1 of 51
Definition
Blades/cutters/drill bits etc with extremely reinforced cutting edges.
They are good for drilling various masonry materials.
Carcassing
Give this one a try later!
, Carbide Tipped Aluminum Oxide Composite
Diamond Miter Gauge
Don't know?
2 of 51
Definition
The chuck will hold a drill bit or router cutter that will be spinning in the
tool. Two examples are lathe & drill chucks.
Give this one a try later!
Finish carpentry Chuck (Drill)
Architrave corner block Countersink bit
Don't know?
, 3 of 51
Definition
Surface of finished timber that will be most visible, you tend to work
and set out measurements from the face.
Give this one a try later!
Edge Plane
Flank Face
Don't know?
4 of 51
Definition
Architrave blocks are decorative mouldings that can be installed in
place of a mitred corner when installing architraves. They can also be
used elsewhere to enhance your trim carpentry work
Give this one a try later!
Architrave Corner Block Collar Beams
, Chuck (drill) Dowel Center
Don't know?
5 of 51
Definition
An end to end joint between two pieces of timber.
Give this one a try later!
Dovetail Joint Butt Joint
Finger Joint Lap Joint
Don't know?
6 of 51
Definition
A straight round wooden peg used to align and hold timber together
in a mortice and tenon joint, 'drawer dowels'. Used commonly on
staircase to hold newel posts to stair strings.
Give this one a try later!
Definition
Blades/cutters/drill bits etc with extremely reinforced cutting edges.
They are good for drilling various masonry materials.
Carcassing
Give this one a try later!
, Carbide Tipped Aluminum Oxide Composite
Diamond Miter Gauge
Don't know?
2 of 51
Definition
The chuck will hold a drill bit or router cutter that will be spinning in the
tool. Two examples are lathe & drill chucks.
Give this one a try later!
Finish carpentry Chuck (Drill)
Architrave corner block Countersink bit
Don't know?
, 3 of 51
Definition
Surface of finished timber that will be most visible, you tend to work
and set out measurements from the face.
Give this one a try later!
Edge Plane
Flank Face
Don't know?
4 of 51
Definition
Architrave blocks are decorative mouldings that can be installed in
place of a mitred corner when installing architraves. They can also be
used elsewhere to enhance your trim carpentry work
Give this one a try later!
Architrave Corner Block Collar Beams
, Chuck (drill) Dowel Center
Don't know?
5 of 51
Definition
An end to end joint between two pieces of timber.
Give this one a try later!
Dovetail Joint Butt Joint
Finger Joint Lap Joint
Don't know?
6 of 51
Definition
A straight round wooden peg used to align and hold timber together
in a mortice and tenon joint, 'drawer dowels'. Used commonly on
staircase to hold newel posts to stair strings.
Give this one a try later!
