NCCER Instrument Tech Test Questions
and Answers Latest Update
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Location drawing
Give this one a try later!
Where can the appropriate
What are the two types of
elevation of an instrument 2
material used for shielding?
be found?
Which of the following is a Blorage of stadl wool can
3 final control element in an 4 be considered a fire hazard
instrument loop when stored around
, Don't know?
Terms in this set (103)
Whatis the first step Verify that there is a problem
in troubleshooting a
problem in a
system?
Where can the Location drawing
appropriate
elevation of an
instrument be
found?
Chemical cleaning Elements/
of tubing attached
to instruments may
cause damage to
sensor
When making 90- 1 to 3 degrees
degree tubing bend,
allowance for
springback should
be:
an acceptable tool Ferrule
gor marking 360
degrees around the
outside ot tubing Is
a:
, What process Pressure
variable is defined
as the amount of
force exerted by a
substance over a
given unit of
measure?
Blorage of stadl Batterles/
wool can be
considered a fire
hazard when stored
around
The MINIMUM value 3psi and 4ma
of the measured
process range is
considered to be:
bubbler system is Head pressure
used to measure:
To prevent travel Mechanical stop/
damage to a limit
switch, use a(n)
When using soft By hand
rolled tubing, it must
be unrolled and
straightened:
Where would an On an installation detail
instrument fitter find
the PROPER method
to connect an
instrument to a
process tap?
and Answers Latest Update
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Location drawing
Give this one a try later!
Where can the appropriate
What are the two types of
elevation of an instrument 2
material used for shielding?
be found?
Which of the following is a Blorage of stadl wool can
3 final control element in an 4 be considered a fire hazard
instrument loop when stored around
, Don't know?
Terms in this set (103)
Whatis the first step Verify that there is a problem
in troubleshooting a
problem in a
system?
Where can the Location drawing
appropriate
elevation of an
instrument be
found?
Chemical cleaning Elements/
of tubing attached
to instruments may
cause damage to
sensor
When making 90- 1 to 3 degrees
degree tubing bend,
allowance for
springback should
be:
an acceptable tool Ferrule
gor marking 360
degrees around the
outside ot tubing Is
a:
, What process Pressure
variable is defined
as the amount of
force exerted by a
substance over a
given unit of
measure?
Blorage of stadl Batterles/
wool can be
considered a fire
hazard when stored
around
The MINIMUM value 3psi and 4ma
of the measured
process range is
considered to be:
bubbler system is Head pressure
used to measure:
To prevent travel Mechanical stop/
damage to a limit
switch, use a(n)
When using soft By hand
rolled tubing, it must
be unrolled and
straightened:
Where would an On an installation detail
instrument fitter find
the PROPER method
to connect an
instrument to a
process tap?
