1|Page
ACI AGGREGATE TESTING TECHNICIAN -
LEVEL 1 - SECTION 1,2,3,4,5,6,7&8 EXAM (FULL
TEST) || 2025 ACTUAL EXAM ALL QUESTIONS
AND 100% CORRECT ANSWERS GRADE A+||
LATEST AND COMPLETE UPDATED VERSION
2025|| GUARANTEED PASS!!!
following are three of the four purposes for which aggregates are sampled; supply
the fourth.
aggregates are sampled:
a) for the acceptance or rejection of materials.
b) for the control of operations at the site of use.
c) for preliminary investigation of the potential source of supply.
d) ANSWER- b) for the control of the product at the source of supply
sampling should be done very carefully because it is as important as .
ANSWER- testing
use a method for selecting samples from conveyor belts. ANSWER- random
the four sources from which field samples can be obtained include:
1) flowing aggregate streams;
2)
3) or / and
, 2|Page
4) ANSWER- conveyor belts, stockpiles or transportation units,
roadway bases
sampling from stockpiles should follow the standard method for all sampling so
that there will be confidence in the results obtained. true or false? ANSWER-
false; you should design a sampling plan for the specific case under
consideration
the number of required by any of the methods depends on the criticality of and
variation in the properties to be measured. ANSWER- field samples
the field sample masses are based on the and of tests that will be run.
ANSWER- type, number
shipping containers for aggregate samples should be made so that the contents will
not be lost, or . ANSWER- contaminated, damaged
the reason it is difficult to obtain unbiased samples from stockpiles is because
coarse and fine particles become segregated. true or false? ANSWER- true
ACI AGGREGATE TESTING TECHNICIAN -
LEVEL 1 - SECTION 1,2,3,4,5,6,7&8 EXAM (FULL
TEST) || 2025 ACTUAL EXAM ALL QUESTIONS
AND 100% CORRECT ANSWERS GRADE A+||
LATEST AND COMPLETE UPDATED VERSION
2025|| GUARANTEED PASS!!!
following are three of the four purposes for which aggregates are sampled; supply
the fourth.
aggregates are sampled:
a) for the acceptance or rejection of materials.
b) for the control of operations at the site of use.
c) for preliminary investigation of the potential source of supply.
d) ANSWER- b) for the control of the product at the source of supply
sampling should be done very carefully because it is as important as .
ANSWER- testing
use a method for selecting samples from conveyor belts. ANSWER- random
the four sources from which field samples can be obtained include:
1) flowing aggregate streams;
2)
3) or / and
, 2|Page
4) ANSWER- conveyor belts, stockpiles or transportation units,
roadway bases
sampling from stockpiles should follow the standard method for all sampling so
that there will be confidence in the results obtained. true or false? ANSWER-
false; you should design a sampling plan for the specific case under
consideration
the number of required by any of the methods depends on the criticality of and
variation in the properties to be measured. ANSWER- field samples
the field sample masses are based on the and of tests that will be run.
ANSWER- type, number
shipping containers for aggregate samples should be made so that the contents will
not be lost, or . ANSWER- contaminated, damaged
the reason it is difficult to obtain unbiased samples from stockpiles is because
coarse and fine particles become segregated. true or false? ANSWER- true
