CSX Freight Conductor Test 1QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+||BRAND NEW!!
When crossing tracks with standing cars in the tracks what must the employee do
before crossing? Select all that apply - ans -1) Cross more than 25 feet from the
end of standing cars
2)stop and look both ways
When dismounting from equipment what must you do? Select all that apply
- ans -1) Stop at the bottom step or ladder rung to ensure solid footing before
dismounting.
2) Ensure a safe area to dismount clear of obstructions
When crossing over a piece of equipment utilizing 3 points of contact what must
you not do? - ans -Step on any part of the hand brake, cut lever, angle cock,
coupler, or components of the cushion underframe.
When riding on equipment maintaining 3 points of contact and being prepared
for slack or unexpected movements what else must you do? - ans -Position body
facing the equipment and look direction of travel
Do not ride on equipment unless the equipment is equipped with what? - ans -A
horizontal grab iron at least 12 inches above the floor of the car or at least one
vertical grab iron that allowed the employee to stand upright
True or False: When riding on a locomotive you are allowed to occupy the side
walkways when moving up to 20 miles per hour. - ans -True
What is required if you are approaching a close clearance or close clearance sign
while riding equipment? - ans -Dismount
What is the distance you should stand from a switch or derail associated with the
route of a passing train? - ans -30 feet
, When there is a conflict between authorized train speeds what speed should you
choose to operate? - ans -The Lowest
What are written or electronically transmitted special instructions issued by the
operating rules department concerning the safety of employees and the
movement of trains? - ans -System Bulletin
What is a publication containing instructions and other essential information
relating to the movement of trains or equipment? - ans -Timetable
When must an employee keep their Safeway Rules manual on them? - ans -When
on Duty
When there is an uncertainty regarding the rules when it comes to a situation
what must the employee do? - ans -Take the safe course
If you are not using remote control equipment, what speed must not be exceeded
while coupling equipment? - ans -4 MPH
What is the maximum speed on an excepted track? - ans -10 MPH
When in the receiving yard what is the maximum speed unless otherwise
specified? - ans -10 MPH
What is the maximum speed on non signaled sidings? - ans -25 MPH
What is a speed that allows stopping within one-half the range of vision, stopping
short of a train, car, on-track equipment, obstruction, stop signal, derail, or
improperly lined switch? - ans -Restricted Speed
You are leaving the main track through a hand operated switch into a non
signaled siding, what is the maximum speed you can operate? - ans -15 MPH
What is the appearance of a fixed signal as viewed from the direction of an
approaching train? - ans -Signal Aspect
CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+||BRAND NEW!!
When crossing tracks with standing cars in the tracks what must the employee do
before crossing? Select all that apply - ans -1) Cross more than 25 feet from the
end of standing cars
2)stop and look both ways
When dismounting from equipment what must you do? Select all that apply
- ans -1) Stop at the bottom step or ladder rung to ensure solid footing before
dismounting.
2) Ensure a safe area to dismount clear of obstructions
When crossing over a piece of equipment utilizing 3 points of contact what must
you not do? - ans -Step on any part of the hand brake, cut lever, angle cock,
coupler, or components of the cushion underframe.
When riding on equipment maintaining 3 points of contact and being prepared
for slack or unexpected movements what else must you do? - ans -Position body
facing the equipment and look direction of travel
Do not ride on equipment unless the equipment is equipped with what? - ans -A
horizontal grab iron at least 12 inches above the floor of the car or at least one
vertical grab iron that allowed the employee to stand upright
True or False: When riding on a locomotive you are allowed to occupy the side
walkways when moving up to 20 miles per hour. - ans -True
What is required if you are approaching a close clearance or close clearance sign
while riding equipment? - ans -Dismount
What is the distance you should stand from a switch or derail associated with the
route of a passing train? - ans -30 feet
, When there is a conflict between authorized train speeds what speed should you
choose to operate? - ans -The Lowest
What are written or electronically transmitted special instructions issued by the
operating rules department concerning the safety of employees and the
movement of trains? - ans -System Bulletin
What is a publication containing instructions and other essential information
relating to the movement of trains or equipment? - ans -Timetable
When must an employee keep their Safeway Rules manual on them? - ans -When
on Duty
When there is an uncertainty regarding the rules when it comes to a situation
what must the employee do? - ans -Take the safe course
If you are not using remote control equipment, what speed must not be exceeded
while coupling equipment? - ans -4 MPH
What is the maximum speed on an excepted track? - ans -10 MPH
When in the receiving yard what is the maximum speed unless otherwise
specified? - ans -10 MPH
What is the maximum speed on non signaled sidings? - ans -25 MPH
What is a speed that allows stopping within one-half the range of vision, stopping
short of a train, car, on-track equipment, obstruction, stop signal, derail, or
improperly lined switch? - ans -Restricted Speed
You are leaving the main track through a hand operated switch into a non
signaled siding, what is the maximum speed you can operate? - ans -15 MPH
What is the appearance of a fixed signal as viewed from the direction of an
approaching train? - ans -Signal Aspect
