USPA Sky Diving
, USPA Skydiving
USPA Skydiving a License Exam Study Guide (Explore 40 Questions)
With Complete Verified Solutions Latest Update.
What is the recommended minimum breakoff altitude for free fall groups of five or
fewer? - ✔✔✔1,500 feet above the highest planned deployment altitude
What is the danger of entering a toggle turn too quickly? - ✔✔✔line twist
How can you avoid the propeller(s) while approaching an airplane? - ✔✔✔approach
only from the rear and behind the wing
What is the biggest danger of a hard toggle turn near the ground? - ✔✔✔1) Line twist
2) Hard landing while still in a turn
3) Collision with other jumpers
What should be your first response in the event of a canopy collision and entanglement
with another jumper? - ✔✔✔check altitude and communicate with the other jumper
What should you pay attention to when closing a main container equipped with a hand
deployed pilot chute? - ✔✔✔1) Bridle routing
2) Closing loop tension
3) Flap order
When the brake system uses Velcro, why is it a good idea to place your toggles back on
the Velcro after you land? - ✔✔✔To prevent wear and tear on the lower steering lines
®™
, USPA Skydiving
USPA Skydiving a License Exam Study Guide (Explore 40 Questions)
With Complete Verified Solutions Latest Update.
What is the recommended minimum breakoff altitude for free fall groups of five or
fewer? - ✔✔✔1,500 feet above the highest planned deployment altitude
What is the danger of entering a toggle turn too quickly? - ✔✔✔line twist
How can you avoid the propeller(s) while approaching an airplane? - ✔✔✔approach
only from the rear and behind the wing
What is the biggest danger of a hard toggle turn near the ground? - ✔✔✔1) Line twist
2) Hard landing while still in a turn
3) Collision with other jumpers
What should be your first response in the event of a canopy collision and entanglement
with another jumper? - ✔✔✔check altitude and communicate with the other jumper
What should you pay attention to when closing a main container equipped with a hand
deployed pilot chute? - ✔✔✔1) Bridle routing
2) Closing loop tension
3) Flap order
When the brake system uses Velcro, why is it a good idea to place your toggles back on
the Velcro after you land? - ✔✔✔To prevent wear and tear on the lower steering lines
®™
