MSF Course Exam 600 QUESTIONS AND
ANSWERS 2025 GRADED A {TESTBANK}
Complete the Controls Quiz on page 7 and check your answers -
CORRECT ANSWER Just google a picture of motorcycle controls and
study it.
List the five steps of the engine pre-start routine. - CORRECT ANSWER
FINE-C; Fuel, Ignition, Neutral, Engine cut-off switch, Choke/Clutch.
What are the three steps to follow when shutting off the engine? -
CORRECT ANSWER 1. Turn the engine cut-off switch to off with your
right thumb. 2. Turn the ignition switch to off. 3. Turn the fuel supply
valve to off.
What is the friction zone? - CORRECT ANSWER A small area of travel
in the clutch lever that controls connection the engine to the rear
wheel.
What does squeezing the clutch lever do? - CORRECT ANSWER
Removes power from the rear wheel.
What must you do if you start to lose control of the motorcycle? -
CORRECT ANSWER Squeeze in the clutch firmly and use the brakes
as needed.
What is the position of the right wrist for good riding posture? -
CORRECT ANSWER Fingers around the throttle with a flat wrist.
What are the other elements of proper riding posture? - CORRECT
ANSWER Keep your back straight, head and eyes up, feet on
footrests near the controls.
,How do you initiate motorcycle lean at speeds higher than walking
speed? - CORRECT ANSWER Lean the motorcycle and turn the
handlebars in the direction you want to go.
What are the four action steps for making a basic turn? - CORRECT
ANSWER Slow, Look, Press and Roll.
What is the three-step strategy for curves and what does each step
mean? - CORRECT ANSWER Search-Setup-Smooth. Search: while
approaching a curve search for key information. Setup: adjust speed
and lane position as necessary before entering. Smooth: operate the
controls so there are no jerky movements.
In what type of turn does counterweighting help? - CORRECT ANSWER
U-turns
What gear should you be in when coming to a stop and why? -
CORRECT ANSWER First gear, so it is easier to start rolling again
and so you don't stall.
What is the benefit of squaring the handlebars when coming to a stop?
- CORRECT ANSWER So the motorcycle is easy to hold up.
Why does the front brake have more stopping power than the rear
brake? - CORRECT ANSWER The weight shift pushes the front tire
giving it more grip.
How does the motorcycles weight sh - CORRECT ANSWER It shifts
forward.
How do you stop in a curve? - CORRECT ANSWER Gradually apply
both brakes while straightening out the motorcycle.
Why do you change gears? - CORRECT ANSWER To match the engine
speed with the road speed.
List the three-step process to shift to a higher gear. - CORRECT
ANSWER Roll off, lift, ease out.
,List the three-step process to shift to a lower gear. - CORRECT
ANSWER Roll off, press down, ease out.
What is engine braking? - CORRECT ANSWER Shifting to a lower gear
and easing out the clutch to slow down.
What is the position of the clutch lever when making a stop? -
CORRECT ANSWER Fully squeezed.
List the four preparations to ride. - CORRECT ANSWER 1. You fit the
bike. 2. Inspect the bike. 3. Wear protective gear. 4. Have a good
mental attitude with safety as your priority.
How should your motorcycle fit you? - CORRECT ANSWER The seat
should be low enough for you to reach the ground with your feet to
support the motorcycle.
What is T-CLOCS and what does each letter stand for? - CORRECT
ANSWER T- Tires and Wheels. C- Controls. L- Lights and Mirrors. O- Oil
and Other Fluids. C- Chassis. S- Stands.
What are the three primary purposes of riding gear? - CORRECT
ANSWER 1. Keeps you comfortable and focused. 2. Keeps your body
protected. 3. Keeps you visible.
What does ATGATT mean? - CORRECT ANSWER All the gear, all the
time.
What type of injury accounts for the majority of motorcycle-related
deaths? - CORRECT ANSWER Head injury.
What are the four basic parts of a helmet? - CORRECT ANSWER
Outer shell, impact absorbing liner, comfort padding, retention system.
What is the difference between a full-face-coverage helmet and a
three-quarter-coverage helmet? - CORRECT ANSWER A full face
helmet covers the chin, making it safer.
, What stickers are likely to indicate a well-made helmet? - CORRECT
ANSWER D.O.T, E.C.E and Snell
How should a helmet fit? - CORRECT ANSWER Snugly with no
irritating pressure points.
What are some tips to care for a helmet? - CORRECT ANSWER Leave
a damp towel on it then wipe off any dirtiness, wash removable liners.
Are ordinary glasses or sunglasses alone sufficient eye protection? -
CORRECT ANSWER No.
What types of eye and/or face protection can a rider choose? -
CORRECT ANSWER Face shields and/or goggles.
What are four considerations about eye and face protection? -
CORRECT ANSWER 1. Flip up shields should be down. 2. Face and
eye protection should be free of scratches. 3. Clear shields should be
used at night. 4. Goggles should be worn over helmet.
What is the value of appropriate footwear? - CORRECT ANSWER
Protection from road hazards, burns from exhaust pipes, gripping
pavement and footrests, and protection from foot and ankle injuries.
What features of a full-fingered glove help a rider? - CORRECT
ANSWER Protects hands from wind, sun, heat, and cold. Improves
grip, protects hands in case of a fall.
What is the value of motorcycle-specific clothing? - CORRECT
ANSWER It is designed to fit comfortably in a riding position, and its
armor provides protection.
How can motorcycle riding gear make you more visible? - CORRECT
ANSWER You can wear bright colors and reflective vests.
ANSWERS 2025 GRADED A {TESTBANK}
Complete the Controls Quiz on page 7 and check your answers -
CORRECT ANSWER Just google a picture of motorcycle controls and
study it.
List the five steps of the engine pre-start routine. - CORRECT ANSWER
FINE-C; Fuel, Ignition, Neutral, Engine cut-off switch, Choke/Clutch.
What are the three steps to follow when shutting off the engine? -
CORRECT ANSWER 1. Turn the engine cut-off switch to off with your
right thumb. 2. Turn the ignition switch to off. 3. Turn the fuel supply
valve to off.
What is the friction zone? - CORRECT ANSWER A small area of travel
in the clutch lever that controls connection the engine to the rear
wheel.
What does squeezing the clutch lever do? - CORRECT ANSWER
Removes power from the rear wheel.
What must you do if you start to lose control of the motorcycle? -
CORRECT ANSWER Squeeze in the clutch firmly and use the brakes
as needed.
What is the position of the right wrist for good riding posture? -
CORRECT ANSWER Fingers around the throttle with a flat wrist.
What are the other elements of proper riding posture? - CORRECT
ANSWER Keep your back straight, head and eyes up, feet on
footrests near the controls.
,How do you initiate motorcycle lean at speeds higher than walking
speed? - CORRECT ANSWER Lean the motorcycle and turn the
handlebars in the direction you want to go.
What are the four action steps for making a basic turn? - CORRECT
ANSWER Slow, Look, Press and Roll.
What is the three-step strategy for curves and what does each step
mean? - CORRECT ANSWER Search-Setup-Smooth. Search: while
approaching a curve search for key information. Setup: adjust speed
and lane position as necessary before entering. Smooth: operate the
controls so there are no jerky movements.
In what type of turn does counterweighting help? - CORRECT ANSWER
U-turns
What gear should you be in when coming to a stop and why? -
CORRECT ANSWER First gear, so it is easier to start rolling again
and so you don't stall.
What is the benefit of squaring the handlebars when coming to a stop?
- CORRECT ANSWER So the motorcycle is easy to hold up.
Why does the front brake have more stopping power than the rear
brake? - CORRECT ANSWER The weight shift pushes the front tire
giving it more grip.
How does the motorcycles weight sh - CORRECT ANSWER It shifts
forward.
How do you stop in a curve? - CORRECT ANSWER Gradually apply
both brakes while straightening out the motorcycle.
Why do you change gears? - CORRECT ANSWER To match the engine
speed with the road speed.
List the three-step process to shift to a higher gear. - CORRECT
ANSWER Roll off, lift, ease out.
,List the three-step process to shift to a lower gear. - CORRECT
ANSWER Roll off, press down, ease out.
What is engine braking? - CORRECT ANSWER Shifting to a lower gear
and easing out the clutch to slow down.
What is the position of the clutch lever when making a stop? -
CORRECT ANSWER Fully squeezed.
List the four preparations to ride. - CORRECT ANSWER 1. You fit the
bike. 2. Inspect the bike. 3. Wear protective gear. 4. Have a good
mental attitude with safety as your priority.
How should your motorcycle fit you? - CORRECT ANSWER The seat
should be low enough for you to reach the ground with your feet to
support the motorcycle.
What is T-CLOCS and what does each letter stand for? - CORRECT
ANSWER T- Tires and Wheels. C- Controls. L- Lights and Mirrors. O- Oil
and Other Fluids. C- Chassis. S- Stands.
What are the three primary purposes of riding gear? - CORRECT
ANSWER 1. Keeps you comfortable and focused. 2. Keeps your body
protected. 3. Keeps you visible.
What does ATGATT mean? - CORRECT ANSWER All the gear, all the
time.
What type of injury accounts for the majority of motorcycle-related
deaths? - CORRECT ANSWER Head injury.
What are the four basic parts of a helmet? - CORRECT ANSWER
Outer shell, impact absorbing liner, comfort padding, retention system.
What is the difference between a full-face-coverage helmet and a
three-quarter-coverage helmet? - CORRECT ANSWER A full face
helmet covers the chin, making it safer.
, What stickers are likely to indicate a well-made helmet? - CORRECT
ANSWER D.O.T, E.C.E and Snell
How should a helmet fit? - CORRECT ANSWER Snugly with no
irritating pressure points.
What are some tips to care for a helmet? - CORRECT ANSWER Leave
a damp towel on it then wipe off any dirtiness, wash removable liners.
Are ordinary glasses or sunglasses alone sufficient eye protection? -
CORRECT ANSWER No.
What types of eye and/or face protection can a rider choose? -
CORRECT ANSWER Face shields and/or goggles.
What are four considerations about eye and face protection? -
CORRECT ANSWER 1. Flip up shields should be down. 2. Face and
eye protection should be free of scratches. 3. Clear shields should be
used at night. 4. Goggles should be worn over helmet.
What is the value of appropriate footwear? - CORRECT ANSWER
Protection from road hazards, burns from exhaust pipes, gripping
pavement and footrests, and protection from foot and ankle injuries.
What features of a full-fingered glove help a rider? - CORRECT
ANSWER Protects hands from wind, sun, heat, and cold. Improves
grip, protects hands in case of a fall.
What is the value of motorcycle-specific clothing? - CORRECT
ANSWER It is designed to fit comfortably in a riding position, and its
armor provides protection.
How can motorcycle riding gear make you more visible? - CORRECT
ANSWER You can wear bright colors and reflective vests.
