MK1 SWE Complete Latest Actual Exam
set with Questions and correct/verified
Answers
what are two types of maintenance - ANSWER-Corrective and preventative
What article always captain to conduct NJP - ANSWER-Article 15
Where two types of procedures that may be accessed from maintenance procedure option - ANSWER-
Official and local
Who is authorized to conduct tag outs - ANSWER-Authorizing officer
Out of calibration tags should be used when - ANSWER-When indicating parameter errors are small and
consistent
For modernized units the boat inspection reports are to be entered through - ANSWER-Almis/ EALpage
Cutter engineering report shall be completed in accordance with - ANSWER-Naval engineering manual
chapter 90
On an MPC the warning shall come where in the text - ANSWER-Before the instruction
On an MPC what would constitute an expendable - ANSWER-Rags
PMS that does not need to be included in the cutter engineering report is - ANSWER-Daily and weekly
With regards to casreps what is mandatory on all updates corrects and cancellations - ANSWER-REF
Which unit besides a shore unit are exempt from filling out the POSIT line - ANSWER-Cutter underway
A casrep it should be made as soon as possible no later than ____hours - ANSWER-24
Casualties that effect a secondary mission should always have a casualty category of - ANSWER-2
AMPN is mandatory after any set that contains an entry of? - ANSWER-Other, tech, none
In a 1PARTSID if the NIIN is not known what needs to be put in the line - ANSWER-Unknown
What is the criteria for submitting CASCOR - ANSWER-The delay expressed an hours, and correcting the
casualty due to parts unavailability, a list of all parts requested and dates received; the total number of
man-hours expanded; the number of equipment hours since last failure
You find something else wrong with the piece of equipment that has already been CASREP'd you should
send an? - ANSWER-Update
Where do you find the hierarchy of guidance for specification plans - ANSWER-NEM chapter 41
Which specifications may be used as a guided researching propose engineering changes and solutions -
ANSWER-GSO
Which specification do not apply to construction, alteration or maintenance of Coast Guard cutters -
ANSWER-Commercial general specifications for t-ships
Where do you find the authorized material list for deck coverings - ANSWER-Naval engineering manual
chapter 634
110 - WPB - 521-01, what does 5 21 represent - ANSWER-SW BS number
Enthusiasm for realistic drills must outweigh sound judgment, or sound evaluation of the______ -
ANSWER-State of the crew
, Casualty control is used for what type of casualties - ANSWER-Operational and battle
How do you connect the battery in parallel - ANSWER-Positive to positive negative to negative
How do you hook up an ammeter - ANSWER-In series
What do you clean a battery terminal with - ANSWER-Sodium bicarbonate\ammonia
If a CAN and buss has 120 ohms resistors at each and what is the total resistance on a good CAM buss -
ANSWER-60 ohms
As wire sizes increase what happens to resistance and amperage - ANSWER-Resistance goes down and
Amperage increase
Is a DIN what is represented by the letter K - ANSWER-Relay
Is a DIN what is represented by the letter F - ANSWER-Fuse/breaker
When charging a battery for the first time the chart should be - ANSWER-Long\low rate
The MPU - 23 card exhibits what color lights on the panel when operating normally - ANSWER-Green
yellow yellow
How would you test a 4-20mA sensor - ANSWER-In mA, in series
When testing p1000 pyrometer meter and you read 0 ohms - ANSWER-The center is good/closed
Installed in all PIM1 and PIM2 cards - ANSWER-MPU23
What does CAN mean in a CAN buss - ANSWER-Controller area network
What is the first thing you should do when the remote operating station for an MTU engine has no lights
and no alarms - ANSWER-Check voltage
How long will a wet cell battery go for off a charger for it needs to be recharged - ANSWER-4 to 6 months
When using a ammeter to troubleshoot always use the____ scale - ANSWER-Highest
With the float charge the charger monitors what - ANSWER-Voltage
In a wet cell battery what should the electrolyte level be - ANSWER-3/8
In a gel cell battery what is the purpose of the separating plates - ANSWER-Separates the positive and
negative cells preventing short circuiting
A WG of a wire is measured by - ANSWER-The bare wire in the opening of the gauge
Amperage of the wire is measured in reference to - ANSWER-10 and 100 foot lengths
The standard for wire Manufacturing is - ANSWER-American wire gauge
The color of the wire is used to determine the _____ of the wire - ANSWER-Size
Conductivity of jacket water shall not exceed - ANSWER-150 mohms /cm
Jacket water is tested - ANSWER-Monthly
How often do you zincs last - ANSWER-Three months
When is a zinc not required - ANSWER-Exclusive freshwater boats
A thrust bearing supports what type of movement - ANSWER-Axial
With regards to flange shielding on the diesel fuel system what is considered a hot surface - ANSWER-
400°
What is a hose shelflife - ANSWER-10 years
Rudder stock is supported by what - ANSWER-Bearing
set with Questions and correct/verified
Answers
what are two types of maintenance - ANSWER-Corrective and preventative
What article always captain to conduct NJP - ANSWER-Article 15
Where two types of procedures that may be accessed from maintenance procedure option - ANSWER-
Official and local
Who is authorized to conduct tag outs - ANSWER-Authorizing officer
Out of calibration tags should be used when - ANSWER-When indicating parameter errors are small and
consistent
For modernized units the boat inspection reports are to be entered through - ANSWER-Almis/ EALpage
Cutter engineering report shall be completed in accordance with - ANSWER-Naval engineering manual
chapter 90
On an MPC the warning shall come where in the text - ANSWER-Before the instruction
On an MPC what would constitute an expendable - ANSWER-Rags
PMS that does not need to be included in the cutter engineering report is - ANSWER-Daily and weekly
With regards to casreps what is mandatory on all updates corrects and cancellations - ANSWER-REF
Which unit besides a shore unit are exempt from filling out the POSIT line - ANSWER-Cutter underway
A casrep it should be made as soon as possible no later than ____hours - ANSWER-24
Casualties that effect a secondary mission should always have a casualty category of - ANSWER-2
AMPN is mandatory after any set that contains an entry of? - ANSWER-Other, tech, none
In a 1PARTSID if the NIIN is not known what needs to be put in the line - ANSWER-Unknown
What is the criteria for submitting CASCOR - ANSWER-The delay expressed an hours, and correcting the
casualty due to parts unavailability, a list of all parts requested and dates received; the total number of
man-hours expanded; the number of equipment hours since last failure
You find something else wrong with the piece of equipment that has already been CASREP'd you should
send an? - ANSWER-Update
Where do you find the hierarchy of guidance for specification plans - ANSWER-NEM chapter 41
Which specifications may be used as a guided researching propose engineering changes and solutions -
ANSWER-GSO
Which specification do not apply to construction, alteration or maintenance of Coast Guard cutters -
ANSWER-Commercial general specifications for t-ships
Where do you find the authorized material list for deck coverings - ANSWER-Naval engineering manual
chapter 634
110 - WPB - 521-01, what does 5 21 represent - ANSWER-SW BS number
Enthusiasm for realistic drills must outweigh sound judgment, or sound evaluation of the______ -
ANSWER-State of the crew
, Casualty control is used for what type of casualties - ANSWER-Operational and battle
How do you connect the battery in parallel - ANSWER-Positive to positive negative to negative
How do you hook up an ammeter - ANSWER-In series
What do you clean a battery terminal with - ANSWER-Sodium bicarbonate\ammonia
If a CAN and buss has 120 ohms resistors at each and what is the total resistance on a good CAM buss -
ANSWER-60 ohms
As wire sizes increase what happens to resistance and amperage - ANSWER-Resistance goes down and
Amperage increase
Is a DIN what is represented by the letter K - ANSWER-Relay
Is a DIN what is represented by the letter F - ANSWER-Fuse/breaker
When charging a battery for the first time the chart should be - ANSWER-Long\low rate
The MPU - 23 card exhibits what color lights on the panel when operating normally - ANSWER-Green
yellow yellow
How would you test a 4-20mA sensor - ANSWER-In mA, in series
When testing p1000 pyrometer meter and you read 0 ohms - ANSWER-The center is good/closed
Installed in all PIM1 and PIM2 cards - ANSWER-MPU23
What does CAN mean in a CAN buss - ANSWER-Controller area network
What is the first thing you should do when the remote operating station for an MTU engine has no lights
and no alarms - ANSWER-Check voltage
How long will a wet cell battery go for off a charger for it needs to be recharged - ANSWER-4 to 6 months
When using a ammeter to troubleshoot always use the____ scale - ANSWER-Highest
With the float charge the charger monitors what - ANSWER-Voltage
In a wet cell battery what should the electrolyte level be - ANSWER-3/8
In a gel cell battery what is the purpose of the separating plates - ANSWER-Separates the positive and
negative cells preventing short circuiting
A WG of a wire is measured by - ANSWER-The bare wire in the opening of the gauge
Amperage of the wire is measured in reference to - ANSWER-10 and 100 foot lengths
The standard for wire Manufacturing is - ANSWER-American wire gauge
The color of the wire is used to determine the _____ of the wire - ANSWER-Size
Conductivity of jacket water shall not exceed - ANSWER-150 mohms /cm
Jacket water is tested - ANSWER-Monthly
How often do you zincs last - ANSWER-Three months
When is a zinc not required - ANSWER-Exclusive freshwater boats
A thrust bearing supports what type of movement - ANSWER-Axial
With regards to flange shielding on the diesel fuel system what is considered a hot surface - ANSWER-
400°
What is a hose shelflife - ANSWER-10 years
Rudder stock is supported by what - ANSWER-Bearing
