What action shall be taken if the vehicle cannot have the timing checked because of a
defective condition (e.g slipped balancer)?
Give this one a try later!
fails test
,What action should be taken during an ignition functional timing test if the vehicle has
a coil on plug (non-adjustable) ignition system?
Give this one a try later!
n/a, not adjustable
When entering parts cost for an after repairs test, what customer paid costs are to be
entered?
Give this one a try later!
all costs for diag, parts, labor rounded to the nearest dollar
What is the most important procedure to follow when performing a functional test on
an EGR system?
Give this one a try later!
follow manufacturers specifications and test procedures
During a visual inspection, a technician notices that a light duty truck has dual fuel
tanks, one OEM and the other aftermarket tank. What action should be taken by the
technician as a result of this finding?
Give this one a try later!
, Find EO# on aftermarket tank. If none found then fail the vehicle.
Should a repair station provide an invoice on a "no charge" or warranty repair?
Give this one a try later!
yes
A vehicle's ignition timing specification (per the underhood label) indicates timing
needs to be set at 12 degrees BTDC at 750 rpm. The technician performs the ignition
timing functional test and measures 15 degrees BTDC at 750 rpm. Should this vehicle
pass or fail the functional ignition timing test? What is the BAR allowed timing
variance?
Give this one a try later!
BAR allows +/- 3 degrees and +/- 100 rpm to pass vehicle
During a visual inspection, OEM catalytic converter is noted as missing, and in its
place is a small aftermarket catalytic converter. What action should be taken by the
technician as a result of this finding?
Give this one a try later!
find EO#
defective condition (e.g slipped balancer)?
Give this one a try later!
fails test
,What action should be taken during an ignition functional timing test if the vehicle has
a coil on plug (non-adjustable) ignition system?
Give this one a try later!
n/a, not adjustable
When entering parts cost for an after repairs test, what customer paid costs are to be
entered?
Give this one a try later!
all costs for diag, parts, labor rounded to the nearest dollar
What is the most important procedure to follow when performing a functional test on
an EGR system?
Give this one a try later!
follow manufacturers specifications and test procedures
During a visual inspection, a technician notices that a light duty truck has dual fuel
tanks, one OEM and the other aftermarket tank. What action should be taken by the
technician as a result of this finding?
Give this one a try later!
, Find EO# on aftermarket tank. If none found then fail the vehicle.
Should a repair station provide an invoice on a "no charge" or warranty repair?
Give this one a try later!
yes
A vehicle's ignition timing specification (per the underhood label) indicates timing
needs to be set at 12 degrees BTDC at 750 rpm. The technician performs the ignition
timing functional test and measures 15 degrees BTDC at 750 rpm. Should this vehicle
pass or fail the functional ignition timing test? What is the BAR allowed timing
variance?
Give this one a try later!
BAR allows +/- 3 degrees and +/- 100 rpm to pass vehicle
During a visual inspection, OEM catalytic converter is noted as missing, and in its
place is a small aftermarket catalytic converter. What action should be taken by the
technician as a result of this finding?
Give this one a try later!
find EO#
