IBEW TEST 3 CORRECT 100%
what are some of the things that can be done to make cutting and threading conduit
a neat job? check all that apply. - ANSWERuse a container for the scraps, and use a
sandbox or mat to catch oil drippings
why am i an employer insist that the electrical worker present a neat appearance -
ANSWERA neat appearance can be a great asset to the contractor's reputation.
ring and jewlery worn on the job are hazardous to a technician - ANSWERtrue
who is responsible for work performed on the project - ANSWERthe journeyman
an apprentice should only pick up and clean when told - ANSWERfalse
tools, material, equipment, and trash should be left for cleanup after all the day's
projects have been completed - ANSWERfalse
a good apprentice anticipates the needs of the journeyman by ? - ANSWERmentally
viewing the job and breaking down the tasks; the apprentice can then plan the tools
and materials that will be needed
when someone is working on a ladder, it should whenever possible, be secured at
the top. - ANSWERtrue
which of the following is an unsafe act that might be found with ladder -
ANSWEROverreaching from a ladder
what does the term "base material" refer to with respect to masonry fasterners -
ANSWERconcrete, brick, or block
what is the rule of thumb for spacing of concrete fastener - ANSWER10 anchor
diameters
How should a ladder be carried? - ANSWERCarry the ladder by placing the upper
side rail on the shoulder and the bottom rail resting against the body.
what is the proper way to ascend and descend a ladder - ANSWERyou face the
ladder
which of the following is an unsafe act that might be found with ladder -
ANSWERCarrying too heavy a load up a ladder
extension ladders should have at least 3 feet overlap between sections one
extended - ANSWERtrue
what are some of the things that can be done to make cutting and threading conduit
a neat job? check all that apply. - ANSWERuse a container for the scraps, and use a
sandbox or mat to catch oil drippings
why am i an employer insist that the electrical worker present a neat appearance -
ANSWERA neat appearance can be a great asset to the contractor's reputation.
ring and jewlery worn on the job are hazardous to a technician - ANSWERtrue
who is responsible for work performed on the project - ANSWERthe journeyman
an apprentice should only pick up and clean when told - ANSWERfalse
tools, material, equipment, and trash should be left for cleanup after all the day's
projects have been completed - ANSWERfalse
a good apprentice anticipates the needs of the journeyman by ? - ANSWERmentally
viewing the job and breaking down the tasks; the apprentice can then plan the tools
and materials that will be needed
when someone is working on a ladder, it should whenever possible, be secured at
the top. - ANSWERtrue
which of the following is an unsafe act that might be found with ladder -
ANSWEROverreaching from a ladder
what does the term "base material" refer to with respect to masonry fasterners -
ANSWERconcrete, brick, or block
what is the rule of thumb for spacing of concrete fastener - ANSWER10 anchor
diameters
How should a ladder be carried? - ANSWERCarry the ladder by placing the upper
side rail on the shoulder and the bottom rail resting against the body.
what is the proper way to ascend and descend a ladder - ANSWERyou face the
ladder
which of the following is an unsafe act that might be found with ladder -
ANSWERCarrying too heavy a load up a ladder
extension ladders should have at least 3 feet overlap between sections one
extended - ANSWERtrue
