Trade Terms Quiz - Questions With Complete
Solutions
The process of joining metal parts using an electric arc is known as
__________. Correct Answer - Arc welding
An equipment or process powered by compressed air is ___________.
Correct Answer - Pneumatic
Wood or metal braces placed diagonally from the bottom of one rail
to the top of another rail in order to provide the support are
referred to as ____________. Correct Answer - Cross brace
When a whole company sees the values of safety it is said to have
a(n) __________. Correct Answer - Safety culture
Material such as soil removed from a trench or excavation is known
as ____________. Correct Answer - Spoil
An area that is enclosed, fenced, covered, or otherwise protected by
barriers, rails. Covers, or platforms to prevent dangerous contact is
said to be ____________. Correct Answer - Guarded
A(n) ____________ is an unintentional, electrically conducting
connection between an ungrounded conductor of an electrical
circuit and the normally noncurrent-carrying conductors. Metal
objects, or the earth. Correct Answer - Ground fault
A(n) _____________ is a device that interrupts and de-energizes an
electrical circuit to protect a person from electrocution. Correct
Answer - GFCI
, The type of equipment that is powered by fluid pressure is
_____________. Correct Answer - Hydraulic
An unplanned event that results in personal injury is referred to as
a(n) _____________. Correct Answer - Accident
A protective screen set up around a welding operation designed to
safeguard workers not directly involved in that operation is a(n)
______________. Correct Answer - Welding curtain
A process using heat in excess of 800°F (427°C) to melt base metal,
along with a filler metal in order to join copper pipe is called
_____________. Correct Answer - Brazing
A material that is capable of easily igniting and rapidly burning with
a flash point at or above 100°F (38°C) is considered ______________.
Correct Answer - Combustible
A structure used to protect workers in trenches, but lacking the
ability to prevent cave-ins is _________________. Correct Answer -
Shielding
A near miss that occurs but does not result in personal injury is
considered to be a(n) ___________. Correct Answer - Incident
The formal procedure for taking equipment out of service and
ensuring it cannot be operated until an authorized person has
returned it to service is _______. Correct Answer -
Lockout/Tagout
A(n) ___________ is any man-made cut, cavity, trench, or depression in
an earth surface, formed by removing earth. Correct Answer -
Excavation
Solutions
The process of joining metal parts using an electric arc is known as
__________. Correct Answer - Arc welding
An equipment or process powered by compressed air is ___________.
Correct Answer - Pneumatic
Wood or metal braces placed diagonally from the bottom of one rail
to the top of another rail in order to provide the support are
referred to as ____________. Correct Answer - Cross brace
When a whole company sees the values of safety it is said to have
a(n) __________. Correct Answer - Safety culture
Material such as soil removed from a trench or excavation is known
as ____________. Correct Answer - Spoil
An area that is enclosed, fenced, covered, or otherwise protected by
barriers, rails. Covers, or platforms to prevent dangerous contact is
said to be ____________. Correct Answer - Guarded
A(n) ____________ is an unintentional, electrically conducting
connection between an ungrounded conductor of an electrical
circuit and the normally noncurrent-carrying conductors. Metal
objects, or the earth. Correct Answer - Ground fault
A(n) _____________ is a device that interrupts and de-energizes an
electrical circuit to protect a person from electrocution. Correct
Answer - GFCI
, The type of equipment that is powered by fluid pressure is
_____________. Correct Answer - Hydraulic
An unplanned event that results in personal injury is referred to as
a(n) _____________. Correct Answer - Accident
A protective screen set up around a welding operation designed to
safeguard workers not directly involved in that operation is a(n)
______________. Correct Answer - Welding curtain
A process using heat in excess of 800°F (427°C) to melt base metal,
along with a filler metal in order to join copper pipe is called
_____________. Correct Answer - Brazing
A material that is capable of easily igniting and rapidly burning with
a flash point at or above 100°F (38°C) is considered ______________.
Correct Answer - Combustible
A structure used to protect workers in trenches, but lacking the
ability to prevent cave-ins is _________________. Correct Answer -
Shielding
A near miss that occurs but does not result in personal injury is
considered to be a(n) ___________. Correct Answer - Incident
The formal procedure for taking equipment out of service and
ensuring it cannot be operated until an authorized person has
returned it to service is _______. Correct Answer -
Lockout/Tagout
A(n) ___________ is any man-made cut, cavity, trench, or depression in
an earth surface, formed by removing earth. Correct Answer -
Excavation
