PKSC 1020 EXAM 2 BATT CORRECT
100%
Three forms of packages are - ANSWER rigid, semi rigid, flexible
Which of the following materials is essential in an induction seal? - ANSWER aluminum
The permeability of a 1 mil thick film of PET is 0.50 cc/mil/day. If everything was
considered the same without other variables, what would the permeability be of the
same film that was 1.5 mils thick? - ANSWER 0.33 cc/mil/day
What type of laminating requires that the solvents are dried or evaporated off the
substrate after the piles are joined together ? - ANSWER wet bond laminating
during accelerated aging, the reaction rate - ANSWER doubles
lightweight packages are typically dropped from a greater or lesser height than heavy
packages - ANSWER greater
in the following example the outside substrate/inside substrate of the package structure
is:
lacquer
printed paper
polyethylene
foil
surlyn coated polyester - ANSWER printed paper/surlyn coated polyester
During vibration, objects are most likely to break or become damaged during what part
of the vibration spectrum? - ANSWER amplification
two thing that can decrease compression strength of boxed when stacked on a pallet
are - ANSWER overhang humidity, extended warehousing and interlocked stacking,
overhang and bulging
3 mil =___ gauge = ___ inches? - ANSWER 300, 0.003
the three types of testing one performs for the packaging industry are: - ANSWER
quality, environmental, distribution
what are two reasons for the identification of unknown materials? - ANSWER check for
patent infringement and duplicate a competitor's package
100%
Three forms of packages are - ANSWER rigid, semi rigid, flexible
Which of the following materials is essential in an induction seal? - ANSWER aluminum
The permeability of a 1 mil thick film of PET is 0.50 cc/mil/day. If everything was
considered the same without other variables, what would the permeability be of the
same film that was 1.5 mils thick? - ANSWER 0.33 cc/mil/day
What type of laminating requires that the solvents are dried or evaporated off the
substrate after the piles are joined together ? - ANSWER wet bond laminating
during accelerated aging, the reaction rate - ANSWER doubles
lightweight packages are typically dropped from a greater or lesser height than heavy
packages - ANSWER greater
in the following example the outside substrate/inside substrate of the package structure
is:
lacquer
printed paper
polyethylene
foil
surlyn coated polyester - ANSWER printed paper/surlyn coated polyester
During vibration, objects are most likely to break or become damaged during what part
of the vibration spectrum? - ANSWER amplification
two thing that can decrease compression strength of boxed when stacked on a pallet
are - ANSWER overhang humidity, extended warehousing and interlocked stacking,
overhang and bulging
3 mil =___ gauge = ___ inches? - ANSWER 300, 0.003
the three types of testing one performs for the packaging industry are: - ANSWER
quality, environmental, distribution
what are two reasons for the identification of unknown materials? - ANSWER check for
patent infringement and duplicate a competitor's package
