SACA Certification C-101 study test guide
with comple solution newest review
Function - ANS The three Fs of product design are form, fit and __________.
Lean Manufacturing - ANS High product quality, quick delivery, low costs are the primary
goals of what system?
Standardize - ANS Which 5S step involves formatting 5S work instructions so that they look
and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to
be more successful - ANS How does the 5S method aid in the goal of lean manufacturing?
HMI - ANS What is the interface used with CNC machines to load and monitor programs?
PLC - ANS The automation of many different manufacturing processes is done through the
use of a small computer called a __________.
An error message. - ANS When a machine stops due to an problem, what would the
machine's HMI typically display?
Industry 4.0 - ANS Smart sensors connected to manufacturing networks creates what level of
Industry?
Ethernet - ANS What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them to communicate to one
another?
Predictive maintenance - ANS Which IIoT application monitors equipment during normal
operation to prevent failures to the equipment?
Standards - ANS Occupational Safety and Health Administration(OSHA) develops
__________ for safety retail and service industries to construction and manufacturing.
True - ANS The regulation that requires manufacturers to document and report information
on the types of chemicals they use, store, release into the environment, or dispose of is known
as EPCRA. Is this statement TRUE or FALSE?
Computers - ANS The use of ___________________marked the advent of the third
industrial revolution?
, Notify a supervisor immediately - ANS If an operator knows a safety problem exists with a
machine, the operator should __________.
Emergency stop - ANS A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger.
It is closed - ANS If the energy sources are shut down, what would this mean for a
pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment - ANS What are the 5 steps of electrical Lockout/tagout
Falls - ANS Which of the following is a common cause of workplace death?
Hazard assessment - ANS The process of identifying potential hazards in the workplace is
known as a __________.
TRUE - ANS An injury is defined as physical harm to the body that happens as a result of
exposure to some form of energy that exceeds the body's tolerance. Is this statement TRUE or
FALSE?
Shut down their machines and leave the building - ANS In the event of an evacuation alarm,
employees should __________.
15 - ANS After exposure to most chemicals the eyes should be flushed continuously for
__________ minutes.
Thickeners - ANS Grease is made from a liquid lubricant with what added to it to make it
semi-solid?
Pictograms - ANS What does the GHS hazardous material classification systems use to
identify the danger of a material?
16 - ANS Every Safety Data Sheet must follow the same format that has __________
sections.
SDS - ANS Safe handling procedures of chemicals are found in the __________.
First in, first out - ANS __________ is a system that rotates chemical stock to ensure they
are used within their shelf life.
with comple solution newest review
Function - ANS The three Fs of product design are form, fit and __________.
Lean Manufacturing - ANS High product quality, quick delivery, low costs are the primary
goals of what system?
Standardize - ANS Which 5S step involves formatting 5S work instructions so that they look
and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to
be more successful - ANS How does the 5S method aid in the goal of lean manufacturing?
HMI - ANS What is the interface used with CNC machines to load and monitor programs?
PLC - ANS The automation of many different manufacturing processes is done through the
use of a small computer called a __________.
An error message. - ANS When a machine stops due to an problem, what would the
machine's HMI typically display?
Industry 4.0 - ANS Smart sensors connected to manufacturing networks creates what level of
Industry?
Ethernet - ANS What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them to communicate to one
another?
Predictive maintenance - ANS Which IIoT application monitors equipment during normal
operation to prevent failures to the equipment?
Standards - ANS Occupational Safety and Health Administration(OSHA) develops
__________ for safety retail and service industries to construction and manufacturing.
True - ANS The regulation that requires manufacturers to document and report information
on the types of chemicals they use, store, release into the environment, or dispose of is known
as EPCRA. Is this statement TRUE or FALSE?
Computers - ANS The use of ___________________marked the advent of the third
industrial revolution?
, Notify a supervisor immediately - ANS If an operator knows a safety problem exists with a
machine, the operator should __________.
Emergency stop - ANS A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger.
It is closed - ANS If the energy sources are shut down, what would this mean for a
pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment - ANS What are the 5 steps of electrical Lockout/tagout
Falls - ANS Which of the following is a common cause of workplace death?
Hazard assessment - ANS The process of identifying potential hazards in the workplace is
known as a __________.
TRUE - ANS An injury is defined as physical harm to the body that happens as a result of
exposure to some form of energy that exceeds the body's tolerance. Is this statement TRUE or
FALSE?
Shut down their machines and leave the building - ANS In the event of an evacuation alarm,
employees should __________.
15 - ANS After exposure to most chemicals the eyes should be flushed continuously for
__________ minutes.
Thickeners - ANS Grease is made from a liquid lubricant with what added to it to make it
semi-solid?
Pictograms - ANS What does the GHS hazardous material classification systems use to
identify the danger of a material?
16 - ANS Every Safety Data Sheet must follow the same format that has __________
sections.
SDS - ANS Safe handling procedures of chemicals are found in the __________.
First in, first out - ANS __________ is a system that rotates chemical stock to ensure they
are used within their shelf life.
