Page | 1
ADVANCED RIGGING FINAL
EXAMINATION 2025 BRAND NEW ACTUAL
EXAM WITH ANSWERS.
1. While inspecting a round sling, you feel a small knot on the
inside of the cover, what action should be done? - correct
answer -Use the sling because a small knot inside the cover is
typical to find
2. What is the Working Load Limit design factor for chain? -
correct answer -4:1
3. Spreader beams must bear a name plate displaying the: -
correct answer -Manufacturer's name, Rated Capacity, Serial
Number
4. The correct measurement of wire rope diameter is
__________. - correct answer -The largest diameter of a cross
section of wire rope
, Page | 2
5. Permanent distortion of the wires and strands resulting from
sharp bends is a: - correct answer -Kink
6. Which of the following grade of chain sling is authorized for
over-head lifting applications? - correct answer -Grade 8
7. What type of shackle IS recommended for long-term
installation? - correct answer -Bolt type
8. When making a sling using wire rope clips, the "Rule" is
________ - correct answer -Slings cannot be fabricated using
wire rope clips
9. Shackles with crown or pins worn by more than _____ should
be destroyed. - correct answer -10%
10. An older 2 inch shackle is being used as a master link. This
shackle has no markings on it due to its age and you know
what the capacity is of the shackle due to its size. May this
shackle be used in this application? - correct answer -No
, Page | 3
11. When using a chain fall as rigging, how often must a
documented inspection be done? - correct answer -Annually
12. The distance between the bearings surfaces on a chain
sling... - correct answer -Reach
13. Rotation Resistant rope slings are recommended for what
type of lifting operations? - correct answer -Rotation Resistant
ropes may not be used as a slings
14. What is the maximum interval for inspections on all slings,
rigging hardware and below the hook lifting devices? - correct
answer -Yearly
15. What is the difference in documentation requirements
between chain sling and wire rope slings? - correct answer -
Chain slings require that the condition of the individual sling be
recorded, wire rope slings do not require that the condition of
the sling be recorded
ADVANCED RIGGING FINAL
EXAMINATION 2025 BRAND NEW ACTUAL
EXAM WITH ANSWERS.
1. While inspecting a round sling, you feel a small knot on the
inside of the cover, what action should be done? - correct
answer -Use the sling because a small knot inside the cover is
typical to find
2. What is the Working Load Limit design factor for chain? -
correct answer -4:1
3. Spreader beams must bear a name plate displaying the: -
correct answer -Manufacturer's name, Rated Capacity, Serial
Number
4. The correct measurement of wire rope diameter is
__________. - correct answer -The largest diameter of a cross
section of wire rope
, Page | 2
5. Permanent distortion of the wires and strands resulting from
sharp bends is a: - correct answer -Kink
6. Which of the following grade of chain sling is authorized for
over-head lifting applications? - correct answer -Grade 8
7. What type of shackle IS recommended for long-term
installation? - correct answer -Bolt type
8. When making a sling using wire rope clips, the "Rule" is
________ - correct answer -Slings cannot be fabricated using
wire rope clips
9. Shackles with crown or pins worn by more than _____ should
be destroyed. - correct answer -10%
10. An older 2 inch shackle is being used as a master link. This
shackle has no markings on it due to its age and you know
what the capacity is of the shackle due to its size. May this
shackle be used in this application? - correct answer -No
, Page | 3
11. When using a chain fall as rigging, how often must a
documented inspection be done? - correct answer -Annually
12. The distance between the bearings surfaces on a chain
sling... - correct answer -Reach
13. Rotation Resistant rope slings are recommended for what
type of lifting operations? - correct answer -Rotation Resistant
ropes may not be used as a slings
14. What is the maximum interval for inspections on all slings,
rigging hardware and below the hook lifting devices? - correct
answer -Yearly
15. What is the difference in documentation requirements
between chain sling and wire rope slings? - correct answer -
Chain slings require that the condition of the individual sling be
recorded, wire rope slings do not require that the condition of
the sling be recorded
