QUESTIONS AND WELL
VERIFIED ANSWERS
2025
Fusible links shall be located - ANS✔✔--At above each cooking appliance
Fusible links shall be - ANS✔✔--12 in in front of said item
A test shall be used on pipe using - ANS✔✔--Nitrogen or dry air not exceeding normal operating
pressure
Piping shall not - ANS✔✔--Be hydrostatic tested
Owners inspection - ANS✔✔--Monthly
Owners inspection records shall be retained - ANS✔✔--Semi-annualy
Wet chemical fire extinguisher service at - ANS✔✔--Every 6 months
Wet chemical fire extinguishing system service at - ANS✔✔--6 months
wet chemical fire extinguishing system with fire damage,corrosion,welds etc - ANS✔✔--Shall be
hydrostatic tested
, Maintenance reports shall be kept - ANS✔✔--For a year
Fixed temperature sensing elements otger than fusible metal alloys shall be replaced - ANS✔✔--
Every 12 months
Fixed temperature sensing elements of fusible metal alloys shall be replaced - ANS✔✔--Semi-
annualy
Wet chemical extinguisher hydrostatic test - ANS✔✔--In 12 years
Pior to being replaced or transported containers bearing DOT or TC shall be - ANS✔✔--Retested
or replaced
Stamping part numbers in the body of the nozzle is a - ANS✔✔--Acceptable method
Wet chemical solutions - ANS✔✔--Potassium carbonate based
Appliance flue outlet opening of cooking device is where - ANS✔✔--Vapors combustion gasses or
both leave the cooking decice
The term hood refers to - ANS✔✔--Type 1 hoods
All ash shall be removed from the chamber - ANS✔✔--At least once a day
All appliances of firebox of 0.14 volume or less shall have a - ANS✔✔--2=A rated water type or
wet chemical extinguisher
All deep fat fryers shall be installed with - ANS✔✔--16 in space
Class b gas type such as co2 and halo bottles - ANS✔✔--Shall not be permitted in the kitchen
cooking area
Manual actuators shall be between - ANS✔✔--10 to 20 feet from the system
Fusible links and automatic sprinkler heads shall be - ANS✔✔--Replaced annually
Sodium Bicarbonate can be placed next to a - ANS✔✔--Vent hood
Detectors shall be approved of - ANS✔✔--Detecting heat
Operating devices shall operate at - ANS✔✔--32F to 120F
Manual actuators shall not have a force more than - ANS✔✔--40lbs
Manual actuators shall not have a movement of more than - ANS✔✔--14 inches