5/6/25, 5:36 PM IFSTA MIDTERM
IFSTA TEST BANK MIDTERM EXAM NEWEST VERSION WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS \\ACTUAL EXAM WITH
VERIFIED ANSWERS ASSURED PASS GRADED A+ \\BRAND NEW
In order to avoid contact A. Follow rehabilitation protocols and allow clothing to cool.
burns and heat stress after
leaving a heated
environment, firefighters
should:
A. Follow rehabilitation
protocols and allow
clothing to cool.
B. Place contaminated PPE
in the cab of the
apparatus.
C. Make sure that the
protective trousers and
coat do not overlap.
D. Thoroughly inspect PPE
to check for damage.
During structural fire fighting C. The SCBA facepiece.
operations, primary eye
protection is provided by:
A. The protective hood.
B. Safety glasses.
C. The SCBA facepiece.
D. Helmet-mounted faceshield.
/ 1/21
,5/6/25, 5:36 PM IFSTA MIDTERM
Which component of the A. Retroflective trim
protective coat is designed
to make firefighters more
visible at night or in low
light conditions?
A. Retroflective trim
B. Collar
C. Drag Rescue Device
D. Wristlets
Protective trousers designed B. constructed from the same fabric, moisture barrier,
for fire fighting are: and thermal layering used in protective coats.
A. required to be sent to the
manufacturer for
specialized cleaning after
each use.
B. constructed from the same
fabric,
moisture barrier, and
thermal layering used in
protective coats.
C. identical to those used in
wildland fire fighting and
roadway operations.
D. designed to protect
firefighters from
extreme fire behavior such
as flashover and rollover.
Fire fighting boots must be: B. high enough to protect the lower leg.
A. made completely of
reinforced leather.
B. high enough to protect the
lower leg.
C. low enough to expose the
ankles.
D. made completely of high-
grade rubber.
/ 2/21
, 5/6/25, 5:36 PM IFSTA MIDTERM
Which is a safety D. Always wear protective clothing that fits properly.
consideration related to
PPE?
A. Make sure there is no
overlap between the coat
and trousers.
B. Never share PPE with
another firefighter.
C. Always wear the
protective gloves
beneath the coat
wristlets.
D. Always wear protective
clothing that fits properly.
PPE must be properly cleaned A. can ignite when exposed to fire.
because
chemicals, oils, and
petroleum products on the
outer shell:
A. can ignite when exposed to
fire.
B. will void the manufacturer's
warranty.
C. may stain the protective
outer layer.
D. will instantly soak
through to the inner
layers.
What should you do if you D. Report the needed repairs to your supervisor.
determine that your PPE
requires advanced
repairs?
A. Repair the PPE yourself
and report it to the
supervisor.
B. Throw the PPE away and
order a new set.
/ 3/21
IFSTA TEST BANK MIDTERM EXAM NEWEST VERSION WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS \\ACTUAL EXAM WITH
VERIFIED ANSWERS ASSURED PASS GRADED A+ \\BRAND NEW
In order to avoid contact A. Follow rehabilitation protocols and allow clothing to cool.
burns and heat stress after
leaving a heated
environment, firefighters
should:
A. Follow rehabilitation
protocols and allow
clothing to cool.
B. Place contaminated PPE
in the cab of the
apparatus.
C. Make sure that the
protective trousers and
coat do not overlap.
D. Thoroughly inspect PPE
to check for damage.
During structural fire fighting C. The SCBA facepiece.
operations, primary eye
protection is provided by:
A. The protective hood.
B. Safety glasses.
C. The SCBA facepiece.
D. Helmet-mounted faceshield.
/ 1/21
,5/6/25, 5:36 PM IFSTA MIDTERM
Which component of the A. Retroflective trim
protective coat is designed
to make firefighters more
visible at night or in low
light conditions?
A. Retroflective trim
B. Collar
C. Drag Rescue Device
D. Wristlets
Protective trousers designed B. constructed from the same fabric, moisture barrier,
for fire fighting are: and thermal layering used in protective coats.
A. required to be sent to the
manufacturer for
specialized cleaning after
each use.
B. constructed from the same
fabric,
moisture barrier, and
thermal layering used in
protective coats.
C. identical to those used in
wildland fire fighting and
roadway operations.
D. designed to protect
firefighters from
extreme fire behavior such
as flashover and rollover.
Fire fighting boots must be: B. high enough to protect the lower leg.
A. made completely of
reinforced leather.
B. high enough to protect the
lower leg.
C. low enough to expose the
ankles.
D. made completely of high-
grade rubber.
/ 2/21
, 5/6/25, 5:36 PM IFSTA MIDTERM
Which is a safety D. Always wear protective clothing that fits properly.
consideration related to
PPE?
A. Make sure there is no
overlap between the coat
and trousers.
B. Never share PPE with
another firefighter.
C. Always wear the
protective gloves
beneath the coat
wristlets.
D. Always wear protective
clothing that fits properly.
PPE must be properly cleaned A. can ignite when exposed to fire.
because
chemicals, oils, and
petroleum products on the
outer shell:
A. can ignite when exposed to
fire.
B. will void the manufacturer's
warranty.
C. may stain the protective
outer layer.
D. will instantly soak
through to the inner
layers.
What should you do if you D. Report the needed repairs to your supervisor.
determine that your PPE
requires advanced
repairs?
A. Repair the PPE yourself
and report it to the
supervisor.
B. Throw the PPE away and
order a new set.
/ 3/21
