Click here- Nclex - Stuvia US
Certified Playground Safety Inspector CPSI Sample Exam
Complete Questions and Correct Detailed Answers (Verified
Answers)
To be compliant with ASTM 1487, a designer or manufacturer of playground
equipment should
Ans: provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard exists on
Ans: a partially bounded opening
3. Which of the following is correct regarding the impact-attenuation of surfacing
material
Ans: Critical height must equal or exceed fall height
4. When evaluating the structural integrity of a support structure for a swing that
appears to be failing, a CPSI should
Ans: hire a licensed professional engineer to certify the integrity of the equipment
5. Manufacturers of playground equipment must: provide the manufacturer's
identification of the equipment
Ans:
pg. 1
, Click here- Nclex - Stuvia US
6. The majority of injuries associated with playground equipment result from
Ans: falls to the surface on which the equipment was located
7. An opening may present a common crush or shear hazard only if it
Ans: grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting requirements of
Ans: ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following is correct
Ans: Signage may not prevent accidents but may reduce liability
10. Which of the following factors is MOST important when determining the
frequency of inspections of surfacing
Ans: Type of surfacing and amount of use
11. When planning a playground for public use, the play equipment that is chosen
must
Ans: be appropriate for the age of intended users
pg. 2
Certified Playground Safety Inspector CPSI Sample Exam
Complete Questions and Correct Detailed Answers (Verified
Answers)
To be compliant with ASTM 1487, a designer or manufacturer of playground
equipment should
Ans: provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard exists on
Ans: a partially bounded opening
3. Which of the following is correct regarding the impact-attenuation of surfacing
material
Ans: Critical height must equal or exceed fall height
4. When evaluating the structural integrity of a support structure for a swing that
appears to be failing, a CPSI should
Ans: hire a licensed professional engineer to certify the integrity of the equipment
5. Manufacturers of playground equipment must: provide the manufacturer's
identification of the equipment
Ans:
pg. 1
, Click here- Nclex - Stuvia US
6. The majority of injuries associated with playground equipment result from
Ans: falls to the surface on which the equipment was located
7. An opening may present a common crush or shear hazard only if it
Ans: grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting requirements of
Ans: ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following is correct
Ans: Signage may not prevent accidents but may reduce liability
10. Which of the following factors is MOST important when determining the
frequency of inspections of surfacing
Ans: Type of surfacing and amount of use
11. When planning a playground for public use, the play equipment that is chosen
must
Ans: be appropriate for the age of intended users
pg. 2
