1
NCCCO OVERHEAD CRANE EXAM ACTUAL EXAM
100 QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A
•
Overhead cranes with more than one hoisting unit shall have? - CORRECT
ANSWER>>Its rated load marked on it.
How often does O.S.H.A. require a written wire rope inspection? - CORRECT
ANSWER>>Once a month
What is the purpose of the "E" (Emergency) stop on an overhead crane? -
CORRECT ANSWER>>Removes power to entire crane.
Most loads should be rigged to within how many degrees of level? - CORRECT
ANSWER>>5
According to ASME B30.2, what is the safety factor for rigging? - CORRECT
ANSWER>>5 to 1
According to O.S.H.A. frequent inspections shall be performed? - CORRECT
ANSWER>>Daily to monthly
According to ASME B30.2 a frequent inspection must be performed by a? -
CORRECT ANSWER>>Designated person
According to OSHA, the maximum twist of the hook can't exceed? - CORRECT
ANSWER>>10 degrees
, 2
When inspecting electrical contacts, what are the signs they are bad? - CORRECT
ANSWER>>Pitted or burned
According to ASME B30.2, what type of fire extinguisher is required for overhead
cranes? - CORRECT ANSWER>>10BC
Before leaving an overhead crane unattended, attached loads should be? -
CORRECT ANSWER>>Lowered to the floor
Before using your hand to steady any load, you should? - CORRECT
ANSWER>>Follow company policy
According to OSHA, the rated capacity of all overhead cranes shall be? - CORRECT
ANSWER>>Clearly marked on the side of the crane
When attaching spreaders to any load, you must keep in mind that? - CORRECT
ANSWER>>The lower the spreader angle the greater the tension
By order of hitch strength, which is correct?
a. Vertical, basket, choker
b. Basket, vertical, choker
c. Basket, choker, vertical
d. Choker, basket, vertical - CORRECT ANSWER>>Basket, vertical, choker
According to OSHA, the maximum hook throat opening must not exceed? -
CORRECT ANSWER>>15% of its original size
How many cubic feet is in a rectangular object that measures S At. X3 At. X2 ft.? -
CORRECT ANSWER>>30 cubic feet
An object weighs 150 lbs per cubic foot and measures 4 ft. X3 A. X3 ft., what is its
weight? - CORRECT ANSWER>>5,400 lbs
NCCCO OVERHEAD CRANE EXAM ACTUAL EXAM
100 QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A
•
Overhead cranes with more than one hoisting unit shall have? - CORRECT
ANSWER>>Its rated load marked on it.
How often does O.S.H.A. require a written wire rope inspection? - CORRECT
ANSWER>>Once a month
What is the purpose of the "E" (Emergency) stop on an overhead crane? -
CORRECT ANSWER>>Removes power to entire crane.
Most loads should be rigged to within how many degrees of level? - CORRECT
ANSWER>>5
According to ASME B30.2, what is the safety factor for rigging? - CORRECT
ANSWER>>5 to 1
According to O.S.H.A. frequent inspections shall be performed? - CORRECT
ANSWER>>Daily to monthly
According to ASME B30.2 a frequent inspection must be performed by a? -
CORRECT ANSWER>>Designated person
According to OSHA, the maximum twist of the hook can't exceed? - CORRECT
ANSWER>>10 degrees
, 2
When inspecting electrical contacts, what are the signs they are bad? - CORRECT
ANSWER>>Pitted or burned
According to ASME B30.2, what type of fire extinguisher is required for overhead
cranes? - CORRECT ANSWER>>10BC
Before leaving an overhead crane unattended, attached loads should be? -
CORRECT ANSWER>>Lowered to the floor
Before using your hand to steady any load, you should? - CORRECT
ANSWER>>Follow company policy
According to OSHA, the rated capacity of all overhead cranes shall be? - CORRECT
ANSWER>>Clearly marked on the side of the crane
When attaching spreaders to any load, you must keep in mind that? - CORRECT
ANSWER>>The lower the spreader angle the greater the tension
By order of hitch strength, which is correct?
a. Vertical, basket, choker
b. Basket, vertical, choker
c. Basket, choker, vertical
d. Choker, basket, vertical - CORRECT ANSWER>>Basket, vertical, choker
According to OSHA, the maximum hook throat opening must not exceed? -
CORRECT ANSWER>>15% of its original size
How many cubic feet is in a rectangular object that measures S At. X3 At. X2 ft.? -
CORRECT ANSWER>>30 cubic feet
An object weighs 150 lbs per cubic foot and measures 4 ft. X3 A. X3 ft., what is its
weight? - CORRECT ANSWER>>5,400 lbs
