Most exterior doors are _________ high.
6 feet 4 inches
6 feet 6 inches
6 feet 8 inches
7 feet
Give this one a try later!
, 6 feet 8 inches
Maximum spacing of weep holes is _________ inches.
24
30
33
36
Give this one a try later!
33
You are responsible for the grading and excavation on the work site. Your level (transit)
reads 6.4 ft on a leveling rod that has been set up on top of a benchmark that has a given
elevation of 100.0 ft. The finish grade as shown on the blueprints is 96.80 ft. Calculate
what the rod reading should be on the finished grade after all fill has been placed,
compacted, and graded?
3.20 ft
-3.20 ft
6.40 ft
9.60 ft
Give this one a try later!
9.60 ft
Formula:
The rod reads 6.40 at an elevation of 100.0 feet. At an elevation of 96.80 feet,
what should the rod read?
Take the difference in elevation:
100.0 - 96.80 = 3.20 feet
, Add the current reading to the difference in elevation to reach the finished
grade level:
6.40 + 3.20 = 9.60 feet
What is used to check the depth of an excavation when using a builders level?
dipper stick.
leveling rod.
measuring rod.
tape measure.
Give this one a try later!
leveling rod.
Insulation is rated for heat reflectivity using which symbol?
E
I
K
R
Give this one a try later!
R
Residential plan views are generally drawn _________ scale.
1/8
1/4
, 3/8
1/2
Give this one a try later!
1/4
From the choices below, select the best definition of subcontract.
An agreement between the subcontractor and architect.
An agreement between the subcontractor and material supplier.
An agreement between the subcontractor and owner.
An agreement between the subcontractor and prime contractor.
Give this one a try later!
An agreement between the subcontractor and prime contractor.
The minimum requirement for a door leading from the attached garage into the dwelling
unit is..?
Give this one a try later!
1 3/8" solid core
The Board sets minimal standards of
Law
Material strength
6 feet 4 inches
6 feet 6 inches
6 feet 8 inches
7 feet
Give this one a try later!
, 6 feet 8 inches
Maximum spacing of weep holes is _________ inches.
24
30
33
36
Give this one a try later!
33
You are responsible for the grading and excavation on the work site. Your level (transit)
reads 6.4 ft on a leveling rod that has been set up on top of a benchmark that has a given
elevation of 100.0 ft. The finish grade as shown on the blueprints is 96.80 ft. Calculate
what the rod reading should be on the finished grade after all fill has been placed,
compacted, and graded?
3.20 ft
-3.20 ft
6.40 ft
9.60 ft
Give this one a try later!
9.60 ft
Formula:
The rod reads 6.40 at an elevation of 100.0 feet. At an elevation of 96.80 feet,
what should the rod read?
Take the difference in elevation:
100.0 - 96.80 = 3.20 feet
, Add the current reading to the difference in elevation to reach the finished
grade level:
6.40 + 3.20 = 9.60 feet
What is used to check the depth of an excavation when using a builders level?
dipper stick.
leveling rod.
measuring rod.
tape measure.
Give this one a try later!
leveling rod.
Insulation is rated for heat reflectivity using which symbol?
E
I
K
R
Give this one a try later!
R
Residential plan views are generally drawn _________ scale.
1/8
1/4
, 3/8
1/2
Give this one a try later!
1/4
From the choices below, select the best definition of subcontract.
An agreement between the subcontractor and architect.
An agreement between the subcontractor and material supplier.
An agreement between the subcontractor and owner.
An agreement between the subcontractor and prime contractor.
Give this one a try later!
An agreement between the subcontractor and prime contractor.
The minimum requirement for a door leading from the attached garage into the dwelling
unit is..?
Give this one a try later!
1 3/8" solid core
The Board sets minimal standards of
Law
Material strength
