PA MOTOR VEHICLE PHYSICAL DAMAGE APPRAISER -
PRACTICE EXAM 100+ QUESTIONS CORRECTLY ANSWERED &
VERIFIED|GRADED A+
1. Which one of the following components is NOT considered part of the vehicle's
front end?
a) Grille
b) Fenders
c) Floor Pan
d) Hood - ANSWER c) floor pan
2. Which one of the following answer choices lists the three components that
make up the front end sheet metal of an auto?
a) Grille, hood and fenders
b) Grille, hood and headlamps
c) Fender skirt, fender outer panel and strut tower
d) Moldings, ornamentation and grille - ANSWER a) Grille, hood and fenders
3. Which one of the following answer choices lists the two components that are
part of a hood's lock assembly?
a) Release cable and support rod
b) Pop-up spring and release cable
c) Pop-up spring and safety catch
d) Pop-up spring and hinges - ANSWER c) Pop-up spring and safety catch
,4. What type of headlamp features a lens that is specifically designed for the auto
model and contoured to its requirements for improved aerodynamics?
a) Sealed composite
b) Sealed beam
c) Composite beam
d) Composite - ANSWER d) Composite
5.Which one of the following is considered part of the cowl?
a) Fender
b) Vent panel
c) Grille
d) Quarter panel - ANSWER b) Vent panel
The outer rocker panel is NOT welded to which of the following components?
a) Inner rocker panel
b) Floor pan
c) Roof outer panel
d) Quarter panel assembly - ANSWER c) Roof outer panel
6.What component forms the base of the car?
a) Firewall
b) Rocker panel
c) Cowl
d) Floor pan - ANSWER d) Floor pan
,7. Which one of the following is NOT a purpose of pillars?
a) Provide support for the front end
b) Provide support to the roof
c) Serve as mounting posts for door hinges
d) Serve as mounting posts for door lock strikers - ANSWER a) Provide support for
the front end
8. What component runs underneath the doors between the front and rear
fenders on the left and right sides of the vehicle?
a) Firewall
b) Cowl
c) Floor pan
d) Rocker panel - ANSWER d) Rocker panel
9. What component forms the housing for the rear wheels?
a) Quarter panels
b) Quarter wheelhouses
c) Sail panels
d) Fenders - ANSWER b) Quarter wheelhouses
10. Moldings that are positioned just below the window openings are called_____
moldings.
a) Belt
b) Wheel opening
c) Side
, d) Trim - ANSWER a) Belt
11. A car's quarter panel would NOT include which of the following components?
a) The cowl
b) Wheel opening, side or belt moldings
c) Side marker lamp
d) Fuel door - ANSWER a) The cowl
12. What component forms the rear side of the automobile?
a) Pillars
b) Quarter panels
c) Fenders
d) Quarter wheelhouses - ANSWER b) Quarter panels
13. The fabric or cardboard-like lining that covers the inner roof panel and roof
bows is called the
a) Vibration damper
b) Scalp molding
c) Headliner
d) Insulator pad - ANSWER c) Headliner
14. What component found below the rear window on the inside of the vehicle
serves as a shelf and provides internal bracing?
a) Firewall
b) Rear lower body panel
PRACTICE EXAM 100+ QUESTIONS CORRECTLY ANSWERED &
VERIFIED|GRADED A+
1. Which one of the following components is NOT considered part of the vehicle's
front end?
a) Grille
b) Fenders
c) Floor Pan
d) Hood - ANSWER c) floor pan
2. Which one of the following answer choices lists the three components that
make up the front end sheet metal of an auto?
a) Grille, hood and fenders
b) Grille, hood and headlamps
c) Fender skirt, fender outer panel and strut tower
d) Moldings, ornamentation and grille - ANSWER a) Grille, hood and fenders
3. Which one of the following answer choices lists the two components that are
part of a hood's lock assembly?
a) Release cable and support rod
b) Pop-up spring and release cable
c) Pop-up spring and safety catch
d) Pop-up spring and hinges - ANSWER c) Pop-up spring and safety catch
,4. What type of headlamp features a lens that is specifically designed for the auto
model and contoured to its requirements for improved aerodynamics?
a) Sealed composite
b) Sealed beam
c) Composite beam
d) Composite - ANSWER d) Composite
5.Which one of the following is considered part of the cowl?
a) Fender
b) Vent panel
c) Grille
d) Quarter panel - ANSWER b) Vent panel
The outer rocker panel is NOT welded to which of the following components?
a) Inner rocker panel
b) Floor pan
c) Roof outer panel
d) Quarter panel assembly - ANSWER c) Roof outer panel
6.What component forms the base of the car?
a) Firewall
b) Rocker panel
c) Cowl
d) Floor pan - ANSWER d) Floor pan
,7. Which one of the following is NOT a purpose of pillars?
a) Provide support for the front end
b) Provide support to the roof
c) Serve as mounting posts for door hinges
d) Serve as mounting posts for door lock strikers - ANSWER a) Provide support for
the front end
8. What component runs underneath the doors between the front and rear
fenders on the left and right sides of the vehicle?
a) Firewall
b) Cowl
c) Floor pan
d) Rocker panel - ANSWER d) Rocker panel
9. What component forms the housing for the rear wheels?
a) Quarter panels
b) Quarter wheelhouses
c) Sail panels
d) Fenders - ANSWER b) Quarter wheelhouses
10. Moldings that are positioned just below the window openings are called_____
moldings.
a) Belt
b) Wheel opening
c) Side
, d) Trim - ANSWER a) Belt
11. A car's quarter panel would NOT include which of the following components?
a) The cowl
b) Wheel opening, side or belt moldings
c) Side marker lamp
d) Fuel door - ANSWER a) The cowl
12. What component forms the rear side of the automobile?
a) Pillars
b) Quarter panels
c) Fenders
d) Quarter wheelhouses - ANSWER b) Quarter panels
13. The fabric or cardboard-like lining that covers the inner roof panel and roof
bows is called the
a) Vibration damper
b) Scalp molding
c) Headliner
d) Insulator pad - ANSWER c) Headliner
14. What component found below the rear window on the inside of the vehicle
serves as a shelf and provides internal bracing?
a) Firewall
b) Rear lower body panel
