Bicsi Installer 1 Certification
_____ is not identified for new creation and should handiest be used when expanding an
present network of this type.
OS1, OM3, OM2, OM4, OM1 - ANS-OS1
_____ is the standard that covers the shade coding of optical fiber cables.
TIA, 568A, 568B, 598C, article 770 - ANS-TIA-598-C
______ is often used for lengthy-haul transmission structures, information systems requiring
high bandwidth, and lots of optical fiber based totally video distribution systems.
OM4, OM3, OM1, OS1, OM2 - ANS-OS1
______ is not encouraged for new installations.
OS1, OM1, OM2, OM4, OM3 - ANS-OM2
______ can be used for distances as much as 3000m for SCS.
OM1, OS1, OM4, OM3, OM2 - ANS-OS1
Ability of an digital aspect to keep electric energy.
Opposition to a exchange in voltage. - ANS-Capacitance
After you have repaired the problem determined whilst checking out the device, what is the
NEXT step inside the troubleshooting technique?
A. Test the machine
B. Isolate the supply
C. Repair the hassle
D. Document the modifications - ANS-Document the adjustments
All bonding conductors shall hold a minimal bending radius of ______in.
10, 2, 4, 8 - ANS-8 inches
An increase of _____ will bring about a doubling or having of the strength.
6 dB, 4 dB, 1 dB, 3 dB - ANS-three dB
Basic unit of virtual transmission is a ....
Bit, modem, codec, byte - ANS-Bit
Cable system three, first-degree spine - ANS-White cable
Cabling machine 1, horizontal cable - ANS-Blue cable
, Cabling device 2, 2d-degree backbone - ANS-Gray cable
Cat three frequency - ANS-sixteen MHZ Class C
Cat 5e frequency - ANS-a hundred MHz Class D
Cat 6 frequency - ANS-250 MHz Class E
Cat 6e frequency - ANS-500 MHz Class Ea
Cat 7 frequency - ANS-600 MHz
Cat 7a frequency - ANS-one thousand MHz
Cat eight frequency - ANS-2000 MHz
Cat 8.2 frequency - ANS-2000 MHz
Common equipment - ANS-Purple cable
Converts digital to analog - ANS-Modem
Core size of unmarried mode fiber - ANS-8-10.Five micrometers
Demarcation factor - ANS-Orange cable
Described in phrases of MHz-km - ANS-Modal Bandwidth
For a retrofit task, the installer have to plan to confirm the prevailing shape in opposition to any
documents received before engaging in a pull because...
A. The recabling efforts may be the use of cables already set up, which could defeat the motive
of recabling.
B. The structure of the building won't allow for cutovers
C. That could be a common-sense movement supported by industry best practices
D. The existing files won't reflect actions, provides, and changes that came about after the
preliminary construction - ANS-The present documents might not mirror moves, provides, and
adjustments that came about after the initial production.
For the purposes of dealing with cables that expand from system inside racks, racks ought to be
established so that the cable runs via the ________ of the rack.
_____ is not identified for new creation and should handiest be used when expanding an
present network of this type.
OS1, OM3, OM2, OM4, OM1 - ANS-OS1
_____ is the standard that covers the shade coding of optical fiber cables.
TIA, 568A, 568B, 598C, article 770 - ANS-TIA-598-C
______ is often used for lengthy-haul transmission structures, information systems requiring
high bandwidth, and lots of optical fiber based totally video distribution systems.
OM4, OM3, OM1, OS1, OM2 - ANS-OS1
______ is not encouraged for new installations.
OS1, OM1, OM2, OM4, OM3 - ANS-OM2
______ can be used for distances as much as 3000m for SCS.
OM1, OS1, OM4, OM3, OM2 - ANS-OS1
Ability of an digital aspect to keep electric energy.
Opposition to a exchange in voltage. - ANS-Capacitance
After you have repaired the problem determined whilst checking out the device, what is the
NEXT step inside the troubleshooting technique?
A. Test the machine
B. Isolate the supply
C. Repair the hassle
D. Document the modifications - ANS-Document the adjustments
All bonding conductors shall hold a minimal bending radius of ______in.
10, 2, 4, 8 - ANS-8 inches
An increase of _____ will bring about a doubling or having of the strength.
6 dB, 4 dB, 1 dB, 3 dB - ANS-three dB
Basic unit of virtual transmission is a ....
Bit, modem, codec, byte - ANS-Bit
Cable system three, first-degree spine - ANS-White cable
Cabling machine 1, horizontal cable - ANS-Blue cable
, Cabling device 2, 2d-degree backbone - ANS-Gray cable
Cat three frequency - ANS-sixteen MHZ Class C
Cat 5e frequency - ANS-a hundred MHz Class D
Cat 6 frequency - ANS-250 MHz Class E
Cat 6e frequency - ANS-500 MHz Class Ea
Cat 7 frequency - ANS-600 MHz
Cat 7a frequency - ANS-one thousand MHz
Cat eight frequency - ANS-2000 MHz
Cat 8.2 frequency - ANS-2000 MHz
Common equipment - ANS-Purple cable
Converts digital to analog - ANS-Modem
Core size of unmarried mode fiber - ANS-8-10.Five micrometers
Demarcation factor - ANS-Orange cable
Described in phrases of MHz-km - ANS-Modal Bandwidth
For a retrofit task, the installer have to plan to confirm the prevailing shape in opposition to any
documents received before engaging in a pull because...
A. The recabling efforts may be the use of cables already set up, which could defeat the motive
of recabling.
B. The structure of the building won't allow for cutovers
C. That could be a common-sense movement supported by industry best practices
D. The existing files won't reflect actions, provides, and changes that came about after the
preliminary construction - ANS-The present documents might not mirror moves, provides, and
adjustments that came about after the initial production.
For the purposes of dealing with cables that expand from system inside racks, racks ought to be
established so that the cable runs via the ________ of the rack.
