Class A Non-CDL Test Practice| Question with
100% Correct Answers
What is the maximum length allowed for second division vehicles, empty or
loaded? What are the exceptions? - ✔️✔️42 ft
Exceptions are vehicles hauling pipes, poles, machinery, or other structural objects
that cannot be quickly taken apart. However, the length of these objects may not
exceed 80 feet except for public utility emergency repairs or for those holding
special permits. These vehicles are not allowed to operate during dark or on
Saturdays, Sundays, and legal holidays.
At what distance must warning flags, flares, or other approved warning devices be
visible? - ✔️✔️500 feet
What are the requirements for reducing overweight on vehicles? - ✔️✔️- The driver
must stop the vehicle in a suitable place.7 - - The truck must remain standing until
a part of the load is removed or shifted to com-
ply with the law.
- Any material unloaded shall be the responsibility of the owner or operator.
- The driver or owner shall be arrested by the officer who finds the vehicle
overweight.No arrest ticket will be issued if the overweight is 2,000 pounds or less
and the driver or owner shifts or removes the excess. This arrest tolerance is
reduced to 1,000 pounds for vehicle combinations with a registered weight in
exceeding 80,000 pounds. Special permission to move those vehicles exceeding
maximum size and weight limits may be obtained from IDOT.
What types of vehicles are required to stop at railroad crossings? - ✔️✔️If you drive
any second division vehicle carrying passengers for hire, any bus that meets all the
special requirements for school buses, and second division vehicles required to be
placarded by federal and state law for carrying hazardous materials
What is the maximum height, including load, for all vehicles? - ✔️✔️The maximum
height for all vehicles on all highways is 13 feet, 6 inches, including load, from the
underside of the tire to the top of the vehicle.
How do you mark a load that projects 4 feet or more to the rear of the vehicle? -
✔️✔️Projecting loads extending 4 feet or more to the rear of a vehicle must display a
red light to the rear of the load. The red light must be seen for at least 500 feet
100% Correct Answers
What is the maximum length allowed for second division vehicles, empty or
loaded? What are the exceptions? - ✔️✔️42 ft
Exceptions are vehicles hauling pipes, poles, machinery, or other structural objects
that cannot be quickly taken apart. However, the length of these objects may not
exceed 80 feet except for public utility emergency repairs or for those holding
special permits. These vehicles are not allowed to operate during dark or on
Saturdays, Sundays, and legal holidays.
At what distance must warning flags, flares, or other approved warning devices be
visible? - ✔️✔️500 feet
What are the requirements for reducing overweight on vehicles? - ✔️✔️- The driver
must stop the vehicle in a suitable place.7 - - The truck must remain standing until
a part of the load is removed or shifted to com-
ply with the law.
- Any material unloaded shall be the responsibility of the owner or operator.
- The driver or owner shall be arrested by the officer who finds the vehicle
overweight.No arrest ticket will be issued if the overweight is 2,000 pounds or less
and the driver or owner shifts or removes the excess. This arrest tolerance is
reduced to 1,000 pounds for vehicle combinations with a registered weight in
exceeding 80,000 pounds. Special permission to move those vehicles exceeding
maximum size and weight limits may be obtained from IDOT.
What types of vehicles are required to stop at railroad crossings? - ✔️✔️If you drive
any second division vehicle carrying passengers for hire, any bus that meets all the
special requirements for school buses, and second division vehicles required to be
placarded by federal and state law for carrying hazardous materials
What is the maximum height, including load, for all vehicles? - ✔️✔️The maximum
height for all vehicles on all highways is 13 feet, 6 inches, including load, from the
underside of the tire to the top of the vehicle.
How do you mark a load that projects 4 feet or more to the rear of the vehicle? -
✔️✔️Projecting loads extending 4 feet or more to the rear of a vehicle must display a
red light to the rear of the load. The red light must be seen for at least 500 feet
