ASE BRAKES Exam #2 | 2024-2025 LATEST UPDATED| COMPLETE
QUESTIONS WITH 100% CORRECT ANSWERS| GET IT CORRECT!!
A - (answers)The brakes are dragging on a vehicle. This could be caused by:
A. Overfilled master cylinder reservoir.
B. Low vacuum to the booster.
C. Bypassing master cylinder.
D. Quick take-up valve stuck open.
B - (answers)The brake pads are worn at an angle on a vehicle with a sliding brake caliper
system. Which of the following is the most likely cause?
A. Worn caliper piston
B. Worn caliper bushings
C. Leaking caliper seal
D. Leaking caliper boot
C - (answers)A diagnostic trouble code is set for an open wheel speed sensor on the left front
sensor. The technician measures the resistance at the sensor and finds it to be within
specification. Which of the following is the most likely cause for the wheel speed sensor code?
A. Faulty ABS computer
B. Open fuse
C. Open wiring from the computer to the wheel speed sensor
D. Shorted left front ABS modulator valve
D - (answers)Technician A says a double flare line should be replaced with an ISO flare line.
Technician B says an ISO flare line should be replaced with a double flare line. Who is correct?
A - (answers)A customer is concerned that under heavy acceleration on dry pavement the
traction control light comes on and the throttle momentarily becomes unresponsive. Which of the
following is the most likely cause?
A. A tire has lost traction.
B. The accelerator pedal position (APP) sensor is faulty.
, C. The throttle position (TPS) is faulty.
D. A wheel speed sensor is faulty.
D - (answers)A vehicle has a low brake pedal. Master cylinder fluid level is correct. Which of
the following is the most likely cause?
A. Worn brake pad lining
B. Seized wheel cylinder
C. Seized caliper piston
D. Brake shoes out of adjustment.
B - (answers)The brake caliper piston boot was cut when the caliper was reassembled.
Technician A says this will cause a brake fluid leak when the caliper is reinstalled. Technician B
says this could cause the piston to bind due to contamination. Who is correct?
A. A
B. B
C. Both A and B
D. Neither A nor B
B - (answers)A parking brake cable is binding on a vehicle with front disc and rear drum brakes.
This can result in:
A. Dragging front brakes.
B. Dragging rear brakes.
C. Rusted brake drums.
D. Rusted disc brake rotors.
D - (answers)Which of the following is LEAST LIKELY to be an input to the traction control
system?
A. Throttle position sensor.
B. Wheel speed sensor
C. Engine RPM
D. Transmission input shaft RPM
QUESTIONS WITH 100% CORRECT ANSWERS| GET IT CORRECT!!
A - (answers)The brakes are dragging on a vehicle. This could be caused by:
A. Overfilled master cylinder reservoir.
B. Low vacuum to the booster.
C. Bypassing master cylinder.
D. Quick take-up valve stuck open.
B - (answers)The brake pads are worn at an angle on a vehicle with a sliding brake caliper
system. Which of the following is the most likely cause?
A. Worn caliper piston
B. Worn caliper bushings
C. Leaking caliper seal
D. Leaking caliper boot
C - (answers)A diagnostic trouble code is set for an open wheel speed sensor on the left front
sensor. The technician measures the resistance at the sensor and finds it to be within
specification. Which of the following is the most likely cause for the wheel speed sensor code?
A. Faulty ABS computer
B. Open fuse
C. Open wiring from the computer to the wheel speed sensor
D. Shorted left front ABS modulator valve
D - (answers)Technician A says a double flare line should be replaced with an ISO flare line.
Technician B says an ISO flare line should be replaced with a double flare line. Who is correct?
A - (answers)A customer is concerned that under heavy acceleration on dry pavement the
traction control light comes on and the throttle momentarily becomes unresponsive. Which of the
following is the most likely cause?
A. A tire has lost traction.
B. The accelerator pedal position (APP) sensor is faulty.
, C. The throttle position (TPS) is faulty.
D. A wheel speed sensor is faulty.
D - (answers)A vehicle has a low brake pedal. Master cylinder fluid level is correct. Which of
the following is the most likely cause?
A. Worn brake pad lining
B. Seized wheel cylinder
C. Seized caliper piston
D. Brake shoes out of adjustment.
B - (answers)The brake caliper piston boot was cut when the caliper was reassembled.
Technician A says this will cause a brake fluid leak when the caliper is reinstalled. Technician B
says this could cause the piston to bind due to contamination. Who is correct?
A. A
B. B
C. Both A and B
D. Neither A nor B
B - (answers)A parking brake cable is binding on a vehicle with front disc and rear drum brakes.
This can result in:
A. Dragging front brakes.
B. Dragging rear brakes.
C. Rusted brake drums.
D. Rusted disc brake rotors.
D - (answers)Which of the following is LEAST LIKELY to be an input to the traction control
system?
A. Throttle position sensor.
B. Wheel speed sensor
C. Engine RPM
D. Transmission input shaft RPM
