Answers
Large MS4 System - ANSWERSMunicipal Separate Storm Sewer System. Serve population of
250,000 or more
Meander Width Ratio - ANSWERSbelt width/bankfull width
Not considered water of the united states - ANSWERSprior converted cropland; waste treatment
systems (e.g. treatment ponds/lagoons)
What if a CPSWQ is fraudulent: - ANSWERSRule 2.16
1. advice against decision
2. refuse to consent
3. report decision to authority
NTU - ANSWERSNephelometric Turbidity Unit
What is a measure of turbidity: - ANSWERSAmount of material suspended in water. Increasing
this parameter of water decreases amount of light that penetrates the water column. High
levels are harmful to aquatic life.
Rule 3:12 - ANSWERSECI Professionals shall undertake to perform pro services only when they,
together with those whom they may engage as consultants, are qualified by education, training,
or experience in specific technical areas involved.
,Ethical Standard 3:5 - ANSWERSECI Professionals should employ reasonable safeguards in
systems and practices to protect confidentiality of project materials (both analogue and digital)
5 fundamental principles - ANSWERS1.Intergrity
2.Objectivity
3.Confidentiality
4.Competence
5.Professionalism
Pollutant Concentrations are best used for_______ term impact. - ANSWERSShort term impact
SWPPP - ANSWERSStorm Water Pollution Prevention Plan- plan required by storm water
regulations/permits includes site maps, identification.
NURP - ANSWERSNationwide Urban Runoff Program
1987-1983
led to EPA regulating storm water
Which sediment has most potential for erosion: - ANSWERSSilt
Which SWP used chemical, physical and biological processes: - ANSWERSSaltation- movement
of intermediate size (0.05-0.5 mm) particles that are lifted short distances into the air and then
fall back to dislodge more soil. Accounts for over 50% total soil movment
Rooftop top pollutant of concern: - ANSWERSZinc
Which is a measurement of sediment: - ANSWERSTSS, SSC, SSTS, Turbidity
, Which is a micropollutant: - ANSWERSFloatable debris, total P
Which pollutant adheres to sediment: - ANSWERSTP, oil & Grease
Water Quality Standards purpose: - ANSWERSWell being of survival of man, plants, and wildlife.
TMDL (Total Maximum Daily Load) - ANSWERSCWA Section 303- established by Clean Water Act
to guide application of state water quality standards to individual bodies of water and
watersheds by defining the amount of a particular pollutant a water body can absorb on a daily
basis without violating applicable water quality standards.
Purpose of the Clean Water Act: - ANSWERSFederal Water Pollution Act (1948)- CWA (1972)-
restoring and maintaining chemical, physical, and biological integrity of US waters
At what frequency should a construction be inspected for maximum success: - ANSWERSWeekly
When inspecting a construction what is the first thing which should be considered: -
ANSWERSSafety and Communication
Perk test: - ANSWERSType of measuring conducted by drilling a hole in ground, pouring water
into the hole and observing the rate which the water is absorbed into the soil
Taking a picture--what critical information should be accompanied: - ANSWERS1. Location
2. Time
3. Date
What percentage of a construction site must be stabilized before NOT: - ANSWERS70%