FOA CFOT Multiple-choice Questions And Answers | Verified
1. Outside plant cabling can be installed by D
A. Pulling in underground in conduit
B. Direction burial
C. Aerial suspension
D. All of the above
2. Underground cable generally includes a gel, powder C
or tape for protection from
A. Pulling friction
B. Lightning strikes
C. Moisture
D. fiber ablation
3. Armored cable is used in outside plant installation to A.
A. Prevent rodent damage
B. Protect from dig up damage
C. Increase pulling tension
D. Conduct lightning strikes
4. Concatenation or the joining of two cables in a long B
outside plant run is most always done by
A. Mechanical splicing
B. Fusion splicing
C. Field installation of connectors
D. Splicing on a pigtailed connector
5. Premise cables in LAN backbones often contain C
A. Only multimode fiber
, FOA CFOT Multiple-choice Questions And Answers | Verified
B. Only singlemode fiber
C. Both multimode and singlemode fiber
D. Plastic optical Fiber
6. Premises cables must be rated for to meet codes D
A. Pull strength
B. Bend radius
C. Weight in cable trays
D. Fire retardant
7. The protective gear every VDV installer must always A
wear is
A. Eye protection
B. Plastic Apron
C. Gloves
D. Shoe Covers
8. Information on the safety of chemical used in fiber B
optics are
A. Available on the national of institutes of health
B. In MSDS sheets supplied by the manufacture
C. Required to be in every installer tool kit
D. Rarely useful
9. Always keep on connectors when not connect- D
ed to equipment or being tested
A. Mating Adapter
B. Strain of relief boots
1. Outside plant cabling can be installed by D
A. Pulling in underground in conduit
B. Direction burial
C. Aerial suspension
D. All of the above
2. Underground cable generally includes a gel, powder C
or tape for protection from
A. Pulling friction
B. Lightning strikes
C. Moisture
D. fiber ablation
3. Armored cable is used in outside plant installation to A.
A. Prevent rodent damage
B. Protect from dig up damage
C. Increase pulling tension
D. Conduct lightning strikes
4. Concatenation or the joining of two cables in a long B
outside plant run is most always done by
A. Mechanical splicing
B. Fusion splicing
C. Field installation of connectors
D. Splicing on a pigtailed connector
5. Premise cables in LAN backbones often contain C
A. Only multimode fiber
, FOA CFOT Multiple-choice Questions And Answers | Verified
B. Only singlemode fiber
C. Both multimode and singlemode fiber
D. Plastic optical Fiber
6. Premises cables must be rated for to meet codes D
A. Pull strength
B. Bend radius
C. Weight in cable trays
D. Fire retardant
7. The protective gear every VDV installer must always A
wear is
A. Eye protection
B. Plastic Apron
C. Gloves
D. Shoe Covers
8. Information on the safety of chemical used in fiber B
optics are
A. Available on the national of institutes of health
B. In MSDS sheets supplied by the manufacture
C. Required to be in every installer tool kit
D. Rarely useful
9. Always keep on connectors when not connect- D
ed to equipment or being tested
A. Mating Adapter
B. Strain of relief boots
