INP 401 EPIC EXAM, BRAND NEW
EXAM QUESTIONS WITH 100%
CORRECT ANSWERS, ALL GRADED
A+, LATEST EXPERT PREMIUM
UPDATE(2025-2026)|>100%
GUARANTEED SUCCESS.
2-At which of the three levels for procedure order configuration (Procedure,
Procedure Category, or System Definitions) could you potentially do ALL of your
build? Why would this be a bad idea? - ANSWER✅✅ It is possible to make all
settings at the Procedure (EAP) level. However, doing so would be inefficient and
difficult to maintain.
2-True or False? Linking your Procedures to a Procedure Category is optional. -
ANSWER✅✅ False. All Procedures must be linked to a Procedure Category. The link
is made in the Procedure record.
2-On which screen are the buttons for priority and frequency that display in the
Order Composer configured? - ANSWER✅✅ Buttons for priority and frequency are
, set on the Inpatient Order Composer Button Selections - I screen (also referred to as
the tic-tac-toe screen).
2-At which of the three levels for procedure order configuration (Procedure,
Procedure Category, or System Definitions) can you set a default frequency? -
ANSWER✅✅ A default frequency can be set at the Procedure (EAP) or Procedure
Category (EDP) level. Refer to the Where Can Settings Be Made table earlier in this
chapter.
3-You remove Priority from the display items for your diet orders. But when you test
one of your diet orders, Priority shows up as the last display item. What might be
causing that? - ANSWER✅✅ Priority is probably a required item. Check the item
control fields in the Procedure, Procedure Category, and System Definitions. A
required item will always display, even if it's not a display item.
3-True or False? If there are Item Control settings in OCCs at both the Procedure and
Procedure Category level, the settings at the Category level will not affect the order.
- ANSWER✅✅ False. Item Control is cumulative, so settings from both the Category
and Procedure level OCCs will affect the order.
3-Your facility decides that all diet orders don't need to display a Priority.
How can you make that change? At which level (Procedure, Procedure Category, or
System Definitions) would you make that change? - ANSWER✅✅ If you don't want
to display a Priority, Priority should NOT be listed as a display item in the OCC. You'll
also need to use item control to set Priority to "not required" in the OCC record.
(Remember, required items will always display!)
These changes should be made in the OCC record attached to the Procedure
Category for diet orders.
3-At which Procedure levels does the OCC attach? - ANSWER✅✅ Procedure (EAP),
Procedure Category (EDP), and System Definitions (LSD)
3-At which Procedure levels do the Process Instructions (SmartText) attach? -
ANSWER✅✅ Procedure (EAP) and Procedure Category (EDP)
3-28 What value request cannot be removed from an order. - ANSWER✅✅
Frequency
It is hard coded and not possible to make Frequency not required by an order.
4-True or False? To get a yellow yield sign to appear next to a question in the Order
Composer, set questions to "Recommended" using Item Control in the OCC record. -
ANSWER✅✅ False. Questions cannot be marked as Recommended in Item Control.
Instead, they must be marked as Advised in the question record and the
Requirements for questions field in the Profile set to "Recommend advised only" to
make them Recommended.
EXAM QUESTIONS WITH 100%
CORRECT ANSWERS, ALL GRADED
A+, LATEST EXPERT PREMIUM
UPDATE(2025-2026)|>100%
GUARANTEED SUCCESS.
2-At which of the three levels for procedure order configuration (Procedure,
Procedure Category, or System Definitions) could you potentially do ALL of your
build? Why would this be a bad idea? - ANSWER✅✅ It is possible to make all
settings at the Procedure (EAP) level. However, doing so would be inefficient and
difficult to maintain.
2-True or False? Linking your Procedures to a Procedure Category is optional. -
ANSWER✅✅ False. All Procedures must be linked to a Procedure Category. The link
is made in the Procedure record.
2-On which screen are the buttons for priority and frequency that display in the
Order Composer configured? - ANSWER✅✅ Buttons for priority and frequency are
, set on the Inpatient Order Composer Button Selections - I screen (also referred to as
the tic-tac-toe screen).
2-At which of the three levels for procedure order configuration (Procedure,
Procedure Category, or System Definitions) can you set a default frequency? -
ANSWER✅✅ A default frequency can be set at the Procedure (EAP) or Procedure
Category (EDP) level. Refer to the Where Can Settings Be Made table earlier in this
chapter.
3-You remove Priority from the display items for your diet orders. But when you test
one of your diet orders, Priority shows up as the last display item. What might be
causing that? - ANSWER✅✅ Priority is probably a required item. Check the item
control fields in the Procedure, Procedure Category, and System Definitions. A
required item will always display, even if it's not a display item.
3-True or False? If there are Item Control settings in OCCs at both the Procedure and
Procedure Category level, the settings at the Category level will not affect the order.
- ANSWER✅✅ False. Item Control is cumulative, so settings from both the Category
and Procedure level OCCs will affect the order.
3-Your facility decides that all diet orders don't need to display a Priority.
How can you make that change? At which level (Procedure, Procedure Category, or
System Definitions) would you make that change? - ANSWER✅✅ If you don't want
to display a Priority, Priority should NOT be listed as a display item in the OCC. You'll
also need to use item control to set Priority to "not required" in the OCC record.
(Remember, required items will always display!)
These changes should be made in the OCC record attached to the Procedure
Category for diet orders.
3-At which Procedure levels does the OCC attach? - ANSWER✅✅ Procedure (EAP),
Procedure Category (EDP), and System Definitions (LSD)
3-At which Procedure levels do the Process Instructions (SmartText) attach? -
ANSWER✅✅ Procedure (EAP) and Procedure Category (EDP)
3-28 What value request cannot be removed from an order. - ANSWER✅✅
Frequency
It is hard coded and not possible to make Frequency not required by an order.
4-True or False? To get a yellow yield sign to appear next to a question in the Order
Composer, set questions to "Recommended" using Item Control in the OCC record. -
ANSWER✅✅ False. Questions cannot be marked as Recommended in Item Control.
Instead, they must be marked as Advised in the question record and the
Requirements for questions field in the Profile set to "Recommend advised only" to
make them Recommended.
