MA HOISTING LICENSE QUESTIONS &
ANSWERS 100% CORRECT!!
WHAT DO YOU NEED TO INSPECT? - ANSWERROPES
CABLES
CLUTCHES
CHAINS AND BEARINGS
GEARS AND ALL OTHER PARTS SUBJECT TO WEAR
INPECTION FORMS - ANSWERSHOULD BE FILLED OUT AND KEPT ON FILE
FOR THE LIFE OF THE MACHINE
SHOULD BE INSPECTED DAILY OR AT EVERY SHIFT OR EVERY 30 DAYS
CUBIC YARDS - ANSWERA STANDARD WHEELBARROW:
1 CUBIC YARD
TRI AXEL DUMP TRUCKS:
APROX. 18 CUBIC YARDS
DUMP TRAILERS:
APROX. 23 CUBIC YARDS
A HOISTING LICENSE IS REQUIRED FOR WHAT TYPE OF EQUIPMENT? -
ANSWERMINIMUM CAPABILITY OF HOISTING THE LOAD HIGHER THAN 10 FT
OR
LIFTING LOADS GREATER THAN 500 POUNDS
OR
EQUIPMENT THAT THE CAPACITY OF THE BUCKET EXCEEDS 1/4 CUBIC
YARDS
WHAT DOES A SLOW MOVING VECHILE TRIANGLE LOOK LIKE AND WHAT
SPEED CAN IT NOT EXCEED? - ANSWERRED TRIANGLE WITH ORANGE
CENTER
25MPH
WHAT SHOULD BE DONE WHEN DRIVING UP A STEEP GRADE WITH A FOUR
WHEEL BUCKHOE? - ANSWERFILL FRONT BUCKET WITH BALLAST
WHEN IS IT ALLOWED TO CARRY A LOAD OVER SOMEONE? -
ANSWERNEVER
HOW MANY AND HOW ARE CABLE CLIPS INSTALLED ON A CABLE? -
ANSWERMINIMUM 3
U-BOLT ON THE DEAD AND SADDLE ON THE LIVE
, IS A BACK-UP ALARM NEEDED ON ALL MACHINES? - ANSWERYES
A TRENCH SHOULD BE BACKFILLED IN WHAT? - ANSWERLIFTS
BOOM STOPS ARE USED FOR WHAT? - ANSWERTO PREVENT THE BOOM
FROM TIPPING OVER BACKWARDS
WHAT SHOULD YOU CHECK BEFORE LOADING A BACKHOE ON A
TRANSPORTING VECHILE? - ANSWERIF THE TRAILER HAS BEEN CHOCKED
IN ORDER TO DIG ANYWHERE, WHO NEEDS TO BE CALLED AND HOW MUCH
NOTICE YOU PROVIDE? - ANSWERDIG SAFE
72 HRS (3 DAYS)
HOW FAR BELOW THE SURACE OF THE GROUND IS A TRENCH? - ANSWER3
OR MORE FEET & 15 FT OR LESS WIDE WHEN MEASSURED AT THE BOTTOM
OF THE TRENCH
C.M.R. STAND FOR? - ANSWERCODE OF MA REGULATIONS
HOW SHOULD THE FORKS BE WHEN APPROACHING A LOADED PALLET? -
ANSWERSQUARE AND LEVEL
ON A SMOOTH SURFACE, HOW HIGH SHOULD A LOAD BE CARRIED? -
ANSWER3" TO 6"
HOW IS MOMENTUM CREATED? - ANSWERSTARTING, STOPPING, TURNING
WHAT SHOULD YOU DO WHEN TRAVELING DOWN A HILL OR SLOPE? -
ANSWERUSE SAME GEAR YOU USE TO GO UP THE HILL TO GO DOWN
WHEN THE FORKLIFT IS BEING OPERATED AND THE GAUGES DO NOT
REGISTER NORMAL, WHAT SHOULD YOU DO? - ANSWERTURN THE
MACHINE OFF AND NOTIFY SUPERVISOR
THE APPROVED HAND SIGNALS FOR CRANE OPERATIONS ARE
ADMINISTERED BY WHO? - ANSWERAMERICAN NATIONAL INSTIUTE (ANSI)
AMERICAN SOCIAL OF MECHANICAL ENGINEERS (ASME)
THE APPROVED HAND SIGNALS FOR EXCAVATIONS IS ADMINISTERED BY? -
ANSWERS.A.E.
THE PURPOSE OF THE 520; C.M.R.6:00 IS TO? - ANSWERESTABLISH RULES
AND REGULATIONS FOR PUBLIC SAFETY
THE OPERATOR OF MATERIAL HANDLING AND MOVING OF EQUIPMENT
SHOULD HAVE WHAT TYPE OF PROTECTION? - ANSWERWHEN EXPOSED TO
OVERHEAD HAZARDS OR ELEMENTS SHOULD BE PROTECTED BY A CAB OR
AN EQUIVALENT COVERING THAT HAS ADEQUATE PROTECTION
ANSWERS 100% CORRECT!!
WHAT DO YOU NEED TO INSPECT? - ANSWERROPES
CABLES
CLUTCHES
CHAINS AND BEARINGS
GEARS AND ALL OTHER PARTS SUBJECT TO WEAR
INPECTION FORMS - ANSWERSHOULD BE FILLED OUT AND KEPT ON FILE
FOR THE LIFE OF THE MACHINE
SHOULD BE INSPECTED DAILY OR AT EVERY SHIFT OR EVERY 30 DAYS
CUBIC YARDS - ANSWERA STANDARD WHEELBARROW:
1 CUBIC YARD
TRI AXEL DUMP TRUCKS:
APROX. 18 CUBIC YARDS
DUMP TRAILERS:
APROX. 23 CUBIC YARDS
A HOISTING LICENSE IS REQUIRED FOR WHAT TYPE OF EQUIPMENT? -
ANSWERMINIMUM CAPABILITY OF HOISTING THE LOAD HIGHER THAN 10 FT
OR
LIFTING LOADS GREATER THAN 500 POUNDS
OR
EQUIPMENT THAT THE CAPACITY OF THE BUCKET EXCEEDS 1/4 CUBIC
YARDS
WHAT DOES A SLOW MOVING VECHILE TRIANGLE LOOK LIKE AND WHAT
SPEED CAN IT NOT EXCEED? - ANSWERRED TRIANGLE WITH ORANGE
CENTER
25MPH
WHAT SHOULD BE DONE WHEN DRIVING UP A STEEP GRADE WITH A FOUR
WHEEL BUCKHOE? - ANSWERFILL FRONT BUCKET WITH BALLAST
WHEN IS IT ALLOWED TO CARRY A LOAD OVER SOMEONE? -
ANSWERNEVER
HOW MANY AND HOW ARE CABLE CLIPS INSTALLED ON A CABLE? -
ANSWERMINIMUM 3
U-BOLT ON THE DEAD AND SADDLE ON THE LIVE
, IS A BACK-UP ALARM NEEDED ON ALL MACHINES? - ANSWERYES
A TRENCH SHOULD BE BACKFILLED IN WHAT? - ANSWERLIFTS
BOOM STOPS ARE USED FOR WHAT? - ANSWERTO PREVENT THE BOOM
FROM TIPPING OVER BACKWARDS
WHAT SHOULD YOU CHECK BEFORE LOADING A BACKHOE ON A
TRANSPORTING VECHILE? - ANSWERIF THE TRAILER HAS BEEN CHOCKED
IN ORDER TO DIG ANYWHERE, WHO NEEDS TO BE CALLED AND HOW MUCH
NOTICE YOU PROVIDE? - ANSWERDIG SAFE
72 HRS (3 DAYS)
HOW FAR BELOW THE SURACE OF THE GROUND IS A TRENCH? - ANSWER3
OR MORE FEET & 15 FT OR LESS WIDE WHEN MEASSURED AT THE BOTTOM
OF THE TRENCH
C.M.R. STAND FOR? - ANSWERCODE OF MA REGULATIONS
HOW SHOULD THE FORKS BE WHEN APPROACHING A LOADED PALLET? -
ANSWERSQUARE AND LEVEL
ON A SMOOTH SURFACE, HOW HIGH SHOULD A LOAD BE CARRIED? -
ANSWER3" TO 6"
HOW IS MOMENTUM CREATED? - ANSWERSTARTING, STOPPING, TURNING
WHAT SHOULD YOU DO WHEN TRAVELING DOWN A HILL OR SLOPE? -
ANSWERUSE SAME GEAR YOU USE TO GO UP THE HILL TO GO DOWN
WHEN THE FORKLIFT IS BEING OPERATED AND THE GAUGES DO NOT
REGISTER NORMAL, WHAT SHOULD YOU DO? - ANSWERTURN THE
MACHINE OFF AND NOTIFY SUPERVISOR
THE APPROVED HAND SIGNALS FOR CRANE OPERATIONS ARE
ADMINISTERED BY WHO? - ANSWERAMERICAN NATIONAL INSTIUTE (ANSI)
AMERICAN SOCIAL OF MECHANICAL ENGINEERS (ASME)
THE APPROVED HAND SIGNALS FOR EXCAVATIONS IS ADMINISTERED BY? -
ANSWERS.A.E.
THE PURPOSE OF THE 520; C.M.R.6:00 IS TO? - ANSWERESTABLISH RULES
AND REGULATIONS FOR PUBLIC SAFETY
THE OPERATOR OF MATERIAL HANDLING AND MOVING OF EQUIPMENT
SHOULD HAVE WHAT TYPE OF PROTECTION? - ANSWERWHEN EXPOSED TO
OVERHEAD HAZARDS OR ELEMENTS SHOULD BE PROTECTED BY A CAB OR
AN EQUIVALENT COVERING THAT HAS ADEQUATE PROTECTION
