OSHA 1926 - Exam Part 2 Questions & Answers Latest Updated 100% Pass
OSHA 1926 - Exam Part 2 Questions & Answers
Latest Updated 100% Pass
Practice questions for this set
Learn 1/7 Study with Learn
A welder is lowered through a small opening on a lifeline. How is he
protected?
Give this one a try later!
1 The welder should rely on a buddy system for safety.
An attendant with a pre-planned rescue procedure shall be stationed outside to
observe the welder and be capable of putting rescue operations into effect.
3 A safety net should be installed below the opening.
4 The welder must wear a parachute for safety.
@LOS LIBROS
, OSHA 1926 - Exam Part 2 Questions & Answers Latest Updated 100% Pass
Terms In This Set (60)
When a special wrench is Leave the wrench in position on the stem for
required to open a fuel emergency shut-off.
gas cylinder, you shall?
Oxygen and acetylene At the beginning of every shift.
hoses shall be inspected
how often?
Whenever practical, all Shielded by noncombustible screens.
arc welding and cutting
operations shall be ?
Oxygen from a shall Ventilation purposes, comfort cooling, blowing dust
should never be used from clothing or for cleaning the work area.
for?
A welder is lowered An attendant with a pre-planned rescue procedure
through a small opening shall be stationed outside to observe the welder
on a lifeline. How is he and be capable of putting rescue operations into
protected? effect.
A suspension scaffold Catenary scaffold
consisting of a platform
essentially supported by
horizontal and parallel
ropes with a vertical pick-
up is a?
Scaffold components Its own weight and four times the maximum
must be able to support intended load.
what without failure?
When using scaffolding 1 inch
boards, the space
between the boards
cannot be more than?
@LOS LIBROS
OSHA 1926 - Exam Part 2 Questions & Answers
Latest Updated 100% Pass
Practice questions for this set
Learn 1/7 Study with Learn
A welder is lowered through a small opening on a lifeline. How is he
protected?
Give this one a try later!
1 The welder should rely on a buddy system for safety.
An attendant with a pre-planned rescue procedure shall be stationed outside to
observe the welder and be capable of putting rescue operations into effect.
3 A safety net should be installed below the opening.
4 The welder must wear a parachute for safety.
@LOS LIBROS
, OSHA 1926 - Exam Part 2 Questions & Answers Latest Updated 100% Pass
Terms In This Set (60)
When a special wrench is Leave the wrench in position on the stem for
required to open a fuel emergency shut-off.
gas cylinder, you shall?
Oxygen and acetylene At the beginning of every shift.
hoses shall be inspected
how often?
Whenever practical, all Shielded by noncombustible screens.
arc welding and cutting
operations shall be ?
Oxygen from a shall Ventilation purposes, comfort cooling, blowing dust
should never be used from clothing or for cleaning the work area.
for?
A welder is lowered An attendant with a pre-planned rescue procedure
through a small opening shall be stationed outside to observe the welder
on a lifeline. How is he and be capable of putting rescue operations into
protected? effect.
A suspension scaffold Catenary scaffold
consisting of a platform
essentially supported by
horizontal and parallel
ropes with a vertical pick-
up is a?
Scaffold components Its own weight and four times the maximum
must be able to support intended load.
what without failure?
When using scaffolding 1 inch
boards, the space
between the boards
cannot be more than?
@LOS LIBROS
