The use of prefabricated wood truss systems in Type V construction creates:
Select one:
a. Holes for utility lines.
b. Small openings for crawl spaces.
c. A closed channel system between floors.
d. A large, open void between floors. - Answers d. A large, open void between floors
Which type of roof is used whenever large open floor spaces with limited interior support is needed?
Select one:
a. Lantern
b. Mansard
c. Bowstring truss
d. Sawtooth - Answers c. Bowstring Truss
What part of the window is composed of a sill, side jamb, and head jamb?
Select one:
a. Head
b. Pane
c. Sash
d. Frame - Answers d. Frame
Which of the following buildings may be exempt from local building codes?
Select one:
a. Industrial factories
b. Factory-built (mobile) homes
c. Business structures
d. School buildings - Answers b. Factory-built (mobile) homes
,Which of the following building materials absorbs heat as moisture evaporates?
Select one:
a. Gypsum
b. Reinforced concrete
c. Metal
d. Lath and plaster - Answers a. Gypsum
What type of roof is used to prevent ice damming?
Select one:
a. Rain roof
b. Photovoltaic (Solar) roof
c. Green roof
d. Cold roof - Answers d. Cold roof
What construction type is composed of materials that will not contribute to fire development or spread?
Select one:
a. Type I
b. Type III
c. Type IV
d. Type II - Answers b. Type II
When a collapse is imminent, personnel ___ in the collapse zone.
Select one:
a. Are allowed to work
b. Should never work
c. May stay for twenty minutes
d. May cautiously place an unstaffed master stream - Answers d. May cautiously place an unstaffed
master stream
The critical temperature for steel trusses is:
, Select one:
a. 300°F (149°C).
b. 900°F (482°C).
c. 1,000°F (538°C).
d. 500°F (260°C). - Answers c. 1,000°F (538°C)
What building component is designed to support the weight of a building and all its contents?
Select one:
a. Wall
b. Roof
c. Foundation
d. Floor/Ceiling - Answers c. Foundation
What building component is designed to provide drainage, support snow accumulation, and resist the
effects of wind?
Select one:
a. Roof
b. Floor/Ceiling
c. Foundation
d. Wall - Answers a. Roof
Manufactured homes built before 1976 have less ___ than those of current construction:
Select one:
a. Lightweight construction
b. Building restrictions
c. Fire resistance
d. Content load - Answers c. Fire resistance
The International Building Code (IBC©) and National Fire Protection Association (NFPA®) define
construction type based on the performance of the construction when: