CIP Level 1-Nace Exam 4 Questions
With 100% Verified Correct Answers.
Acrylic
A plastic resin that, when mixed with water and pigment, forms an inorganic and quick-drying
paint medium.
-Excellent UV and weather resistance
Polyaspartic
-Used to achieve low or near zero VOC systems
-pot lives from 5 minutes to several hours
-Film builds up to (15 mils) DFT in a single pass
Phenolic
Typically used where low PH environments and Higher Temperature are factors
latex (Emulsions)
-Resins normally thermoplastic resin types
-Coalescence curing
(Non-convertible)
Furans
-Applied by Brick layers not coating applicators.
-Not a common coating type
epoxy
-Two parts, resin and hardener must be mixed.
-Can be solvent-based, water-based, or solvent-free
Alkyds
-Oxidative curing
-Reffered to as "Oil Based Paints"
,Polyurethane
Two major types:
-Alphatic
-Aromatic
(Main Hazard is isocyanate component) cancer causing
Polysiloxane
-Used in services with abrasion, chemicals, extreme UV and high temperature
Chlorinated Rubber
-Evaporative curing
-Contains large amounts of VOC
-Excellent resistance to water, sunlight and many chemicals
Vinyls
, Banned from use in most countries sure to High VOC
Isocyanates
Exclusively to polyurethane
(Cancer causing)
Corrosion Cell
Contains the
Anode,
Cathode,
Metallic Pathway(Return Path),
Electrolytes
corrosion
the deterioration of a metal due to a chemical reaction in the environment
Anode
the electrode at which oxidation occurs
Cathode
the electrode at which reduction occurs
Electrolyte
A medium that conducts ionic current.
Commonly used for steel structure
Epoxy
Sling psychrometer
wet and dry thermometers that measures relative humidity (requires a chart)
Relative Humidity (RH)
With 100% Verified Correct Answers.
Acrylic
A plastic resin that, when mixed with water and pigment, forms an inorganic and quick-drying
paint medium.
-Excellent UV and weather resistance
Polyaspartic
-Used to achieve low or near zero VOC systems
-pot lives from 5 minutes to several hours
-Film builds up to (15 mils) DFT in a single pass
Phenolic
Typically used where low PH environments and Higher Temperature are factors
latex (Emulsions)
-Resins normally thermoplastic resin types
-Coalescence curing
(Non-convertible)
Furans
-Applied by Brick layers not coating applicators.
-Not a common coating type
epoxy
-Two parts, resin and hardener must be mixed.
-Can be solvent-based, water-based, or solvent-free
Alkyds
-Oxidative curing
-Reffered to as "Oil Based Paints"
,Polyurethane
Two major types:
-Alphatic
-Aromatic
(Main Hazard is isocyanate component) cancer causing
Polysiloxane
-Used in services with abrasion, chemicals, extreme UV and high temperature
Chlorinated Rubber
-Evaporative curing
-Contains large amounts of VOC
-Excellent resistance to water, sunlight and many chemicals
Vinyls
, Banned from use in most countries sure to High VOC
Isocyanates
Exclusively to polyurethane
(Cancer causing)
Corrosion Cell
Contains the
Anode,
Cathode,
Metallic Pathway(Return Path),
Electrolytes
corrosion
the deterioration of a metal due to a chemical reaction in the environment
Anode
the electrode at which oxidation occurs
Cathode
the electrode at which reduction occurs
Electrolyte
A medium that conducts ionic current.
Commonly used for steel structure
Epoxy
Sling psychrometer
wet and dry thermometers that measures relative humidity (requires a chart)
Relative Humidity (RH)
