solutions.
SWE MK with 61 correct complete
solutions.
What components shut off the fuel solenoid on a Honda 225? - ANSWER Crankshaft Position (CKP)
sensor, Camshaft Position (CMP) (TDC) sensors 1/2, Manifold Absolute Pressure (MAP) sensor, Engine
Temperature sensor
Less than 1/16 tire tread on a TANB trailer is a (BLANK) discrepancy. - ANSWER Restrictive
What is the length of time you load test a new weight handling equipment? - ANSWER A "Static Load
Test" 200% Working Load Limit (WLL) No less than 10mins
What is the length of time you load test weight handling equipment brakes? - ANSWER A "Modified
Static Test/Brake Test" 150% Working Load Limit (WLL) No less than 10mins
What is the Amperage of a 120V system with 100 ohms? - ANSWER 1.2amps (Amps = Volts/ohms)
What is the Voltage of a system with 12amp and 100 ohms? - ANSWER 1200V (Volt = Amps * ohms)
How long are you required to keep a micro inventory on record? - ANSWER 3 fiscal years plus the
current fiscal year
What is the minimum number of people required for a count team? - ANSWER 2 people
The (BLANK) has access to the inventory records but does not have access to the storeroom/warehouse
during the count. - ANSWER Research/Adjustment Analyst
What happens to the physical size of wire when the gauge (American Wire Gauge, AWG) goes up? -
ANSWER Size goes DOWN as AWG goes UP
, SWE MK with 61 correct complete
solutions.
What is the Flash Point of D-2 Diesel F-76? - ANSWER 140 degrees F
What is the testing interval for testing jacket water? - ANSWER At least monthly
What stores energy that has a coil and a magnetic field? - ANSWER Inductor
An inductor, also called a coil, choke or reactor, is a passive two-terminal electrical component which
resists changes in electric current passing through it.
What is the cool down time required for the P-100 pump? - ANSWER 2 Mins
What is the P-100 operating pressure at 20ft lift? - ANSWER The pump is designed to provide 100gpm at
83psi while lifting 20ft
For convenience the P-100 has "how many" dipsticks? - ANSWER 2
What is the max lift of the P-100 pump? - ANSWER The pump will deliver 68gpm at 45psi while lifting
39ft
When measuring a water cooled stave bearing how far do you insert the feeler gauge? - ANSWER 4-6
inches
A stave bearing is a simple journal bearing where a shaft rotates in a bearing housing. A large housing is
made with grooves running along the shaft, these grooves being filled with strips of suitable material,
originally wood.
What components control air flow at idle to maintain smooth idle speed on a Honda 225? - ANSWER Idle
Air Control Valve (IAC Valve)
An idle air control actuator or idle air control valve (IAC actuator/valve) is a device commonly used in
fuel-injected vehicles to control the engine's idling RPM. In carburetted vehicles a similar device known
as an idle speed control actuator is used.