Answers Latest Version Graded A+
/. Speed limits for trucks will differ based on - Answer-(1) commercial vehicle
designation,(2) weight restrictions, and (3) type of road being traveled
/.When approaching a downhill grade in a truck, it is a good idea to - Answer-shift to a
lower gear before starting down the hill. Otherwise you may need to use the brakes too
much, causing overheating and possible loss of braking power
/.To maintain the best control on a curve - Answer-slow to a safe speed before entering
the curve, then accelerate slightly through it.
/.Braking in a curve is dangerous because - Answer-you may lock the wheels and cause
a skid
/.Following vehicles too closely is dangerous and, depending on the size of your vehicle,
it may be - Answer-illegal
/.According to Michigan law, outside the corporate limits of a city or village, vehicles with
gross weights over ______________________________ must not follow each other
closer than _________ feet except ______________ - Answer-5000 pounds, 500 feet,
when passing
/.To provide time to react to changes in traffic, you should look ahead ____________
worth of travel time - Answer-12 seconds
/.If a load extends more than ______ feet or more past the rear of the vehicle's bed or
body, a ____________ at least _________ square __________ during the day, or a
__________ at night must be displayed at the extreme rear end of the load - Answer-4
feet, red flag at least 12 inches, or a red light at night
/.The maximum height allowed for vehicles on Michigan roads and highways is
_____________ - Answer-13 feet 6 inches
/.Commercial vehicles with a capacity of ______must have _______ - Answer-1000
pounds or more must have one outside rearview mirror on each side of the vehicle.
/.To offset the problem of blind spots in rear view mirrors - Answer-turn your head to
check what the mirrors to not show
/.If you park a disabled vehicle on the shoulder of a road - Answer-warning devices
must be set out