BICSI - Installer 1 - Review
1. A third 90-degree bend may be permitted in a conduit B
run if the run does NOT exceed ______?
A 5 m (16.5')
B 10 m (33')
C 15 m (50')
D 30 m (100')
2. Which of the following is a property of an electromag- C
netic field built around a conductor that opposes any
changes in current flow in a circuit?
A Impedance
B Capacitance
C Inductance
D Resistance
3. Which of the following markings is used for non-con- A
ductive optical fiber general-purpose cables?
A OFNG
B OFCR
C OFCP
D OFNP
4. Which of the following refers to a set of rules issued A
by a governmental body at the state level within the
US?
, BICSI - Installer 1 - Review
A Regulations
B Best Practices
C Applications
D Guidelines
5. What is the specified performance level for Category B
6 cable?
A 100 MHz
B 250 MHz
C 500 MHz
D 600 MHz
6. Which type of optical fiber cable should be color coded A
with an Orange outer cable sheath?
A MM with a 100 um core diameter
B Dispersion-shifted SM optical fiber
C Polarization maintain SM optical fiber
D SM optical fiber
7. Which of the following is the primary benefit of using D
wall-mounted racks and cabinets in place of tradition-
al equipment racks?
, BICSI - Installer 1 - Review
A Provides equipment with a higher level of protec-
tion
B Allows for the equipment to be easily rearranged
C Optimizes airflow within the equipment room
D Takes up less space within the equipment room
8. Which topology uses a linear configuration that places C
all network devices on one length of cable?
A Star
B Ring
C Bus
9. Which of the Two organizations jointly oversee the D
worldwide standardization of telecommunications ca-
bling?
A Alliance for Telecommunications Industry Solutions
(ATIS) and Society for Cable Telecommunications En-
gineers (SCTE)
B National Electrical Contractors Association (NECA)
and National Fire Protection Association (NFPA)
C Comite Europeen de Normalisation Electrotech-
nique (CENELEC) and Electronic Industries Association
(EIA)
, BICSI - Installer 1 - Review
D International Organization for Standardization (ISO)
and International Electrotechnical Commission (IEC)
10. Which of the following is designed to provide protec- B
tion from harmful chemicals?
A Cut-resistant gloves
B Rubber gloves
C Leather gloves
11. Which of the following is a building-serving space that B
houses large pieces of common active equipment?
A TR
B ER
C TE
D Mechanical Room
E Battery room
12. Which phase of testing includes documenting the test C
results?
A Phase 1
B Phase 2
C Phase 3
13. A
1. A third 90-degree bend may be permitted in a conduit B
run if the run does NOT exceed ______?
A 5 m (16.5')
B 10 m (33')
C 15 m (50')
D 30 m (100')
2. Which of the following is a property of an electromag- C
netic field built around a conductor that opposes any
changes in current flow in a circuit?
A Impedance
B Capacitance
C Inductance
D Resistance
3. Which of the following markings is used for non-con- A
ductive optical fiber general-purpose cables?
A OFNG
B OFCR
C OFCP
D OFNP
4. Which of the following refers to a set of rules issued A
by a governmental body at the state level within the
US?
, BICSI - Installer 1 - Review
A Regulations
B Best Practices
C Applications
D Guidelines
5. What is the specified performance level for Category B
6 cable?
A 100 MHz
B 250 MHz
C 500 MHz
D 600 MHz
6. Which type of optical fiber cable should be color coded A
with an Orange outer cable sheath?
A MM with a 100 um core diameter
B Dispersion-shifted SM optical fiber
C Polarization maintain SM optical fiber
D SM optical fiber
7. Which of the following is the primary benefit of using D
wall-mounted racks and cabinets in place of tradition-
al equipment racks?
, BICSI - Installer 1 - Review
A Provides equipment with a higher level of protec-
tion
B Allows for the equipment to be easily rearranged
C Optimizes airflow within the equipment room
D Takes up less space within the equipment room
8. Which topology uses a linear configuration that places C
all network devices on one length of cable?
A Star
B Ring
C Bus
9. Which of the Two organizations jointly oversee the D
worldwide standardization of telecommunications ca-
bling?
A Alliance for Telecommunications Industry Solutions
(ATIS) and Society for Cable Telecommunications En-
gineers (SCTE)
B National Electrical Contractors Association (NECA)
and National Fire Protection Association (NFPA)
C Comite Europeen de Normalisation Electrotech-
nique (CENELEC) and Electronic Industries Association
(EIA)
, BICSI - Installer 1 - Review
D International Organization for Standardization (ISO)
and International Electrotechnical Commission (IEC)
10. Which of the following is designed to provide protec- B
tion from harmful chemicals?
A Cut-resistant gloves
B Rubber gloves
C Leather gloves
11. Which of the following is a building-serving space that B
houses large pieces of common active equipment?
A TR
B ER
C TE
D Mechanical Room
E Battery room
12. Which phase of testing includes documenting the test C
results?
A Phase 1
B Phase 2
C Phase 3
13. A
