Show Me Tell Me Driving Questions - UK Driving
Practical Test / Direct from the Source Unedited) Questions
& Verified Answers) 2025/2026.
SHOW me how you would check that the direction indicators are working? - ans -
1) Applying the indicators OR Hazard Warning Switch
2) Check functioning of all indicators
*** May need to Switch ignition on prompt not to start ignition
Open the Bonnet identify where you would check the oil level and TELL me how
you would check that the engine has sufficient oil - ans -1) Identify the high/ low
level marking on the header tank where fitted with a cap
2) you would take the dip stick out and clean it off
3) Put the dip stick back in . then remove
4) Check that oil level is between the max and Min levels
TELL me how you make sure your head restraint is correctly adjusted so it
provides the best protection in the event of a crash? - ans -1) The head restraint
should be adjusted so the rigid part of the head restraint is at least as high as the
eye or the top of your ears and as close to the back of the head as is comfortable
2) Some restraints might not be adjustable
Open the bonnet and identify where the brake fluid reservoir is and TELL me how
you would check that you have a safe level of hydraulic brake fluid - ans -1)
Identify reservoir
2) Check level against high and low markings
TELL me how you would check the tyres to ensure that they have sufficient tread
depth that their general condition is safe to use on the road - ans -1) Ensure they
have no cuts or bulges
2) 1.6 mm of treat depth across the central 3/4 of the breath of the tyre and
around the entire outer circumference
Show me how you would check that the horn is working (off road only) - ans -1)
Check is carried out by using control (turn on ignition if necessary)
Practical Test / Direct from the Source Unedited) Questions
& Verified Answers) 2025/2026.
SHOW me how you would check that the direction indicators are working? - ans -
1) Applying the indicators OR Hazard Warning Switch
2) Check functioning of all indicators
*** May need to Switch ignition on prompt not to start ignition
Open the Bonnet identify where you would check the oil level and TELL me how
you would check that the engine has sufficient oil - ans -1) Identify the high/ low
level marking on the header tank where fitted with a cap
2) you would take the dip stick out and clean it off
3) Put the dip stick back in . then remove
4) Check that oil level is between the max and Min levels
TELL me how you make sure your head restraint is correctly adjusted so it
provides the best protection in the event of a crash? - ans -1) The head restraint
should be adjusted so the rigid part of the head restraint is at least as high as the
eye or the top of your ears and as close to the back of the head as is comfortable
2) Some restraints might not be adjustable
Open the bonnet and identify where the brake fluid reservoir is and TELL me how
you would check that you have a safe level of hydraulic brake fluid - ans -1)
Identify reservoir
2) Check level against high and low markings
TELL me how you would check the tyres to ensure that they have sufficient tread
depth that their general condition is safe to use on the road - ans -1) Ensure they
have no cuts or bulges
2) 1.6 mm of treat depth across the central 3/4 of the breath of the tyre and
around the entire outer circumference
Show me how you would check that the horn is working (off road only) - ans -1)
Check is carried out by using control (turn on ignition if necessary)
