Ag mech exam UPDATED ACTUAL Exam
Questions And CORRECT Answers
narrow - CORRECT ANSWER - If the travel speed is too fast, the welded bead is:
metal - CORRECT ANSWER - An electric arc welder is used to weld:
E6011 - CORRECT ANSWER - the type of electrode is most commonly used when
welding farms projects
grind it - CORRECT ANSWER - when preparing metal for welding, the fastest way to
clean the metal is to-
helium or argon - CORRECT ANSWER - The TIG welding process uses a non-
consumable electrode and-
arc welders - CORRECT ANSWER - construction and repairing steel farm equipment by
melting and joining the edges of metal pleces are done by using-
can be used without regular power line electricity - CORRECT ANSWER - an advantage
of a DC welder is that it
welding helmet - CORRECT ANSWER - what is used to protect the eyes of a welder from
the light rays
butt - CORRECT ANSWER - if a student walks two pieces of metal and ends in the first
position, what type of joint is made
E6011 and E6013. - CORRECT ANSWER - the two most commonly used general-
purpose electrodes for welding projects
, when welding a metal project without electrical power available, what type of arc welder should
be used? - CORRECT ANSWER - DC(direct current)
When Barry started welding, there was a lot of spatter, and the bead was flat. What caused the
spatter and bead flat. - CORRECT ANSWER - Amerperage too high
When metal is prepared for welding, it should be - CORRECT ANSWER - cleaned
What type of welder is best for welding thin steel? - CORRECT ANSWER - TIG
if a student welds two places of metal end to end in what type of joint is made? - CORRECT
ANSWER - butt
the two most commonly used general-purpose electrode projects are - CORRECT
ANSWER - e6011 and e6013
what type of electrode is most commonly used when welding farm projects - CORRECT
ANSWER - e6011
what wirer welder is used as as an automatic welder - CORRECT ANSWER - MIG
what is the proper procedure to use if an electrode sticks to metal? - CORRECT
ANSWER - moe the holder back and forth
The proper tool for removing slag from a weld is a - CORRECT ANSWER - chipping
hammar
Metal thickness, electrode size, and welding position are used to decide the: - CORRECT
ANSWER - amperage setting
Questions And CORRECT Answers
narrow - CORRECT ANSWER - If the travel speed is too fast, the welded bead is:
metal - CORRECT ANSWER - An electric arc welder is used to weld:
E6011 - CORRECT ANSWER - the type of electrode is most commonly used when
welding farms projects
grind it - CORRECT ANSWER - when preparing metal for welding, the fastest way to
clean the metal is to-
helium or argon - CORRECT ANSWER - The TIG welding process uses a non-
consumable electrode and-
arc welders - CORRECT ANSWER - construction and repairing steel farm equipment by
melting and joining the edges of metal pleces are done by using-
can be used without regular power line electricity - CORRECT ANSWER - an advantage
of a DC welder is that it
welding helmet - CORRECT ANSWER - what is used to protect the eyes of a welder from
the light rays
butt - CORRECT ANSWER - if a student walks two pieces of metal and ends in the first
position, what type of joint is made
E6011 and E6013. - CORRECT ANSWER - the two most commonly used general-
purpose electrodes for welding projects
, when welding a metal project without electrical power available, what type of arc welder should
be used? - CORRECT ANSWER - DC(direct current)
When Barry started welding, there was a lot of spatter, and the bead was flat. What caused the
spatter and bead flat. - CORRECT ANSWER - Amerperage too high
When metal is prepared for welding, it should be - CORRECT ANSWER - cleaned
What type of welder is best for welding thin steel? - CORRECT ANSWER - TIG
if a student welds two places of metal end to end in what type of joint is made? - CORRECT
ANSWER - butt
the two most commonly used general-purpose electrode projects are - CORRECT
ANSWER - e6011 and e6013
what type of electrode is most commonly used when welding farm projects - CORRECT
ANSWER - e6011
what wirer welder is used as as an automatic welder - CORRECT ANSWER - MIG
what is the proper procedure to use if an electrode sticks to metal? - CORRECT
ANSWER - moe the holder back and forth
The proper tool for removing slag from a weld is a - CORRECT ANSWER - chipping
hammar
Metal thickness, electrode size, and welding position are used to decide the: - CORRECT
ANSWER - amperage setting
