NTN FireTEAM Study Set Latest 2025 Actual
questions and answers
What do you use to tighten a bolt - ANS-socket wrench
What shape is a drillbit used for metal - ANS-sleek shape, not pointed, no pertruding
edges for operations at high speed to go through hard metal or sometimes wood
what shape drillbit is hand operated for drilling wood - ANS-the tip is a threaded point,
pertruding edges to cut through soft wood.
what shape drillbit is used from ceramics/masonry - ANS-squared off tip bit
small gear vs big gear, what turns faster? - ANS-Big gear
When installing Bolt w/ washer and nut, what side faces you? - ANS-Threaded end
goes away from body to prevent hazard
What tool is used to cut bolts? - ANS-Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do you do if there is unmelted material? - ANS-Stop,
call mechanic
Mechanical Brick Factory: If you want more material from the start of the assembly,
what do you do? - ANS-Adjust amount released by Hopper, DONT adjust speed of belt
Mechanical Brick Factory: If the first grinder is stuck, what do you suspect? - ANS-There
is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - ANS-You put it in reverse
manually
Mechanical Brick Factory: How do you remove a molding station arm? - ANS-1. Loosen
middle nut
2. then remove end nut
Mechanical Brick Factory: If water is pouring over the edge, what do you suspect is
wrong? - ANS-Green Filter CLOG
Mechanical Brick Factory: Water tank is rising quickly, how do you fix it? - ANS-Reduce
amount of fresh water
Mechanical Brick Factory: What purpose does the shake motion have on the washing
tray? - ANS-Shaking spins material to ensure all sides of material get washed
questions and answers
What do you use to tighten a bolt - ANS-socket wrench
What shape is a drillbit used for metal - ANS-sleek shape, not pointed, no pertruding
edges for operations at high speed to go through hard metal or sometimes wood
what shape drillbit is hand operated for drilling wood - ANS-the tip is a threaded point,
pertruding edges to cut through soft wood.
what shape drillbit is used from ceramics/masonry - ANS-squared off tip bit
small gear vs big gear, what turns faster? - ANS-Big gear
When installing Bolt w/ washer and nut, what side faces you? - ANS-Threaded end
goes away from body to prevent hazard
What tool is used to cut bolts? - ANS-Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do you do if there is unmelted material? - ANS-Stop,
call mechanic
Mechanical Brick Factory: If you want more material from the start of the assembly,
what do you do? - ANS-Adjust amount released by Hopper, DONT adjust speed of belt
Mechanical Brick Factory: If the first grinder is stuck, what do you suspect? - ANS-There
is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - ANS-You put it in reverse
manually
Mechanical Brick Factory: How do you remove a molding station arm? - ANS-1. Loosen
middle nut
2. then remove end nut
Mechanical Brick Factory: If water is pouring over the edge, what do you suspect is
wrong? - ANS-Green Filter CLOG
Mechanical Brick Factory: Water tank is rising quickly, how do you fix it? - ANS-Reduce
amount of fresh water
Mechanical Brick Factory: What purpose does the shake motion have on the washing
tray? - ANS-Shaking spins material to ensure all sides of material get washed
