Industrial Maintenance Mid Term exam
122 complete solutions 100% correct.
Industrial Maintenance Mid Term exam
122 complete solutions 100% correct.
Companies with strong safety cultures usually have lower - ANSWER turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of - ANSWER
unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a - ANSWER job safety analysis
A measure of the probability, consequences, and exposure related to an event is referred to - ANSWER
risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to -
ANSWER cover the opening and label the cover
The D-ring or support point on a safety harness should be placed - ANSWER between the shoulder
blades
A personal fall arrest system should be inspected monthly by a - ANSWER competent person
Lanyards that have no shock-absorbing features are used for - ANSWER positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where the ladder touches the platform or roof by at least - ANSWER 3 feet
When performing overhead work on scaffolding, what protective measures must be taken to prevent
objects from falling and striking a person below? - ANSWER Toeboards, debris nets, or canopies must be
applied.
, Industrial Maintenance Mid Term exam
122 complete solutions 100% correct.
When stacking materials such as bricks or block, do not stack materials beyond a - ANSWER 4:1 height-
to-base ratio
Benching systems are prohibited in - ANSWER Type C soils
In the absence of other information, all soil in an excavation should be treated as if it is - ANSWER Type
C soils
Daily inspection of an excavation must be performed by a(n) - ANSWER competent person
One of the most common grounding systems used for protection against accidental electrical shock is -
ANSWER three-wire system
A system that protects workers from the release of hazardous energy while they work with machines
and equipment is referred to as - ANSWER lockout/ tagout
A polarized electrical receptacle is used for - ANSWER double-insulated tools
In a lockout/ tagout situation, a personal lock and tag must be removed by - ANSWER the person who
applied them
Hard hats should be made of fiberglass or - ANSWER reinforced plastic
A good general rule about hearing protection is that it should be used if you must raise your voice for
someone to hear you when they are - ANSWER 2 feet (61 cm) away
When there is the potential to be exposed to asbestos, workers must - ANSWER report it to a supervisor
and avoid disturbing it
122 complete solutions 100% correct.
Industrial Maintenance Mid Term exam
122 complete solutions 100% correct.
Companies with strong safety cultures usually have lower - ANSWER turnover
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of - ANSWER
unsafe conditions
The activity that consists of breaking a job into its component tasks and then analyzing each step for
potential hazards is called a - ANSWER job safety analysis
A measure of the probability, consequences, and exposure related to an event is referred to - ANSWER
risk
If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to -
ANSWER cover the opening and label the cover
The D-ring or support point on a safety harness should be placed - ANSWER between the shoulder
blades
A personal fall arrest system should be inspected monthly by a - ANSWER competent person
Lanyards that have no shock-absorbing features are used for - ANSWER positioning
When placing a ladder against a platform or roof, the top of the ladder should extend above the point
where the ladder touches the platform or roof by at least - ANSWER 3 feet
When performing overhead work on scaffolding, what protective measures must be taken to prevent
objects from falling and striking a person below? - ANSWER Toeboards, debris nets, or canopies must be
applied.
, Industrial Maintenance Mid Term exam
122 complete solutions 100% correct.
When stacking materials such as bricks or block, do not stack materials beyond a - ANSWER 4:1 height-
to-base ratio
Benching systems are prohibited in - ANSWER Type C soils
In the absence of other information, all soil in an excavation should be treated as if it is - ANSWER Type
C soils
Daily inspection of an excavation must be performed by a(n) - ANSWER competent person
One of the most common grounding systems used for protection against accidental electrical shock is -
ANSWER three-wire system
A system that protects workers from the release of hazardous energy while they work with machines
and equipment is referred to as - ANSWER lockout/ tagout
A polarized electrical receptacle is used for - ANSWER double-insulated tools
In a lockout/ tagout situation, a personal lock and tag must be removed by - ANSWER the person who
applied them
Hard hats should be made of fiberglass or - ANSWER reinforced plastic
A good general rule about hearing protection is that it should be used if you must raise your voice for
someone to hear you when they are - ANSWER 2 feet (61 cm) away
When there is the potential to be exposed to asbestos, workers must - ANSWER report it to a supervisor
and avoid disturbing it
