BoilerMaker Maintenance NCCER || very Flawless.
At what angle is a chain fall usually used? correct answers Vertical
Pipeline PNID ask for what size the main line is correct answers 12"
What does the PNID ask for material correct answers A-335
When attaching two pipes together what fitting is used? correct answers Coupling
When attaching two different pipe sizes together what fitting is used? correct answers Bushing
What is a tigger? correct answers Winch
What controls water in the towers? correct answers (Distributors) internally installed above a
packed bed. Which performs the job in providing a finite liquid distribution over the packed bed.
What is the minimum rated tie off point? correct answers 5,000lbs
What causes a kink in a wire sling? correct answers Sling against a support/structure
Where is the flame arrester located? correct answers At the handle
All of the following are examples of the internal many hardware except? correct answers Slide
fastener
The fitting that makes it easy to disassemble threaded pipe is? correct answers Union
What is the purpose of a gasket? correct answers To create a seal between two stationary parts
What is the first consideration when making a gasket? correct answers Material compatibility
Ring gaskets may be effected by all of the following except? correct answers Number of bolts
Which way should the teeth face on the hacksaw blade? correct answers Away from handle
The pressure of 1" and 10" pipe when both are 20' tall? correct answers The pressure is both the
same
When making a threaded connection and it stops on second thread? correct answers Stop
something is wrong
When using a sealing ring on heat exchangers what material is used to seal off in between the
floating tube sheet and test ring? correct answers Permatex
For duct bolted together there is usually some kind of? correct answers Gasket
At what angle is a chain fall usually used? correct answers Vertical
Pipeline PNID ask for what size the main line is correct answers 12"
What does the PNID ask for material correct answers A-335
When attaching two pipes together what fitting is used? correct answers Coupling
When attaching two different pipe sizes together what fitting is used? correct answers Bushing
What is a tigger? correct answers Winch
What controls water in the towers? correct answers (Distributors) internally installed above a
packed bed. Which performs the job in providing a finite liquid distribution over the packed bed.
What is the minimum rated tie off point? correct answers 5,000lbs
What causes a kink in a wire sling? correct answers Sling against a support/structure
Where is the flame arrester located? correct answers At the handle
All of the following are examples of the internal many hardware except? correct answers Slide
fastener
The fitting that makes it easy to disassemble threaded pipe is? correct answers Union
What is the purpose of a gasket? correct answers To create a seal between two stationary parts
What is the first consideration when making a gasket? correct answers Material compatibility
Ring gaskets may be effected by all of the following except? correct answers Number of bolts
Which way should the teeth face on the hacksaw blade? correct answers Away from handle
The pressure of 1" and 10" pipe when both are 20' tall? correct answers The pressure is both the
same
When making a threaded connection and it stops on second thread? correct answers Stop
something is wrong
When using a sealing ring on heat exchangers what material is used to seal off in between the
floating tube sheet and test ring? correct answers Permatex
For duct bolted together there is usually some kind of? correct answers Gasket
