execute Correct Answer - While executing instructions the
CPU can do one of three things: Do calculations with its ALU, move
data from one memory location to another, or jump to a different
address.
Store Correct Answer - The CPU must give feedback after
executing an instruction, and the output data is written to the
memory.
Random Access Memory(RAM) & Read Only Memory (ROM)
Correct Answer - RAM is used for both read and write while
ROM is used only for reading.
Random Access Memory(RAM) & Read Only Memory (ROM)
Correct Answer - RAM is volatile and is erased when the
