J-STD Exam Questions and Answers 100% Solved| Latest Update Graded A+
IPC stands for... The Institute for Interconnecting and Packaging Electronic Circuits
1.3 - Class 1 Electronics General Electronics Product ~$1-$100 value
1.3 - Class 2 Electronics Dedicated Service Electronic Products
~$100-$20,000
1.3 - Class 3 Electronics High Performance/Harsh Environment Products
~$20,000 and up
1.5 - What does NAPD stand for? No Standard Exists
Acceptable
Process Departure, needs corrected
Defect
1.5 - A1P2D3 Class 1 Acceptable
Class 2 Process Departure
Class 3 Defect
1.5 - N1D2D3 Class 1 No Standard Exists
Class 2 Defect
Class 3 Defect
1.5 - D1D2D3 Class 1 Defect
Class 2 Defect
Class 3 Defect
, 1.7.1 - Conflict between J-STD Text and applicable document cited in J-STD, which takes
precedent? J-STD text
1.7.1 - Conflict between J-STD Text and assembly drawing/documentation not approved by
User, which takes precedent? J-STD
1.7.1 - Conflict between J-STD Text and assembly drawing/documentation approved by User,
which takes precedent? Assembly Drawing or Documentation
1.8.3 - What does FOD stand for? Foreign Object Debris
1.8.12 - Define "User" The Individual, Organization, company, or designated authority
responsible for procurement or design.
1.8.13 - Wire Overwrap Wire wraps around terminal more than 360 degrees and remains in
contact.
1.9 - If a condition is considered a Defect for Class 3, this means Class 1 and 2... May still be
usable.
1.9 - If a condition is considered a Defect for Class 1, this means Class 3 and 2... Will also be
a defect
1.9 - Requirements Flow down -If J-STD is contractually required then... the requirements
shall be imposed on subassembly drawings, PO's, and subcontracts.
1.9 - Design and workmanship of COTS items should be... evaluated and modified as
required to ensure end item meets contract performance standards.
IPC stands for... The Institute for Interconnecting and Packaging Electronic Circuits
1.3 - Class 1 Electronics General Electronics Product ~$1-$100 value
1.3 - Class 2 Electronics Dedicated Service Electronic Products
~$100-$20,000
1.3 - Class 3 Electronics High Performance/Harsh Environment Products
~$20,000 and up
1.5 - What does NAPD stand for? No Standard Exists
Acceptable
Process Departure, needs corrected
Defect
1.5 - A1P2D3 Class 1 Acceptable
Class 2 Process Departure
Class 3 Defect
1.5 - N1D2D3 Class 1 No Standard Exists
Class 2 Defect
Class 3 Defect
1.5 - D1D2D3 Class 1 Defect
Class 2 Defect
Class 3 Defect
, 1.7.1 - Conflict between J-STD Text and applicable document cited in J-STD, which takes
precedent? J-STD text
1.7.1 - Conflict between J-STD Text and assembly drawing/documentation not approved by
User, which takes precedent? J-STD
1.7.1 - Conflict between J-STD Text and assembly drawing/documentation approved by User,
which takes precedent? Assembly Drawing or Documentation
1.8.3 - What does FOD stand for? Foreign Object Debris
1.8.12 - Define "User" The Individual, Organization, company, or designated authority
responsible for procurement or design.
1.8.13 - Wire Overwrap Wire wraps around terminal more than 360 degrees and remains in
contact.
1.9 - If a condition is considered a Defect for Class 3, this means Class 1 and 2... May still be
usable.
1.9 - If a condition is considered a Defect for Class 1, this means Class 3 and 2... Will also be
a defect
1.9 - Requirements Flow down -If J-STD is contractually required then... the requirements
shall be imposed on subassembly drawings, PO's, and subcontracts.
1.9 - Design and workmanship of COTS items should be... evaluated and modified as
required to ensure end item meets contract performance standards.
