FDNYC F60 FIREGUARD TEST EXAM QUESTIONS WITH
COMPLETE SOLUTIONS GUARANTEED PASS BRAND NEW
2025
For hot work operation with citywide permit, the owner
of the premises of the hot work operation areas must be
notified in writing by the citywide permit holder ______
the hot work is to be started. - CORRECT ANSWER - >at
least 48 hours before
The pre-hot work check must be conducted by the
responsible person before hot work is authorized and
__________ - CORRECT ANSWER - >least once per day.
The check reports must be kept at the work site during
the work, made available for inspection by a
representative of the FDNY, and maintained on the
premises for a minimum of - CORRECT ANSWER - >48
hours after work is complete.
A pre-hot work check must be conducted at least -
CORRECT ANSWER - >once per day
, Hot work operations involving cutting or welding shall be
conducted at least - CORRECT ANSWER - >35 feet from
combustible materials and combustible waste
All other hot work operations shall be conducted at least
- CORRECT ANSWER - >25 feet from combustible
materials and combustible waste
Sprinkler system protection ____________while hot
work is performed. - CORRECT ANSWER - >must not be
shut off or impaired
When should a Fire watch be maintained - CORRECT
ANSWER - >A fire watch must be maintained during any
hot work operation.
What other duties should the Fire Watch have while on
hot water operations. - CORRECT ANSWER - >The
persons conducting a fire watch shall not have other
duties.
Where hose lines are required, they shall be connected,
charged and ready for operation - CORRECT ANSWER -
>At least one portable fire extinguisher with a minimum
2-A:20-B:C
COMPLETE SOLUTIONS GUARANTEED PASS BRAND NEW
2025
For hot work operation with citywide permit, the owner
of the premises of the hot work operation areas must be
notified in writing by the citywide permit holder ______
the hot work is to be started. - CORRECT ANSWER - >at
least 48 hours before
The pre-hot work check must be conducted by the
responsible person before hot work is authorized and
__________ - CORRECT ANSWER - >least once per day.
The check reports must be kept at the work site during
the work, made available for inspection by a
representative of the FDNY, and maintained on the
premises for a minimum of - CORRECT ANSWER - >48
hours after work is complete.
A pre-hot work check must be conducted at least -
CORRECT ANSWER - >once per day
, Hot work operations involving cutting or welding shall be
conducted at least - CORRECT ANSWER - >35 feet from
combustible materials and combustible waste
All other hot work operations shall be conducted at least
- CORRECT ANSWER - >25 feet from combustible
materials and combustible waste
Sprinkler system protection ____________while hot
work is performed. - CORRECT ANSWER - >must not be
shut off or impaired
When should a Fire watch be maintained - CORRECT
ANSWER - >A fire watch must be maintained during any
hot work operation.
What other duties should the Fire Watch have while on
hot water operations. - CORRECT ANSWER - >The
persons conducting a fire watch shall not have other
duties.
Where hose lines are required, they shall be connected,
charged and ready for operation - CORRECT ANSWER -
>At least one portable fire extinguisher with a minimum
2-A:20-B:C
