3/16/25, 4:49 PM Last RCO Final
Last RCO Final
LAST RCO NEWEST ACTUAL FINAL EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+||BRAND NEW VERSION
COMPLETE EXAM FOR STUDY
If the tilt feature is allowed to An emergency brake application
time out, what brake
application will result?
If the secondary operator Both RCO's must perform the recovery procedure
places the RCT into
emergency, which RCO(s) must The Secondary RCO must recover the
recover the emergency? emergency application first
What are all movements in Shoving movements
remote control operations
considered?
1. Place speed selector to stop
List the steps to recover an
2. Move the independent brake override lever to emergency
emergency brake
application 3. Press the vigilance toggle
4. Place independent brake override lever to release
When the RCO uses cameras 4 mph until the crossing is occupied
to protect a road crossing
what speed must movement
enter the crossing?
1. Move the speed selector to stop
List the steps for recovering a
2. Toggle the automatic brake selector to full
full service brake
application 3. Press the vigilance toggle
4. Move the automatic brake selector to release
What is the first RCT feature The tilt feature
the operator tests when
initially setting up a locomotive
for remote operation?
What condition would cause a Tilting the RCT by more than 45 degrees
steady tone alarm?
1/1
4
, 3/16/25, 4:49 PM Last RCO Final
Which RCT component will The independent brake override lever
send an emergency stop
command to the RCL?
How would a RCO respond Press a vigilance toggle
when a beeping or
pulsing alarm sounds on the
RCT?
What is the preferred method of Ramping the speed
slowing or stopping selector or
your movement? Using the coast feature
If the primary RCT would fail, Re-link as a single RCO
how would the
secondary RCO be able to
continue working?
After making verbal Press the pitch button
confirmation, how does the
primary RCO initiate a pitch?
How many seconds does the 10 seconds
secondary RCO have to
accept the pitch?
How does the secondary RCO Press the vigilance toggle
accept the pitch?
After initiating the pitch, how Move any of the RCT levers or switches
could the primary RCO out of their current position
cancel it?
Just before a coupling is made, Move the speed selector from
what must the RCO do to couple to the stop position
avoid "shock loading"
(making a rough/hard
joint)?
The vigilance feature on the 50 seconds
RCT will begin to sound an
alarm after how many seconds
of inactivity?
How many seconds does the 10 seconds
RCO have to respond to
the vigilance pulsing alarm?
What brake application will occur A full service application
when the vigilance
feature is allowed to time out?
2/1
4
Last RCO Final
LAST RCO NEWEST ACTUAL FINAL EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) |ALREADY GRADED A+||BRAND NEW VERSION
COMPLETE EXAM FOR STUDY
If the tilt feature is allowed to An emergency brake application
time out, what brake
application will result?
If the secondary operator Both RCO's must perform the recovery procedure
places the RCT into
emergency, which RCO(s) must The Secondary RCO must recover the
recover the emergency? emergency application first
What are all movements in Shoving movements
remote control operations
considered?
1. Place speed selector to stop
List the steps to recover an
2. Move the independent brake override lever to emergency
emergency brake
application 3. Press the vigilance toggle
4. Place independent brake override lever to release
When the RCO uses cameras 4 mph until the crossing is occupied
to protect a road crossing
what speed must movement
enter the crossing?
1. Move the speed selector to stop
List the steps for recovering a
2. Toggle the automatic brake selector to full
full service brake
application 3. Press the vigilance toggle
4. Move the automatic brake selector to release
What is the first RCT feature The tilt feature
the operator tests when
initially setting up a locomotive
for remote operation?
What condition would cause a Tilting the RCT by more than 45 degrees
steady tone alarm?
1/1
4
, 3/16/25, 4:49 PM Last RCO Final
Which RCT component will The independent brake override lever
send an emergency stop
command to the RCL?
How would a RCO respond Press a vigilance toggle
when a beeping or
pulsing alarm sounds on the
RCT?
What is the preferred method of Ramping the speed
slowing or stopping selector or
your movement? Using the coast feature
If the primary RCT would fail, Re-link as a single RCO
how would the
secondary RCO be able to
continue working?
After making verbal Press the pitch button
confirmation, how does the
primary RCO initiate a pitch?
How many seconds does the 10 seconds
secondary RCO have to
accept the pitch?
How does the secondary RCO Press the vigilance toggle
accept the pitch?
After initiating the pitch, how Move any of the RCT levers or switches
could the primary RCO out of their current position
cancel it?
Just before a coupling is made, Move the speed selector from
what must the RCO do to couple to the stop position
avoid "shock loading"
(making a rough/hard
joint)?
The vigilance feature on the 50 seconds
RCT will begin to sound an
alarm after how many seconds
of inactivity?
How many seconds does the 10 seconds
RCO have to respond to
the vigilance pulsing alarm?
What brake application will occur A full service application
when the vigilance
feature is allowed to time out?
2/1
4
