CIP Level 1 Exam 5 Questions With
100% Verified Correct Answers.
Select the environments that are most susceptible to corrosion (select all that apply)
A) Marine Environment
B) Chemical with High Humidity Environment
C) Rural Environment
D) Chemical with Low Humidity Environment
A) Marine
B) Chemical with High Humidity
How do electrons that are produced in the oxidation reaction flow?
A) Cathode to Anode through metallic path.
B) Anode to Cathode through metallic path.
C) Cathode to Anode through electrolyte.
D) Anode to Cathode through electrolyte.
B) Anode to Cathode through metallic path
Match the terms to their definitions: Bonds Pigments together and adhere to surface
A) Binder
B) Solvent
C) Pigments
D) Additives
E) Vehicle
A) Binder
Match the terms to their definitions: Liquid that dissolves solid resins
A) Binder
,B) Solvent
C) Pigments
D) Additives
E) Vehicle
B) Solvent
Match the terms to their definitions: Hides the substrate, provides color, enhances desired
properties.
A) Binder
B) Solvent
C) Pigments
D) Additives
E) Vehicle
C) Pigment
Match the terms to their definitions: Special purpose ingredients used to enhance
performance.
A) Binder
B) Solvent
C) Pigments
D) Additives
E) Vehicle
D) Additives
Match the terms to their definitions: Liquid portion of the coating
A) Binder
B) Solvent
C) Pigments
D) Additives
E) Vehicle
E) Vehicle
, What is the primary role of the coating inspector?
A) Safety Enforcement
B) Specification Compliance
C) Failure Investigation
D) Quality Control
B) Specification Compliance
What should you do if you find discrepancies between the spec and the
manufacturer's product data sheet (PDS)?
Seek clarification from the owners representative during the pre-job conference.
Which of the following are a coating inspectors' responsibilities (Select all that apply)
A) Advise coating applicators on how to improve their work.
B) Ensure you have the required inspection equipment for the project.
C) Obtain, read, and understand the project's specs.
D) Document and report results.
E) Clarify any ambiguities regarding their role.
B) Ensure you have the required inspection equipment for the project.
C) Obtain, read, and understand the project's specs.
D) Document and report results.
E) Clarify any ambiguities regarding their role.
According to CIP attestation, when is it ok for a QA inspector to accept a gift from
a contractor?
Never
Inspection Reports typically provide sufficient detail permitting the owner to
evaluate which of the following (select all that apply)
A) Contractors performance
B) Inspectors performance
C) Job Progress
D) Work Interruptions
100% Verified Correct Answers.
Select the environments that are most susceptible to corrosion (select all that apply)
A) Marine Environment
B) Chemical with High Humidity Environment
C) Rural Environment
D) Chemical with Low Humidity Environment
A) Marine
B) Chemical with High Humidity
How do electrons that are produced in the oxidation reaction flow?
A) Cathode to Anode through metallic path.
B) Anode to Cathode through metallic path.
C) Cathode to Anode through electrolyte.
D) Anode to Cathode through electrolyte.
B) Anode to Cathode through metallic path
Match the terms to their definitions: Bonds Pigments together and adhere to surface
A) Binder
B) Solvent
C) Pigments
D) Additives
E) Vehicle
A) Binder
Match the terms to their definitions: Liquid that dissolves solid resins
A) Binder
,B) Solvent
C) Pigments
D) Additives
E) Vehicle
B) Solvent
Match the terms to their definitions: Hides the substrate, provides color, enhances desired
properties.
A) Binder
B) Solvent
C) Pigments
D) Additives
E) Vehicle
C) Pigment
Match the terms to their definitions: Special purpose ingredients used to enhance
performance.
A) Binder
B) Solvent
C) Pigments
D) Additives
E) Vehicle
D) Additives
Match the terms to their definitions: Liquid portion of the coating
A) Binder
B) Solvent
C) Pigments
D) Additives
E) Vehicle
E) Vehicle
, What is the primary role of the coating inspector?
A) Safety Enforcement
B) Specification Compliance
C) Failure Investigation
D) Quality Control
B) Specification Compliance
What should you do if you find discrepancies between the spec and the
manufacturer's product data sheet (PDS)?
Seek clarification from the owners representative during the pre-job conference.
Which of the following are a coating inspectors' responsibilities (Select all that apply)
A) Advise coating applicators on how to improve their work.
B) Ensure you have the required inspection equipment for the project.
C) Obtain, read, and understand the project's specs.
D) Document and report results.
E) Clarify any ambiguities regarding their role.
B) Ensure you have the required inspection equipment for the project.
C) Obtain, read, and understand the project's specs.
D) Document and report results.
E) Clarify any ambiguities regarding their role.
According to CIP attestation, when is it ok for a QA inspector to accept a gift from
a contractor?
Never
Inspection Reports typically provide sufficient detail permitting the owner to
evaluate which of the following (select all that apply)
A) Contractors performance
B) Inspectors performance
C) Job Progress
D) Work Interruptions
