Safety Certification Latest Exam
Questions 100% Well Answered.
The first step to a job safety analysis is to:
A. Prepare a list of potential problems
b. document an itemized sequence of job tasks
c. Identify the hazard of each task
d. propose potential solutions to problems - Answer Document an itemized sequence of job tasks
What does NIOSH stand for?
a. National Institute for Occupational Safety and Health
b. National Institute for Organizations Safety and Health
c. Nationwide Instructions for Occupational Safety and Health
d. Nationwide Instructions for Organizational Safety and Health - Answer National Institute for
Occupational Safety and Health
An employee questions the quality of the materials inside a trailer and pages his/her supervisor to come
to the trailer. It is clear that the contents have been seriously damaged in shipment. Which of the
following actions is appropriate?
a. Reject the load to the carrier
b. Call the inbound planner to come count the contents of the shipment
c. Only accept the undamaged portions
d. Accept the load and take it to the line for use - Answer Reject the load to the carrier
Several federal agencies enforce regulations concerning the workplace. The federal agency concerned
with enforcement of safety regulations is:
a. EPA
b. OSHA
c. DOT
d. NIOSH - Answer OSHA
, Which of the following is NOT a requirement of a fixed ladder
a. The length of the rung has to be 16"
b. The distance between rungs shall exceed 16"
c. Cages are required on all fixed ladders over 20"
d. When required, landing platforms must be a minimum of 24" x 30" - Answer The distance between
rungs shall exceed 16"
Audits of environmental or quality systems within an organization typically include all of the following
except:
a. Detailed instructions on how to improve the system
b. A list of operational metrics that will be used to track performance
c. Timelines for corrective actions to be taken
d. Individuals who are responsible for implementing the corrective action - Answer Detailed
instructions on how to improve the system
A job safety analysis should NOT be conducted by?
a. A maintenance worker
b. An operator
c. A project engineer
d. An OSHA representative - Answer An OSHA representative
The risk of injury for new employees is ___ than for those with experience
a. Less Likely
b. More likely
c. About the same
d. Exactly the same - Answer More Likely
In most manufacturing plants, the chance of being exposed to blood-borne pathogens is relatively small.
In these plants, the greatest risk of exposure is:
Questions 100% Well Answered.
The first step to a job safety analysis is to:
A. Prepare a list of potential problems
b. document an itemized sequence of job tasks
c. Identify the hazard of each task
d. propose potential solutions to problems - Answer Document an itemized sequence of job tasks
What does NIOSH stand for?
a. National Institute for Occupational Safety and Health
b. National Institute for Organizations Safety and Health
c. Nationwide Instructions for Occupational Safety and Health
d. Nationwide Instructions for Organizational Safety and Health - Answer National Institute for
Occupational Safety and Health
An employee questions the quality of the materials inside a trailer and pages his/her supervisor to come
to the trailer. It is clear that the contents have been seriously damaged in shipment. Which of the
following actions is appropriate?
a. Reject the load to the carrier
b. Call the inbound planner to come count the contents of the shipment
c. Only accept the undamaged portions
d. Accept the load and take it to the line for use - Answer Reject the load to the carrier
Several federal agencies enforce regulations concerning the workplace. The federal agency concerned
with enforcement of safety regulations is:
a. EPA
b. OSHA
c. DOT
d. NIOSH - Answer OSHA
, Which of the following is NOT a requirement of a fixed ladder
a. The length of the rung has to be 16"
b. The distance between rungs shall exceed 16"
c. Cages are required on all fixed ladders over 20"
d. When required, landing platforms must be a minimum of 24" x 30" - Answer The distance between
rungs shall exceed 16"
Audits of environmental or quality systems within an organization typically include all of the following
except:
a. Detailed instructions on how to improve the system
b. A list of operational metrics that will be used to track performance
c. Timelines for corrective actions to be taken
d. Individuals who are responsible for implementing the corrective action - Answer Detailed
instructions on how to improve the system
A job safety analysis should NOT be conducted by?
a. A maintenance worker
b. An operator
c. A project engineer
d. An OSHA representative - Answer An OSHA representative
The risk of injury for new employees is ___ than for those with experience
a. Less Likely
b. More likely
c. About the same
d. Exactly the same - Answer More Likely
In most manufacturing plants, the chance of being exposed to blood-borne pathogens is relatively small.
In these plants, the greatest risk of exposure is:
