There are a number of causes for carpet delamination -- many of them related to ________
restoration activities.
Give this one a try later!
, improper
When water intrusion results in water running through wall cavities, inspection access
holes are used to ensure that blow-in insulation has not compacted and lost its _-_____.
Give this one a try later!
R-Value
When the presence of mold is suspected, it is important to communicated with all parties
and used appropriate __________ measures.
Give this one a try later!
protective
Various cleaning and decontamination procedures must be used on Category 3 water
losses, including the removal of all ______ ______ materials affected by the water intrusion.
Give this one a try later!
highly porous
,Restorers must maintain their safety certified equipment properly. This includes replacing
_____ that are damaged, replacing damaged inlet and outlet _______, and checking for _______
electrical plugs.
Give this one a try later!
cords, screens, & damaged
LGRs produce lower _____ _________ than conventional refrigerants and continue to remove
significant water vapor down to __ GPP.
Give this one a try later!
vapor pressure & 34
During the drying process, all of the gypsum's original strength is restored. In fact, the
dried gypsum will normally be slightly ________ that before wetting.
Give this one a try later!
stronger
___________ drying systems merge the benefits of both open and closed drying: the use of
available, dry air from outside and the control offered by a closed system and
mechanical dehumidification.
, Give this one a try later!
Combination
The most effective way to speed the drying process is to remove as much of the water in
a liquid state as possible during the ___________ phase (for example, multiple extractions).
Poor extraction will significantly slow the drying process.
Give this one a try later!
extraction
To help protect technicians from the many hazards associated with contaminated water
losses, restorers need to have ready access to several items. These items protect for all
_________ _________ to the body.
Give this one a try later!
potential exposures
As with any contaminant, mold should be removed or contained before any air movers
are placed in the structure. Blowing air can spread mold spores from the ____________ area
to the __________ rooms.
Give this one a try later!
restoration activities.
Give this one a try later!
, improper
When water intrusion results in water running through wall cavities, inspection access
holes are used to ensure that blow-in insulation has not compacted and lost its _-_____.
Give this one a try later!
R-Value
When the presence of mold is suspected, it is important to communicated with all parties
and used appropriate __________ measures.
Give this one a try later!
protective
Various cleaning and decontamination procedures must be used on Category 3 water
losses, including the removal of all ______ ______ materials affected by the water intrusion.
Give this one a try later!
highly porous
,Restorers must maintain their safety certified equipment properly. This includes replacing
_____ that are damaged, replacing damaged inlet and outlet _______, and checking for _______
electrical plugs.
Give this one a try later!
cords, screens, & damaged
LGRs produce lower _____ _________ than conventional refrigerants and continue to remove
significant water vapor down to __ GPP.
Give this one a try later!
vapor pressure & 34
During the drying process, all of the gypsum's original strength is restored. In fact, the
dried gypsum will normally be slightly ________ that before wetting.
Give this one a try later!
stronger
___________ drying systems merge the benefits of both open and closed drying: the use of
available, dry air from outside and the control offered by a closed system and
mechanical dehumidification.
, Give this one a try later!
Combination
The most effective way to speed the drying process is to remove as much of the water in
a liquid state as possible during the ___________ phase (for example, multiple extractions).
Poor extraction will significantly slow the drying process.
Give this one a try later!
extraction
To help protect technicians from the many hazards associated with contaminated water
losses, restorers need to have ready access to several items. These items protect for all
_________ _________ to the body.
Give this one a try later!
potential exposures
As with any contaminant, mold should be removed or contained before any air movers
are placed in the structure. Blowing air can spread mold spores from the ____________ area
to the __________ rooms.
Give this one a try later!
