MSF BASIC RIDER COURSE FINAL EVALUATION QUESTIONS WITH
SOLUTIONS GRADED A+ 2025/2026
✔✔Shifting to a lower gear and easing out the throttle. - ✔✔What is engine braking?
✔✔Fully squeezed - ✔✔What is the position of the clutch lever when making a stop?
✔✔1 - your motorcycle is a good fit
2 - your motorcycle is inspected before each ride
3 - you are using proper protective gear
4 - you have a good mental attitude with safety as your priority - ✔✔List the four
preparations.
✔✔Seat height should be low enough so you can reach the ground and support the
motorcycle; motorcycle size should be right for your strength and skill level so you can
handle it well; adjust the controls or replace the seat to fit you better - ✔✔How should
your motorcycle fit you?
✔✔A pre-ride inspection routine. T-tires and wheels; C-controls; L-lights and mirrors; O-
oil and other fluids; C-chassis; S-stands - ✔✔What is T-CLOCS and what does each
letter stand for?
✔✔1 - helps keep you comfortable and focused
2 - helps keep your body protected
3 - may help you be much more visible in traffic - ✔✔List the three primary purposes of
riding gear.
✔✔All The Gear, All The Time - ✔✔What does ATGATT mean?
✔✔Head injuries - ✔✔What type of injury accounts for the majority of motorcycle-related
deaths?
✔✔1 - outer shell keeps objects from reaching the head and absorbs impact
2 - impact-absorbing liner absorbs shock and spreads impact forces throughout the
helmet
3 - comfort padding helps with comfort and fit
4 - retention system fastens the helmet on your head - ✔✔What are the four basic parts
of a helmet?
✔✔Full-face helmet offers more protection for the face and chin. - ✔✔What is the
difference between a full-face-coverage helmet and three-quarter-coverage helmet?
✔✔DOT and possibly ECE or Snell - ✔✔What stickers are likely to indicate a well-made
helmet?
, ✔✔Snugly - ✔✔How should a helmet fit?
✔✔Don't use harsh chemicals; leave a damp towel on the helmet for a few minutes then
wipe off bugs; wash removable pads as needed; use products to eliminate bacteria and
mildew; avoid dropping your helmet; put it bottom side down; and do not drill holes.
modify the retention system, paint it, or attach items to the exterior - ✔✔What are some
tips to care for a helmet?
✔✔No (they may not seal out wind and dust) - ✔✔Are ordinary glasses or sunglasses
alone sufficient eye protection?
✔✔Face shields and goggles - ✔✔What types of eye and/or face protection can a rider
choose?
✔✔1 - flip up shields should be down when you ride
2 - face shields and goggles should be free of scratches (impact resistant, clean)
3 - clear shields or goggles should be used at night
4 - goggles are worn over the helmet - ✔✔Name four considerations about eye and face
protection.
✔✔Helps protect from riding hazards; provide good grip on pavement and keep feet on
footrests; provide protection against foot and ankle injuries. - ✔✔What is the value of
appropriate footwear?
✔✔Protect hands from weather, improve grip, protect in a fall and from flying debris;
outside seams; curved fingers; may have armor for greater protection; insulated gloves
help in cold weather; gauntlets keep cold air from going up sleeves. - ✔✔What features
of a full-fingered glove help a rider?
✔✔Designed to fit while in a riding position; flaps help seal out the wind; zippers for
ventilation; extra padding (armor) provides more protection - ✔✔What is the value of
motorcycle-specific clothing?
✔✔Wear bright colors during the day; use reflective vest at night. - ✔✔How can
motorcycle riding gear make you more visible?
✔✔Keep you dry and warm; bright colors; elastic for snug and secure fit; high collar;
zips up; wide flaps across openings; waterproof gloves and boot covers; dress in layers
with a windproof outer layer - ✔✔What are some features your gear should have if you
are riding in rain or cold weather?
✔✔Lower than normal body temperature. - ✔✔Define hypothermia.
SOLUTIONS GRADED A+ 2025/2026
✔✔Shifting to a lower gear and easing out the throttle. - ✔✔What is engine braking?
✔✔Fully squeezed - ✔✔What is the position of the clutch lever when making a stop?
✔✔1 - your motorcycle is a good fit
2 - your motorcycle is inspected before each ride
3 - you are using proper protective gear
4 - you have a good mental attitude with safety as your priority - ✔✔List the four
preparations.
✔✔Seat height should be low enough so you can reach the ground and support the
motorcycle; motorcycle size should be right for your strength and skill level so you can
handle it well; adjust the controls or replace the seat to fit you better - ✔✔How should
your motorcycle fit you?
✔✔A pre-ride inspection routine. T-tires and wheels; C-controls; L-lights and mirrors; O-
oil and other fluids; C-chassis; S-stands - ✔✔What is T-CLOCS and what does each
letter stand for?
✔✔1 - helps keep you comfortable and focused
2 - helps keep your body protected
3 - may help you be much more visible in traffic - ✔✔List the three primary purposes of
riding gear.
✔✔All The Gear, All The Time - ✔✔What does ATGATT mean?
✔✔Head injuries - ✔✔What type of injury accounts for the majority of motorcycle-related
deaths?
✔✔1 - outer shell keeps objects from reaching the head and absorbs impact
2 - impact-absorbing liner absorbs shock and spreads impact forces throughout the
helmet
3 - comfort padding helps with comfort and fit
4 - retention system fastens the helmet on your head - ✔✔What are the four basic parts
of a helmet?
✔✔Full-face helmet offers more protection for the face and chin. - ✔✔What is the
difference between a full-face-coverage helmet and three-quarter-coverage helmet?
✔✔DOT and possibly ECE or Snell - ✔✔What stickers are likely to indicate a well-made
helmet?
, ✔✔Snugly - ✔✔How should a helmet fit?
✔✔Don't use harsh chemicals; leave a damp towel on the helmet for a few minutes then
wipe off bugs; wash removable pads as needed; use products to eliminate bacteria and
mildew; avoid dropping your helmet; put it bottom side down; and do not drill holes.
modify the retention system, paint it, or attach items to the exterior - ✔✔What are some
tips to care for a helmet?
✔✔No (they may not seal out wind and dust) - ✔✔Are ordinary glasses or sunglasses
alone sufficient eye protection?
✔✔Face shields and goggles - ✔✔What types of eye and/or face protection can a rider
choose?
✔✔1 - flip up shields should be down when you ride
2 - face shields and goggles should be free of scratches (impact resistant, clean)
3 - clear shields or goggles should be used at night
4 - goggles are worn over the helmet - ✔✔Name four considerations about eye and face
protection.
✔✔Helps protect from riding hazards; provide good grip on pavement and keep feet on
footrests; provide protection against foot and ankle injuries. - ✔✔What is the value of
appropriate footwear?
✔✔Protect hands from weather, improve grip, protect in a fall and from flying debris;
outside seams; curved fingers; may have armor for greater protection; insulated gloves
help in cold weather; gauntlets keep cold air from going up sleeves. - ✔✔What features
of a full-fingered glove help a rider?
✔✔Designed to fit while in a riding position; flaps help seal out the wind; zippers for
ventilation; extra padding (armor) provides more protection - ✔✔What is the value of
motorcycle-specific clothing?
✔✔Wear bright colors during the day; use reflective vest at night. - ✔✔How can
motorcycle riding gear make you more visible?
✔✔Keep you dry and warm; bright colors; elastic for snug and secure fit; high collar;
zips up; wide flaps across openings; waterproof gloves and boot covers; dress in layers
with a windproof outer layer - ✔✔What are some features your gear should have if you
are riding in rain or cold weather?
✔✔Lower than normal body temperature. - ✔✔Define hypothermia.
