1
DANTE LEVEL 1-3 EXAM 2025 | ALL QUESTIONS AND
CORRECT ANSWERS | GRADED A+ | VERIFIED
ANSWERS | LATEST VERSION | JUST RELEASED
Dante audio streams over WiFi networks [are _______________________]. -
..(ANSWER)...not supported
The bit depth of an audio system dictates - ..(ANSWER)...The amplitude resolution
of each sample
Does Dante support MIDI - ..(ANSWER)...No. Dante only transports audio data and
does not interfere with MIDI.
Is there any advantage to using automatic IP addressing on a Dante network -
..(ANSWER)...Yes. Automatic addressing ensures that devices create a working
LAN.
How are device names used in Dante - ..(ANSWER)...Subscriptions are made from
name to name
Dante works best with [______________] switches - ..(ANSWER)...gigabit
On a Dante network, latency is - ..(ANSWER)...deterministic, set per device
As sample rate is increased on a device, what other property is usually changed -
..(ANSWER)...Channel count is reduced
, 2
Where do Dante settings reside? - ..(ANSWER)...On individual Dante devices
In the Dante Controller Routing tab, a green check mark indicates -
..(ANSWER)...Subscription successful
Which of the following are diagnostic features of Dante Controller? (check all that
apply) - ..(ANSWER)...1. Latency monitoring
2. Clock monitoring
How does Dante interact with Energy Efficient Ethernet (EEE) switches? -
..(ANSWER)...EEE switches are not recommended for use with Dante
When should fiber be used for an Ethernet connection? - ..(ANSWER)...When runs
over 100 meters are required.
The easiest way to get IP addresses for a functional stand-alone Dante network is
for all devices and computers to - ..(ANSWER)...Use the "obtain an IP Address
Automatically" setting
If a network is only used for Dante and has only one network switch, then -
..(ANSWER)...The network does not require a managed switch
, 3
Does Dante require special network cabling? - ..(ANSWER)...Regular CAT5E or
CAT6 Ethernet cable is recommended
How are devices added to a Dante network - ..(ANSWER)...Devices are
automatically discovered and displayed in Dante Controller
Dante uses [_________________________] switches. - ..(ANSWER)...standard
How are devices restored to a Dante network after power cycle -
..(ANSWER)...Devices and connections are automatically restored
What does the Dante Clock Master do - ..(ANSWER)...Provides synchronization for
all Dante devices on the network
Does a Dante network require special configuration for clocking -
..(ANSWER)...No. A Clock Master is always automatically elected by Dante
A[______________] network topology is a best practice for Dante. -
..(ANSWER)...star
What is latency - ..(ANSWER)...Latency is the audio signal delay in any audio
system.
DANTE LEVEL 1-3 EXAM 2025 | ALL QUESTIONS AND
CORRECT ANSWERS | GRADED A+ | VERIFIED
ANSWERS | LATEST VERSION | JUST RELEASED
Dante audio streams over WiFi networks [are _______________________]. -
..(ANSWER)...not supported
The bit depth of an audio system dictates - ..(ANSWER)...The amplitude resolution
of each sample
Does Dante support MIDI - ..(ANSWER)...No. Dante only transports audio data and
does not interfere with MIDI.
Is there any advantage to using automatic IP addressing on a Dante network -
..(ANSWER)...Yes. Automatic addressing ensures that devices create a working
LAN.
How are device names used in Dante - ..(ANSWER)...Subscriptions are made from
name to name
Dante works best with [______________] switches - ..(ANSWER)...gigabit
On a Dante network, latency is - ..(ANSWER)...deterministic, set per device
As sample rate is increased on a device, what other property is usually changed -
..(ANSWER)...Channel count is reduced
, 2
Where do Dante settings reside? - ..(ANSWER)...On individual Dante devices
In the Dante Controller Routing tab, a green check mark indicates -
..(ANSWER)...Subscription successful
Which of the following are diagnostic features of Dante Controller? (check all that
apply) - ..(ANSWER)...1. Latency monitoring
2. Clock monitoring
How does Dante interact with Energy Efficient Ethernet (EEE) switches? -
..(ANSWER)...EEE switches are not recommended for use with Dante
When should fiber be used for an Ethernet connection? - ..(ANSWER)...When runs
over 100 meters are required.
The easiest way to get IP addresses for a functional stand-alone Dante network is
for all devices and computers to - ..(ANSWER)...Use the "obtain an IP Address
Automatically" setting
If a network is only used for Dante and has only one network switch, then -
..(ANSWER)...The network does not require a managed switch
, 3
Does Dante require special network cabling? - ..(ANSWER)...Regular CAT5E or
CAT6 Ethernet cable is recommended
How are devices added to a Dante network - ..(ANSWER)...Devices are
automatically discovered and displayed in Dante Controller
Dante uses [_________________________] switches. - ..(ANSWER)...standard
How are devices restored to a Dante network after power cycle -
..(ANSWER)...Devices and connections are automatically restored
What does the Dante Clock Master do - ..(ANSWER)...Provides synchronization for
all Dante devices on the network
Does a Dante network require special configuration for clocking -
..(ANSWER)...No. A Clock Master is always automatically elected by Dante
A[______________] network topology is a best practice for Dante. -
..(ANSWER)...star
What is latency - ..(ANSWER)...Latency is the audio signal delay in any audio
system.
